Just too low rotation in normal mode. In Idle it looks normal to me.
Happened to mine before I increase rotation in normal mode.
You must see your throttle curve.
SupRec 1 year ago
It llooks like you have an up and down movement also. Check to see that your tail blades and main blades are not to tight. If they are it will bounce..
daletheman3 2 years ago
At idel 1-2 it ok i gues, but you must have more speed on normal mode.
this is tail (bob) not wag is due to low rpm,
Up the throttle curve on normal mode an it wil be fine.
TommyStokke 3 years ago
If you tried adjusting the Gain on the gyro well my guess is you have a bind on the rod from the servo to the tail rotor.
It take very little friction to cause a wag.
Make shure the rod is very straight and has free movement.
PaulGrc 3 years ago
Just too low rotation in normal mode. In Idle it looks normal to me.
Happened to mine before I increase rotation in normal mode.
You must see your throttle curve.
SupRec 1 year ago
It llooks like you have an up and down movement also. Check to see that your tail blades and main blades are not to tight. If they are it will bounce..
daletheman3 2 years ago
At idel 1-2 it ok i gues, but you must have more speed on normal mode.
this is tail (bob) not wag is due to low rpm,
Up the throttle curve on normal mode an it wil be fine.
TommyStokke 3 years ago
If you tried adjusting the Gain on the gyro well my guess is you have a bind on the rod from the servo to the tail rotor.
It take very little friction to cause a wag.
Make shure the rod is very straight and has free movement.
PaulGrc 3 years ago