2:35 vinyl is 3mm thick??? human hair??? my friend you are little off.
human hair is avarage 0,1mm
vinyl and 3mm? in that amater plotter u can get like 150 grams force. for 3mm vinyl u will need (i guess) at least 1,5 kg (1500grams). i am not even sure if someone makes 3mm thick vinyl.
i have roland gx-24 plotter (veeery good plotter). price about 1500€ and force is max 250-300 grams and when i cutting 3d carbon vinil (0,5 - 0,7 mm) i have to slow it down to 20 mm/s (max is 500 mm/s).
OMG EVRY1!!! I Just found the COOLEST ZEBRA VINYL for cricut cutters. Just go to ebay and search cricut zebra vinyl. u gotta check it out its awesome. I cant find nething like it newhere.
Yea, excellent video-except for the incorrect explanation of the material thickness (3 millimeters?!), improper technique (applying transfer tape, removing the backing sheet and applying the vinyl), wrong terminology (wax paper) and incorrect information (60 degree blade for cheap cal vinyl?!, just scratch the surface, double faced transfer tape) it's great!!!
Thank you for this video. The settings of pressure medium and blade 4 didn't work for my non-Cricut vinyl but your comments helped me fine tune my system. "it should cut like butter so the blade will just barely cut through the vinyl and leave the paper. I ended up making a single cut repeatedly until the blade cut through the vinyl like butter instead of a jagged edge. That blade depth was 1.5 on my deep cut blade. Hope this helps someone out there!
Hi Jazznjava - you make compelling points, no doubt! He is a reseller though and a popular one at that! Some people have never seen Design Studio software in action so part of the video lets them observe that....just a demo of all the stuff at once! As you stated, definitely NOT needed to cut vinyl. Thanks for watching!
Hmm, This is an interesting video. In it the demonstrator uses every toy cricut sells, and quite frankly he is showing about $600 more stuff than one needs to make that simple cut. It is a poor representation of how simple, cheap and efficient cricut can be.
2:35 vinyl is 3mm thick??? human hair??? my friend you are little off.
human hair is avarage 0,1mm
vinyl and 3mm? in that amater plotter u can get like 150 grams force. for 3mm vinyl u will need (i guess) at least 1,5 kg (1500grams). i am not even sure if someone makes 3mm thick vinyl.
i have roland gx-24 plotter (veeery good plotter). price about 1500€ and force is max 250-300 grams and when i cutting 3d carbon vinil (0,5 - 0,7 mm) i have to slow it down to 20 mm/s (max is 500 mm/s).
michalmichalsk 2 weeks ago
where do i buy vinyl for this machine, i want to stick it on somethin
SRBtuning 2 months ago
insted of using walls; can you also stick it to plexie glass?
melandasdesigns 3 months ago
Did he say where to set your speed?
Dizzylizzyscreations 3 months ago
wow Dan! marry me?? a guy who knows his way round a cricut? be still my heart LOL great job!
TFS
Colette
momoof2 3 months ago
is vinyl the same as contact paper
lisalee2405 5 months ago
looks like a lot of work lol
TheOperababe18 5 months ago
Does it work on Circut Personal?
HarajukuGirl92 6 months ago
Very nice! Thanks.
stampingwithbecky 6 months ago
yes that's THICK hair. 6mm hair omg.
dougcross1 10 months ago
Katie Cotton?
27TJ 10 months ago 2
At 2.32 > "Vinyl is 3mm thick, that's half the thickness of human hair" ...So, we should be looking like Porcupines!?! :oP
pappajinx 1 year ago
Dan you are the man
scheppach69 1 year ago
nice demo...and katie cotton...what a great name hehe
mgblue 1 year ago
You can get transfer tape in rolls , same place you buy the Vinyl - Oracal -It's much cheaper as well :)
GlassyARTmuse 1 year ago
@GlassyARTmuse
Where do you purchase your vinyl & transfer tape?
lunnen81 1 year ago
can u make your own designs?? example: if draw a picture can that be cut on the cricut??
makeupbliss 1 year ago
@makeupbliss , sure can do it on GIMP (free) or Photoshop and have it traced with SCAL - I use my Cricut for sandblasting images and fusing
GlassyARTmuse 1 year ago
Where do you get the roll of Transfer Tape?
BermudaLamb 1 year ago
OMG EVRY1!!! I Just found the COOLEST ZEBRA VINYL for cricut cutters. Just go to ebay and search cricut zebra vinyl. u gotta check it out its awesome. I cant find nething like it newhere.
Hobbymom44 1 year ago
will this be in arlington this year???? please tell me yes:)
bebegurl31291 1 year ago
Comment removed
DCMOFOBACON 2 years ago
Yea, excellent video-except for the incorrect explanation of the material thickness (3 millimeters?!), improper technique (applying transfer tape, removing the backing sheet and applying the vinyl), wrong terminology (wax paper) and incorrect information (60 degree blade for cheap cal vinyl?!, just scratch the surface, double faced transfer tape) it's great!!!
KChez17 2 years ago 2
i was there it was amzing
diablo2freakgirl 2 years ago
Thank you for this video. The settings of pressure medium and blade 4 didn't work for my non-Cricut vinyl but your comments helped me fine tune my system. "it should cut like butter so the blade will just barely cut through the vinyl and leave the paper. I ended up making a single cut repeatedly until the blade cut through the vinyl like butter instead of a jagged edge. That blade depth was 1.5 on my deep cut blade. Hope this helps someone out there!
NWGirl75 2 years ago
Hi Jazznjava - you make compelling points, no doubt! He is a reseller though and a popular one at that! Some people have never seen Design Studio software in action so part of the video lets them observe that....just a demo of all the stuff at once! As you stated, definitely NOT needed to cut vinyl. Thanks for watching!
Obsessedwithscrappin 2 years ago
Hmm, This is an interesting video. In it the demonstrator uses every toy cricut sells, and quite frankly he is showing about $600 more stuff than one needs to make that simple cut. It is a poor representation of how simple, cheap and efficient cricut can be.
jazznjava 2 years ago
I so agree wit you Jazznjava!
A lot of us are looking for simplicity first... just getting started!
mysugarplumcottage 2 years ago
@jazznjava I'm interested how you'd do it differently. Please let us know :)
onlinehoster 1 year ago
@onlinehoster okay let me get thru the weekend and i will be back. thanks.
jazznjava 1 year ago
Very nice!!!! thanks for sharing!!!
reynux 2 years ago
Thanks for the great video!
When can I purchase transfer tape on a big role like the one you used?
mnothvogel 2 years ago
Dan,
EXCELLENT Video. I am ready to try my vinyl. Great instruction and great reasoning at the end.
It is so good to have a CLEAR step by step instructional video that is easy to relate to and so easy to understand.
Jann
Yorkieyodaldog 2 years ago