MODIFYING THE TAILSTOCK Part 5 of 5 "HD"

[peppermark1]

Very nicely done - you make a good point. I haven't use my tailstock all that much an at best it is adequate but could use a Luiz Ally make over. Like the cost effective way you approach & resolve this issues. Your choice of background music is also commendable. Thank you for sharing. PS

[ericska]

Thank you, Shifu! Too many stuff to learn from your videos!!

[tryally]

Thanks too Eric.

I'm happy very with your comment.

Soon I will post my new videos now in full HD quality and I hope your appreciation as well.

Luiz Ally

[Films4You]

Yes, I like your series and your Machine Shop videos, keep up the good work

[tryally]

@Films4You

Thank you so much for your comment.

Kindest regards from Brazil.

Luiz Ally

[Films4You]

@tryally I like your Machine Tool Videos I list them in my Machine Shop videos on my channel.

You like others I list, show a TON of skill and are very helpful to other users.

Those playlists iare also posted to my MillEngine(dot)com website

[123HURST]

Luis

There is no guarantee that a new tailstock would be as accurate as the one you built.

[tryally]

@123HURST

Thank you for you comment.

You are totally right, the result this modification is excellent.

Regards

Luiz Ally

[JimiKiwi]

Nice work. Looks great. Plus, I love the music.

[tryally]

@JimiKiwi

Hi, thanks for your comment,

I love the music too.

Regards

Luizz

[Opaltom]

Very nice job !

[tryally]

@Opaltom

Thank you my friend,

Best wishes.

Luiz

[MarcioHDMarques]

Você importou como estes equipamentos (torno e fresa), diretamente ou via alguma outra empresa?

Aonde eu posso encontra-los e a quais preços?

Abraço.

[tryally]

@MarcioHDMarques

Antigamente tinha representante confiável no Brasil.

Hoje compro diretamente da fábrica nos EUA pelo cartão de crédito.

Entra no site e se cadastra ai vc tem acesso aos preços.

Coloca no google sherlinedirect

você vai gostar do site deles.

Abraço

Luiz

[MarcioHDMarques]

Muito boa idéia!!

Parabéns!

[tryally]

@MarcioHDMarques

Sim Marcio, o resultado depois é muito bom.

Essa modificação resolveu meu problema de furação aqui.

Obrigado por comentar.

Abraço

Luiz

[tuscanland]

HI Luiz, can't thank you enough for the great videos. I have a question about the stepper motors and driver box that you have on your machines. Are they the stock ones from sherline?

[tryally]

@tuscanland Hi, thanks again.

Yes, all my stepper motors and drive box are original Sherline factory.

I like and work very well for my work.

Regards

[tuscanland]

@tryally is the software the emc/linux provided by sherline? I've been paying much attention to your videos and videos posted by others. Do you have familiarity with mach 3? I watched videos of people using mach 3 and it seems very easy to use, but there are no videos on linux.

[tryally]

@tuscanland Yes, EMC/Linux before, today I use mach3 too, is easy and eficient for lathe and mill.

Soon I will post new videos about many things and I will to show the mach3 in action with sherline machines.

The Linux plataform with EMC is very very good but hardware here in my country is complicated, then, with windows XP and mach3 software finish all troubles

[AlexOHolanda]

Luiz, não sou um profissional da mecânica, sou um apaixonado pelo assunto. Esse vídeo ficou muito legal também... Excelente trabalho !!!

[tzkelley]

Thank you for making the video. Your setups and homemade tools are as interesting as the tailstock modification itself.

[tryally]

Thanks for your comment.

Soon I will post new videos.

Regards from Brazil.

Luiz

[tryally]

@tzkelley

Valeu Alex, realmente essa modificação na maquininha deixa ela bem legal.

Antes eu tinha que trocar essa peça a cada 3 meses, agora já anos que só reajusto.

Abraço

Luiz

[YoungJim409]

Hi Luiz, great job on fixing up your tailstock! Thank you very much for taking the time to make these videos, and please thank Carlos for translating for you, too.

Jim

[tryally]

Hi Jim

Thank you very much for your kind words.

Best regards from Brazil

Luiz

[wackedoutdude]

Nice trick mate now if it wears you can adjust it.

[tryally]

Thanks for your comment,

The result is very good

Regards from Brasil

Luiz

[togaida]

Hi tryally, it has been a while since your last video. We miss your machining videos (if not machining shows). I have 2 questions:

1. what type of slitting saw did you use to cut the tailstock (part 1 video)

2. where can I get the lubrication gun you use in the video? (at 3:47)

[tryally]

Hi togaida,

Thank you for the kind words

In part 1 video, I use a disk of German mountain, and his pistol of grease, it is modified by me, it is an instrument of vaccinating Cattle, and work very well with grease.

Regards from Brasil

Luiz

[tryally]

Thanks

Really the result this is perfect

I'm happy with your nice comment

Kind reagards

Luiz

[shaver9876]

amazing machining... please keep your great work, it is like a class for me, an excellent class!

[tryally]

Hi, Shaver9876

Thank you very much for the comment

In the exact moment I'm making a new

video about my micro tools

I hope that you like

Regards

Luiz

[offthewallprinter]

Thank You very much for taking the time to show the world your talents. It is very much appreciated.

Steve

[tryally]

Hi, Steve!

I'm very happy with your comment.

This motivates me more and more to do her

Thank you very much.

Luiz

[trumpy81]

Hi Luiz, excellent videos, very professional.

Could you do a video showing how you grind your carbide cutting tools for the lathe?

Thanks

Andy in Australia

[tryally]

Hi, Andy!

Thanks very much.

The results is very good.

Yes my friend, in my next videos I will show and speak about my micro tools and as sharpen

Luiz

[anjamimo]

Hello Luiz:

I have watched all your videos and want to congratulate you for all your excellent ideas and the way you make them a reality. I know that your work is a good inspiration for all the people that have the tools but feel intimidated by them. Keep the good work and go ahead with your videos!

(P.S.: Brasil has a lot of good musicians, maybe you can use their music as background. What you think?)

[tryally]

Hi anjamimo!! Thank you very much for your the comment.

A great pleasure you also here.

I'm very happy.

Yes, In my next videos I will use popular music of my country

Thanks again.

Luiz

[proaudioguy]

I prefer to hear the lathe noises. So many videos have music. It's very interesting to me to hear the lathe and the mill. I'll have a better idea of the sounds that are GOOD and the sounds that are NOT good.

[latheworks]

been ouit for a couiple of days on business and its great to come back home to find yoiur vids- Such great work! Care free to the point and with great results, intertaining too!

[tryally]

Thanks my friend!

Very special your presence here

Muito obrigado mesmo!! (in portuguese)

Thank you very much even

[dnfwrunkdnfw]

tryally

Very Very good. THANKS

gary

[tryally]

Thank you very much Gary

It's a pleasure for me you here.

My best regards

Luiz

[canbaja5]

nice series Luiz.

you are great with videos now :D.

music is a nice touch.

[tryally]

Some day I will construct a motor with internal combustion here.

I have everything that is needful, knowledge and materials.

My real work is engineer electronics.

Mini lathes and mills is my hobby and I win some money

Thanks for liking of the my videos

My best regards

Luiz

[5150VH3]

Great series of videos Luiz!

Thank You.

[tryally]

Thanks too!

I'm happy for the comment

Luiz

[BauruAgnelli]

Very nice your work as always!

I like your micro tools

keep a good work!

thanks for sharing

Agnelli

[Spunkcnc]

do you have an example with the misalignment before you made the adjustement?

[tryally]

Hi Spunkcnc

I didn't take pictures of it before.

This tailstock in question was already out of service

The inferior part where slides, loses the paint when they are out of center.

I have 4 Sherline lathe here, and that showed in the video belongs to the first one, that is 6 years old.

Regards

Luiz