This turbine is very similar to the Pawlak turbine patented much, much earlier:
patenty.republika.pl/turbina/turbina.htm
The author showed it at an exhibition of patents already in 1984 and patented a year later in 1985.
As I know in 2006 the author of patented solution, Zdzislaw Pawlak provided to a scientist from Taiwan a small working model of his turbine to be tested in the Taiwan university laboratory...
nos gustaría poner tu diseño en nuestro molino ToorWind, creemos que nos puede servir, contacta con nosotros en toorwind@gmail.com , gracias por tu diseño, estamos en contacto.
we would like to put your design in our mill ToorWind, we believe that it can serve us, he contacts us in toorwind@gmail.com, thank you for your design, we are in contact.
If you bolt one of these on to the roof of your car...and wire it up.....You will be able to light Cigarettes all day from your Cigarette lighter.LOL...
Is the inside rotating part kept vertical only with the axis? Or, is it also mounted on the circular periphery around its blades? If it is mounted there, then it will loose rotation because of friction.
Not a electro energetics engineer just two tips from common physics perspective:
Outside blades, used for wind direction, should also rotate. Having them fixed increases amortization of the product at high wind speeds because it introduces structure resistance. I would also experiment with fixing them on a conducting pipe that would surround the axis.
Inside blades could be done more efficient by curving them and fixating under angle relative to the axis (take a look at Tesnic turbines).
I think this is the coolest design I"ve seen yet. It seems to me that the fixed blades on the frame will allow the wind to turn the inside blades, but they also prevent the wind from blowing on the inside wheel on the opposite side. My explanation probably doesn't make sense, but, think about it. if it weren't for the outside fixed blades, then the wind would push against he inside wheel where it doesn't need pushing,,,,Heck I give ujp....
Thanks, don't you think it's a fantastic design??? I've always been bothered by the wind blowing both the front and back of the blades at the same time, as they rotate. I know the back of the blades won't catch as much wind as the front of them, but, still , it hinders the power being produced. This outside blade protection in this design will practically eliminate that problem, I think. I really would like to build one of these myself. I think it's a great idea! ! !
It would actually be more efficient if they took the outter blades and reversed them, put them on the inner section. Don't use 2 sets of blades. The outter blades are actually causing a lot of turbulance on the inside of the set-up. Also, they should only use 3 or 4 blades. This reduces the weight which makes the machine not have to work as hard to get the same amount of rotation and would creat a lot less turbulance which would let the machine run a lot faster and creat more power. RESEARCH
@TWOLF365 The stators are making the thing impervious to wind resistance on the non-active side which is the pitfall of most other VAWT designs. and the angle of the rotors makes every blade on the rotor structure active. I want to know who designed this.
@pcmatt2000 they're not 90 degrees. they're on a 45 degree angle from "perpendicular" to the inner wheel. and angled in such a way that the stators are constantly shunting air onto the useful side of the blade. Genius.
I think the airship guy 's on to something...I also think what if u latch a few magnets at key points and then u don't even need wind. I love those big old airships, we should bring em back and along they way find new purposes for them. Check out books by Jeremy Rifkin, he wrote the "Hydrogen Economy" etc.
i would love it if someone found a way to get the magnets in a constant loop, unfortunately, this is not possible, the magnets will put as much pull on the backside of any blades they push and it will stop fairly soon.. however if they mean attaching magnets and copper coiling to the sides of a turbine, thats a proven and effective way to generate electricity without the need for all the friction in the gears/chain methods.
@NorthernDancer1111 see comment from Frozenyak - I've tried it myself. Used Magnetic line simulators to find ways of using permanent magnets to turn something. Something about magnetic fields does not allow them to push anything except away or pull towards.Setting them up in a fashion you'd expect them to make something turn eventually balances the fields and stops the machine dead. Would make good brakes... :P
Why dont we take a network of 1000s of air ballons& In between attach wind turbines and drop them slowly from 10,000s of feet up, so they produce a days worth of wind energy in 30 minutes - 1 hour >> Store It, Go Back and Do It again ??? Im not an engineer, just some crazy ideas
@riebedebie Oh, yeah < everybody talking about the same bow shit , that just a wind mill as everybody use now. shut up, go to eat your dinner before your mama kick your ass.
I really enjoyed the excess information given by the narration. Almost too much information! Information overload! wow, this narrator knows his physics... Oops wrong video, my bad
This has been flagged as spam show
This turbine is very similar to the Pawlak turbine patented much, much earlier:
patenty.republika.pl/turbina/turbina.htm
The author showed it at an exhibition of patents already in 1984 and patented a year later in 1985.
As I know in 2006 the author of patented solution, Zdzislaw Pawlak provided to a scientist from Taiwan a small working model of his turbine to be tested in the Taiwan university laboratory...
Cynaterka2 1 week ago
Comment removed
Cynaterka2 1 week ago
Comment removed
Cynaterka2 1 week ago
Comment removed
Cynaterka2 1 week ago
Good, I like that you share this video 風力發電 , I wish success always
anakmudajaman 1 week ago
Nice Video 按一下以加入描述 That You Share , So Very Nice Thanks You
Ondelendo 1 week ago
I Really Like The Video From Your 按一下以加入描述...
imegatrone 1 week ago
Your Video Is Very Useful Sharing 風力發電
bundawartini 1 week ago
WORLD RECORD: BIGGEST WIND TURBINE
Visit: windturbinecarriedbywheels.weebly.com
ZERO-NOISE from gears and generators since they're sealed underground.
SAVES THE BIRDS AND BATS since the turbines are slow-moving.
DOES NOT NEED TO OCCUPY A WIDER LANDSCAPE since the turbine can be very tall.
MAY BE LOWER-COST since it can use parts of junked trucks and others.
ELUDES HURRICANE FORCE since the blades automatically close.
HELPS THE WIND ENERGY COMPANIES since it is FREE FOR ALL.
TheServiceWeb 2 weeks ago
FEA LA GUEA MAS LENTA QUE LA CHUCHA
rewheasgrandes 2 months ago
This has been flagged as spam show
Buenos días,
nos gustaría poner tu diseño en nuestro molino ToorWind, creemos que nos puede servir, contacta con nosotros en toorwind@gmail.com , gracias por tu diseño, estamos en contacto.
---------------------------------------------------------------------------------------------
Good days,
we would like to put your design in our mill ToorWind, we believe that it can serve us, he contacts us in toorwind@gmail.com, thank you for your design, we are in contact.
ToorWind 2 months ago
This has been flagged as spam show
Hello !
Savonius Magic - Patent
HookWindRotor System's
YouTube savoniusbalaton's channel
savoniusbalaton 3 months ago
If you bolt one of these on to the roof of your car...and wire it up.....You will be able to light Cigarettes all day from your Cigarette lighter.LOL...
Starcastle3 4 months ago
This has been flagged as spam show
網路資料有關綠能發電機 請教請求打開信件PASSWORD =˙˙˙777b7777電話再連絡bioca77777@gmail.com
bioca77 4 months ago
Is the inside rotating part kept vertical only with the axis? Or, is it also mounted on the circular periphery around its blades? If it is mounted there, then it will loose rotation because of friction.
-.
Mauromoustakos 6 months ago
yOU gOTTA gIVE ME mORE BLADES!!!!
ayerjake 8 months ago
Comment removed
zarkoasenov 8 months ago
Not a electro energetics engineer just two tips from common physics perspective:
Outside blades, used for wind direction, should also rotate. Having them fixed increases amortization of the product at high wind speeds because it introduces structure resistance. I would also experiment with fixing them on a conducting pipe that would surround the axis.
Inside blades could be done more efficient by curving them and fixating under angle relative to the axis (take a look at Tesnic turbines).
zarkoasenov 8 months ago
Super!
piespokladowy 8 months ago
Where is the fucking energy?
perjanan 9 months ago
Where is this turbine? Can you tell the exact address?
vascoodessa 10 months ago
@vascoodessa 台灣 新竹縣竹北市光明六路239巷15弄23號
83410000 10 months ago 13
@83410000 TAIWAN ; XINZHU AREA , ZHUBEI City
dannywmy1 5 months ago
@vascoodessa TAIWAN; XINZHU AREA, ZHUBEI City
dannywmy1 5 months ago
Nice. I like that it tries to protect birds too. Thanks for posting
dirtMcgert5 11 months ago
Finally a energy solution!!!!....Fantastic!!!.....
paulodeamericana1 1 year ago
I think this is the coolest design I"ve seen yet. It seems to me that the fixed blades on the frame will allow the wind to turn the inside blades, but they also prevent the wind from blowing on the inside wheel on the opposite side. My explanation probably doesn't make sense, but, think about it. if it weren't for the outside fixed blades, then the wind would push against he inside wheel where it doesn't need pushing,,,,Heck I give ujp....
billlyh 1 year ago 4
I understand perfectly
Bicious81 1 year ago
@Bicious81
Thanks, don't you think it's a fantastic design??? I've always been bothered by the wind blowing both the front and back of the blades at the same time, as they rotate. I know the back of the blades won't catch as much wind as the front of them, but, still , it hinders the power being produced. This outside blade protection in this design will practically eliminate that problem, I think. I really would like to build one of these myself. I think it's a great idea! ! !
OK55OK55OK 8 months ago
智能工具。
kren2012 1 year ago
@kren2012 Please,tell us more !!!
Macedonianist 1 year ago
Comment removed
njvul3vu 1 year ago
This has been flagged as spam show
It is come from Taiwan
Yahoo!Taiwan->blog-> sujunghsi
njvul3vu 1 year ago
It would actually be more efficient if they took the outter blades and reversed them, put them on the inner section. Don't use 2 sets of blades. The outter blades are actually causing a lot of turbulance on the inside of the set-up. Also, they should only use 3 or 4 blades. This reduces the weight which makes the machine not have to work as hard to get the same amount of rotation and would creat a lot less turbulance which would let the machine run a lot faster and creat more power. RESEARCH
TWOLF365 1 year ago
@TWOLF365 The stators are making the thing impervious to wind resistance on the non-active side which is the pitfall of most other VAWT designs. and the angle of the rotors makes every blade on the rotor structure active. I want to know who designed this.
mrtrivates 1 year ago
@TWOLF365 The turbulence you speak of is likely shaped like a tornado.
mrtrivates 1 year ago
I wonder if the inner blades would be more efficient f they we not 90 degrees???
pcmatt2000 1 year ago
@pcmatt2000 they're not 90 degrees. they're on a 45 degree angle from "perpendicular" to the inner wheel. and angled in such a way that the stators are constantly shunting air onto the useful side of the blade. Genius.
mrtrivates 1 year ago
because of this video i thought of a very complex idea, that will optimize the mechanics,....
shanejohn00 1 year ago
I`ve build a simular wind-turbine and it works very well. ( the comments here are only from stupid guys )
SuperDaddy1964 2 years ago
@SuperDaddy1964 I agree
mrtrivates 1 year ago
I think the airship guy 's on to something...I also think what if u latch a few magnets at key points and then u don't even need wind. I love those big old airships, we should bring em back and along they way find new purposes for them. Check out books by Jeremy Rifkin, he wrote the "Hydrogen Economy" etc.
NorthernDancer1111 2 years ago
the magnet thing has been tested time and time again and it doesnt work.
Frozenyak 2 years ago
i would love it if someone found a way to get the magnets in a constant loop, unfortunately, this is not possible, the magnets will put as much pull on the backside of any blades they push and it will stop fairly soon.. however if they mean attaching magnets and copper coiling to the sides of a turbine, thats a proven and effective way to generate electricity without the need for all the friction in the gears/chain methods.
vexx506 1 year ago
@NorthernDancer1111 see comment from Frozenyak - I've tried it myself. Used Magnetic line simulators to find ways of using permanent magnets to turn something. Something about magnetic fields does not allow them to push anything except away or pull towards.Setting them up in a fashion you'd expect them to make something turn eventually balances the fields and stops the machine dead. Would make good brakes... :P
mrtrivates 1 year ago
Why dont we take a network of 1000s of air ballons& In between attach wind turbines and drop them slowly from 10,000s of feet up, so they produce a days worth of wind energy in 30 minutes - 1 hour >> Store It, Go Back and Do It again ??? Im not an engineer, just some crazy ideas
ILoveGoodFellas 2 years ago
because energy is always relevant meaning you would use the energy you made to get the balloons back up the next day
freakshow2000 2 years ago
well, you're right about the last part
awizardalso 2 years ago
@ILoveGoodFellas crazy, ineffective and stupid too
EcoFascist 2 years ago
hi, i'm an aerodynamic ingeneer, your concept idee is good, but you must recalculate your wings and atack angles
keep on the good work
riebedebie 2 years ago 3
@riebedebie please explain the problems with the design.
mrtrivates 1 year ago
@mrtrivates
Nothing wrong with the system
I m the patent holder of that kind of turbines
but the stator and the rotor are not calculated well
for maximum Betz rentability
(wrong angles and wrong mesures)
see website greenenergy.li
riebedebie 1 year ago
@riebedebie Oh, yeah < everybody talking about the same bow shit , that just a wind mill as everybody use now. shut up, go to eat your dinner before your mama kick your ass.
killerbug881 1 year ago
Interesting concept for a wind turbine, any angle that the wind comes from gets directed to flow into the turnbine's rotational direction.
tomo123zz 2 years ago
@tomo123zz That's what I said!
mrtrivates 1 year ago
alanstrike,,llloolll no its not a screensaver but an energysaver,,,good joke
tordherflower 2 years ago
Is this a screensaver?
alanstarkie2001 2 years ago
This has been flagged as spam show
That's truly amazing! I slashed my electric bill in half! look here: solar.xfollow.me (Copy to your browser's address bar)
gdolim8 2 years ago
This has got to be the dumbest, if thy are trying to sell them to bad thy don't give info.
thepvcbikeguy 2 years ago
I really enjoyed the excess information given by the narration. Almost too much information! Information overload! wow, this narrator knows his physics... Oops wrong video, my bad
kaduisaui 2 years ago
You need to turn off the mike if your not going to talk!
thepvcbikeguy 2 years ago
You need to move away from the mike to breath!
teruokun 2 years ago
Where the hell did the hamster go!?!?
Goedehoop 3 years ago 34
Hahahaha!
Mutske161 3 years ago
Hmm too informative!:)
rmsgbr 3 years ago 14
Comment removed
njvul3vu 1 year ago
Comment removed
njvul3vu 1 year ago
Wasn das?Ein umgedrehtes Hamsterrad?
pankipinki 3 years ago
Nice builded :o)
Energermany 3 years ago