Its a hbfp with xeon frame, 8deg woodies, 3900kv bl motor, dd tail (gws w/ 4025) running a 1500mah 3s. when cotrolling rudder in hover or slow flight or no wind it is fine, but I am flying more extreme now and need more consistancy with the tail. had some close calls with a little wind where even full rudder barely corrected in time. pyros in little wind are either super slow or super fast. LOVE this heli but I might just be fiending for more. been waiting for the hk250
Yea, sounds like you are ready to move up. CP will handle wind way better than FP, and anything with a belt drive tail will be moving past the stick helis with a motor on the tail.
If you are not an experienced builder, be careful with the HKs. They are cheap, but you have to deal with some issues during build.
im at the point now where the tail is just not smooth, accurate, or strong enough to fly outside with a little wind. I find myself constantly fighting the tail, instead of flying the way I want. what is the cheapest way to convert to a belt tail? I have an HK 450 that i'm waitng for parts. did you use the whole boom from a 450?
I am using a Outrage XP20 3S1P 11.1V 1300mAH 20C. I usually limit the flight time t about 8 minutes, but I can push it to 10, but I don't like to drain the batts that much.
Keep an eye out, the next vid of the Guru-FP will have the Bell-Hiller mod installed, and a little longer main shaft. I also will be building a Guru-King2 in the next week or so.
It has a 3800kv HDX motor, Dynam 25A ESC, Spektrum AR6100 receiver, and all HS55 servos, powered by an outrage 1350mah battery. The head is all Xtreme, swash, paddle frame, and blade grips. The blades are Xtreme 8 degree. Flybar, paddles, and tail rotors are off a King 2. Landing gear is from a Belt CP, and the pipes are HDX. Canopy is a cut down from a Trex 450.
I will be putting the Xtreme mixing arms on it soon, just to see what they are like.
what canopy is that and where did you get it from, please?
great heli
yeogav 1 year ago
what blades are those? look like woodies 6 or 8 degree? Looked good!
yeogav 1 year ago
Comment removed
yeogav 1 year ago
Comment removed
yeogav 1 year ago
Its a hbfp with xeon frame, 8deg woodies, 3900kv bl motor, dd tail (gws w/ 4025) running a 1500mah 3s. when cotrolling rudder in hover or slow flight or no wind it is fine, but I am flying more extreme now and need more consistancy with the tail. had some close calls with a little wind where even full rudder barely corrected in time. pyros in little wind are either super slow or super fast. LOVE this heli but I might just be fiending for more. been waiting for the hk250
ant141110 2 years ago
Yea, sounds like you are ready to move up. CP will handle wind way better than FP, and anything with a belt drive tail will be moving past the stick helis with a motor on the tail.
If you are not an experienced builder, be careful with the HKs. They are cheap, but you have to deal with some issues during build.
fly97 2 years ago
im at the point now where the tail is just not smooth, accurate, or strong enough to fly outside with a little wind. I find myself constantly fighting the tail, instead of flying the way I want. what is the cheapest way to convert to a belt tail? I have an HK 450 that i'm waitng for parts. did you use the whole boom from a 450?
ant141110 2 years ago
What heli are you fighting the tail on?
The heli in this vid is a Guru-Z belt drive conversion kit. I got the kit from heli-fever, and added Esky and Xtreme fixed pitch parts.
fly97 2 years ago
are you running with a 2s or 3s? and what kinda of flight times are you getting?
ant141110 2 years ago
I am using a Outrage XP20 3S1P 11.1V 1300mAH 20C. I usually limit the flight time t about 8 minutes, but I can push it to 10, but I don't like to drain the batts that much.
Keep an eye out, the next vid of the Guru-FP will have the Bell-Hiller mod installed, and a little longer main shaft. I also will be building a Guru-King2 in the next week or so.
fly97 2 years ago
What kind of components / electronics you have on it?
LymeDiseasePublisher 2 years ago
It has a 3800kv HDX motor, Dynam 25A ESC, Spektrum AR6100 receiver, and all HS55 servos, powered by an outrage 1350mah battery. The head is all Xtreme, swash, paddle frame, and blade grips. The blades are Xtreme 8 degree. Flybar, paddles, and tail rotors are off a King 2. Landing gear is from a Belt CP, and the pipes are HDX. Canopy is a cut down from a Trex 450.
I will be putting the Xtreme mixing arms on it soon, just to see what they are like.
fly97 2 years ago
Still waiting to see some inverted stunts and thangs.
georgeeye 3 years ago