A while ago i say a leather jacket like this, but the belt was replaced with a studded belt like for your pants... so if you want a studded belt for your jacket you could try it... i dont know just thinking a loud
where the fuck do you buy these damn jackets?? i look in all the thrift stors and cant find any.. the only place i could think of is the internet.. but i dont have a credit card.. and plus it would look new and things that are new suck cus they arent broken in.
@Jamestheboob it means like when yer boots or somethin are new, how tuff and stiff they are, but later they get softend up and broken in so they ain't stiff and new anymore.
@NickTheWarior they are pretty much 80s motorcycle jackets man you can still buy them new but they cost like 100 bucks and other than new you can only really find them in thrift stores, i on the other hand had mine handed down to me.
@NickTheWarior -buy a card at walmart/kmart/gas tastation that you can put money in. then get an acct on ebay. they got lots of motorcycle jackets on ebay.
we know it doesn't but we still have the freedom to wear what we want. it is diy aslong as you do it your self everyone takes ideas from everyone else. IT's how the world works.
@punkinglad13 you can turn the sleeves inside out. it will be weird but you can fit your arm through and hold on to the stud and use the pliers. Thats what i did anyway. Goodluck!
Would it be alright to stud something that isn't heavy material? I was gonna do a DIY project with a BDU jacket but I don't know if it will hold studs and patches appropriately.
I'm about to stud my first leather jacket, but I've heard if you stud through the lining on the inside the jacket won't hang on me right -- did you have any problems like this?
Nah, I had no problem...but jus make sure you don't bind it up I spose. I sewed a patch like that, looked good on the outside, but the lining was all jacked, so I had to do it over.
I like how you respond to all comments, i got different studs and they are really hard to bend the legs out, and i ended up puttting ridiculous holes in my jacket :( which is also a really old jacket but yeah help?
on mine i did basicly the same but i made a casualties patch and put it whare u have yer anti social one, then in the center i made a big adicts one and put it in there then studed all the extra space
I made a cool hat out of a green quilted hunters cap once I made every other square brown,added a racoon tail to the back and I had found used cement nail strips from a construction site and afixed them running down the center. I added a SUBHUMANS patch and drawn chaos symbol on it. I would ride my bike around wearing it until I took it off one day and never seen it again.I have to make another one and show everyone.
One thing you could do that i did to mine, at least until school started, is sew on some bullet belts. I took the tips out of mine so it would be to heavy.
I put spikes on the shoulder part of mine. You might want to get creative with some paint markers. They're fun to use and it can add some individual touches to it.
I used Stencils, just google Stencil Punks, there's a really good site for stencils. you can also make your own if you know. takes practice though. Be careful of over spray. I never actually tried or thought of paint markers though think i will.
HEY carefull with the lock on your zipper man, thats exactly how mine got ripped off, i was sitting on one of those benches loaded with holes, and it went in and twisted, i got up in a hurry and it just snapped right off, im still trying to find a way to fix it cause i lost the little plastic part it grips on too
The way everyone studs there jacket is different from mine//I use my fingers to bend the studs but I never curl bend them//They've been staying on pretty good though//My Jacket is saturated in them too//My jacket constantly sheds spikes though//
Constantly sheds them? The studs I use would be real hard to bend the prongs on with my fingers...maybe thas why yers fall off...you could use a key or almost anything to bend them prongs in well.
Hmmm, I like your jacket and I was thinking about the blank space on the back. Why not put your HedgeTV logo guy you do at the end of your video, on a patch (big one) and then stud it onto your jacket? Would be kewl.
I saw a guy with a leather jacket and I thought it was cool, but then I saw a guy with a leather vest and I knew it was gay.
So, what makes a leather jacket so cool compared to the leather vest. Sleeves. So what I should do is just go around with leather sleeves. Then I would be super cool.
you procrastinating more then me??? or you are using the excuse you want it perfect... because I know you do not do everything perfect... I have watched a few of your films to know that...
about time you posted a new one... =P Jacket looks good... if you really want spikes you can do some on the sleeves... either going down or around the cuffs... but I like how you put one of the patches you made on it.
looks good. not a big fan of the cone studs, and yeah, you do have a big gap in the back. wh ydont you put a anarchy symbol in acrylic on the back? or, you could slap on one of those studs and spikes stickers.
I dig the cone studs, cuz they go right along with my spikes...I'm gonna put somethin on the back, but I don't know what yet...I got some ideas, but I don't want to tell anyone.
i like it really nice looken and i agree u should do somethin to the rest of the back so it doint look so bear just got done studding my denim jacket my self
is it possible to Sew patches on?
TheWoWBane 1 year ago
@TheWoWBane Yeh, but I sew it by hand cuz the leather's kinda tuff.
HedgeTV 1 year ago
@TheWoWBane Yea id use dental floss cuz its more durable than regular thread!!
SparkyBTMP 1 year ago
What brand is yout jacket
TheLurksSuck 1 year ago
@TheLurksSuck Uh, says Royal Leather.
HedgeTV 1 year ago
my jacket has no collar so it pretty sucks is there a way to make collars for it
ZackAllenLadd 1 year ago
it looks so ridicilously stupid hahaha :D:D
blingblingchecka 1 year ago
will you send me some of those cone studs? hahahahahha. plz?
rrrickster69 1 year ago
A while ago i say a leather jacket like this, but the belt was replaced with a studded belt like for your pants... so if you want a studded belt for your jacket you could try it... i dont know just thinking a loud
MCRsTheBlackParade 1 year ago
where the fuck do you buy these damn jackets?? i look in all the thrift stors and cant find any.. the only place i could think of is the internet.. but i dont have a credit card.. and plus it would look new and things that are new suck cus they arent broken in.
NickTheWarior 2 years ago 3
Try army navy stores...but new ain't so bad. I mean this one was new when I got it. Jus break it in.
HedgeTV 2 years ago
thanks.. ill look for one
NickTheWarior 2 years ago
@HedgeTV what does 'broken in' mean?
Jamestheboob 1 year ago
@Jamestheboob it means like when yer boots or somethin are new, how tuff and stiff they are, but later they get softend up and broken in so they ain't stiff and new anymore.
HedgeTV 1 year ago
@NickTheWarior they are pretty much 80s motorcycle jackets man you can still buy them new but they cost like 100 bucks and other than new you can only really find them in thrift stores, i on the other hand had mine handed down to me.
wolfeman323232 1 year ago
@NickTheWarior if you go to austin texas sometime check around there sometime there everywhere
Xzone256 1 year ago
@NickTheWarior Try a biker store.
jjnevarez93 1 year ago
@NickTheWarior Hell if i know. I got mine for 40$ from a yardsale down the street
noobishdumbberry 1 year ago
@NickTheWarior -buy a card at walmart/kmart/gas tastation that you can put money in. then get an acct on ebay. they got lots of motorcycle jackets on ebay.
1Skorpia 4 months ago
is it possible to sow the patch or is it to hard because of the leather?
evilnegi 2 years ago
Its tuff, but not impossible, I sewed patches on this one by hand.
HedgeTV 2 years ago
its best to use a sewing machine. but you have to get a special type of needle cuz rugular ones cant handle leather usually.
PrinceDotPoison 1 year ago
why dont you stupid people just be creative and find your own way to do it. DIY. studded leather jackets dont make you a punk
XocXhcX 2 years ago 2
we know it doesn't but we still have the freedom to wear what we want. it is diy aslong as you do it your self everyone takes ideas from everyone else. IT's how the world works.
punkinglad13 2 years ago
how do i studd the arms of my jacket? i can't fit plyers in there
punkinglad13 2 years ago
Man, I don't even know...gonna be tough.
HedgeTV 2 years ago
oh dude try turning the jacket inside out
metallhedz 2 years ago
@punkinglad13 just stick a board in through the sleeve and bend the prongs of the stud on the board
krunckperson 1 year ago
@punkinglad13 you can turn the sleeves inside out. it will be weird but you can fit your arm through and hold on to the stud and use the pliers. Thats what i did anyway. Goodluck!
The13thflower 1 year ago
I like your video, thank you for making it, I hope you can show more of your creative skill to us! You rock!
no1sexybrasileira 2 years ago
I studded some gloves, and they fell out ALL the time
lol did I do something wrong?
rockonsara 2 years ago
Would it be alright to stud something that isn't heavy material? I was gonna do a DIY project with a BDU jacket but I don't know if it will hold studs and patches appropriately.
lynusluver 2 years ago 2
Patches are no problem on BDUs, obviously...studs hold on pretty well, but will loosen up before too long if yer not careful.
HedgeTV 2 years ago
Would it help to put cardboard under the studs?
lynusluver 2 years ago 2
Yeh, but it'll probly fall apart...better to use somethin like plastic.
HedgeTV 2 years ago
I'm about to stud my first leather jacket, but I've heard if you stud through the lining on the inside the jacket won't hang on me right -- did you have any problems like this?
m00nki11er 2 years ago 2
Nah, I had no problem...but jus make sure you don't bind it up I spose. I sewed a patch like that, looked good on the outside, but the lining was all jacked, so I had to do it over.
HedgeTV 2 years ago
Have you had this problem-
When i use my pliers to bend the prongs it breaks the prongs off? Anyhelp of how to prevent that?
UnicornFlavors 2 years ago 2
No, I never had that happen...but try usin a screwdriver or somethin to jus push the prongs into place.
HedgeTV 2 years ago
Is the Anti Social patch DIY or can I get it somewhere?
symbolboy44a 2 years ago 2
Nah, I made it.
HedgeTV 2 years ago
where did you get ur jacket?????
karinakatistofic 2 years ago 3
Army Navy Store on OSU campus.
HedgeTV 2 years ago
When you go to put a stud in, do you put two holes in for each prong on the stud? And then bend them the other side?
MultiGamerGuy 2 years ago 2
I jus put one hole per prong, an bend it over onto the leather.
HedgeTV 2 years ago
im selling my jacket :(
i need money but i put over 1000 studs on it, its the shit
oioioi09 2 years ago 3
how much what size is it and can i see a pic of it
punklover99 2 years ago
try using the end of fingernail clippers, worked well for me
apock00 2 years ago
yeah but if you have cone studs pliers help
punklover99 2 years ago
I like how you respond to all comments, i got different studs and they are really hard to bend the legs out, and i ended up puttting ridiculous holes in my jacket :( which is also a really old jacket but yeah help?
Segadoway 2 years ago 2
Uh, well, I'd use needle nosed pliers or somethin to bend them.
HedgeTV 2 years ago
Tried, and failed
Segadoway 2 years ago 2
you help
the belt ripped off of my jacket, do you think I should bother trying to put it back on?
BobTheNecrophiliac 2 years ago 2
I would...I use it a lot.
HedgeTV 2 years ago
when its gone it doesnt look quite the same.
t0xickid777 2 years ago 3
Yeh, that too.
HedgeTV 2 years ago
nice vid
im about 2 stud my vest and both ur vids helped
dasanb 2 years ago 2
Hey, cool.
HedgeTV 2 years ago
wicked dude!
on mine i did basicly the same but i made a casualties patch and put it whare u have yer anti social one, then in the center i made a big adicts one and put it in there then studed all the extra space
punkrckr3 3 years ago
Hey, cool. Thanx for watchin!
HedgeTV 3 years ago
man i got me a lether jack like that too, studded an patchd up, but its huge on me man.. i look funny when i wear it.
razorsk8s 3 years ago 2
Yeah you've done a good job,it lukz kool,very punk rock.
BLAKEYBBLAKEY 3 years ago 2
Hey, thanx.
HedgeTV 3 years ago
were can i find Heavy Metal designs on leather jacketses
mexicore2007 3 years ago 2
I don't know...sorry...maybe do it yerself.
HedgeTV 3 years ago
I made a cool hat out of a green quilted hunters cap once I made every other square brown,added a racoon tail to the back and I had found used cement nail strips from a construction site and afixed them running down the center. I added a SUBHUMANS patch and drawn chaos symbol on it. I would ride my bike around wearing it until I took it off one day and never seen it again.I have to make another one and show everyone.
Korious1 3 years ago
One thing you could do that i did to mine, at least until school started, is sew on some bullet belts. I took the tips out of mine so it would be to heavy.
Polishbojo 3 years ago 2
That's cool, I jus never really got into the bullets thing.
HedgeTV 3 years ago
kick ass i always wondered how someone would go about doing that
punklover99 3 years ago
I put spikes on the shoulder part of mine. You might want to get creative with some paint markers. They're fun to use and it can add some individual touches to it.
RandyTheRebel 3 years ago
Yeh, I got the paint...just don't know what I wanna do yet!
HedgeTV 3 years ago
How do u paint a leather jacket can u give me some tips
jokerkid14 3 years ago
I'd use paint markers if it was me...real easy to use.
HedgeTV 3 years ago
I used Stencils, just google Stencil Punks, there's a really good site for stencils. you can also make your own if you know. takes practice though. Be careful of over spray. I never actually tried or thought of paint markers though think i will.
Polishbojo 3 years ago
Yeh, I think spraypaint is really good for big designs an stuff, but for writing, paint markers might be better.
HedgeTV 3 years ago
HEY carefull with the lock on your zipper man, thats exactly how mine got ripped off, i was sitting on one of those benches loaded with holes, and it went in and twisted, i got up in a hurry and it just snapped right off, im still trying to find a way to fix it cause i lost the little plastic part it grips on too
RebelYouthPUNK 3 years ago 2
Hmm, that sucks.
HedgeTV 3 years ago
The way everyone studs there jacket is different from mine//I use my fingers to bend the studs but I never curl bend them//They've been staying on pretty good though//My Jacket is saturated in them too//My jacket constantly sheds spikes though//
iLLShit4Real 3 years ago
Constantly sheds them? The studs I use would be real hard to bend the prongs on with my fingers...maybe thas why yers fall off...you could use a key or almost anything to bend them prongs in well.
HedgeTV 3 years ago
I'm going to go back and curl my studs...anyways Hedge keep up the vids man...I dig them a lot
iLLShit4Real 3 years ago
Cool, thanx for watchin!
HedgeTV 3 years ago
can i use pvc instead of leather? my friend told me it won't look as nice as leather.
phoenix0225 3 years ago
I think PVC would be fine...Redhotcustoms made a jacket like this outa vinyl, an it looks great.
HedgeTV 3 years ago
A PUNK'S JACKET IS HIS ARMOR!!!
monkeydbz12 3 years ago 11
Sure can be.
HedgeTV 3 years ago
i like your jacket because is not overloaded by studs or spikes like many jackets ive seen
vergolapio 3 years ago
Yeh, I dig the studs...but only so much. Thanx for watchin, an for the comments!
HedgeTV 3 years ago
my jacket is studded from top to bottom
it took alot of hark work
neverwasapunk16 4 years ago
Yeh, I bet it did.
HedgeTV 4 years ago
it would look awesome with a dead kennedys symbol on the back
ledzeppelin1rocks 4 years ago
Yeh, I dig Dead Kennedys...but I don't think I'm ready to advertise for em.
HedgeTV 4 years ago
again jacket rocks mine is more like the jackets the ramones would wear it has less studs but still pretty cool
ledzeppelin1rocks 4 years ago 2
Yeh, that's how I kept mine for the longest time...but it's been morphin.
HedgeTV 4 years ago
how time consuming is studding a jacket? im about on get started on mine this weekend
pissoutmyasss 4 years ago
Well, it depends on what you got to do...of course...this job took me like an hour and a half or somethin.
HedgeTV 4 years ago
im shooting for alot of studs probebly most of the back
pissoutmyasss 4 years ago
The back is tough...but shouldn't take you too long, once you know where they're all goin.
HedgeTV 4 years ago
very good work on the jacket
leatherdude24 4 years ago 2
Thanx again...it's a work in progress.
HedgeTV 4 years ago
Awesome leather jacket!
Anonym9999 4 years ago
Hey, thanx.
HedgeTV 4 years ago
i know your up to this but make a studd pattern like the dischagre stud pattern on one of there records
docwaffenburger 4 years ago
Thats one of the ugliest and played out studded patterns ever, Imo.
ArmedHogs 4 years ago 2
I like how your style is very 77ish.
ArmedHogs 4 years ago
Thanx, I'm kinda old skool.
HedgeTV 4 years ago
Maybe you should just get a big back-patch and stud that on to and do some kind of stud pattern around it
Discharge109 4 years ago
Actually, I'm considering somthing like that...but I might make the patch too.
HedgeTV 4 years ago
Hmmm, I like your jacket and I was thinking about the blank space on the back. Why not put your HedgeTV logo guy you do at the end of your video, on a patch (big one) and then stud it onto your jacket? Would be kewl.
Ebbiesmom 4 years ago
Yeh, I considered somethin like that...got too many ideas, really...thanx for the input.
HedgeTV 4 years ago
suggest you make a video about like painting the jacket
etclulzjohn 4 years ago
Yeh, I've been hearing a lot of that...guess that'll be coming up soon.
HedgeTV 4 years ago
i was thinking of that too. hey, this would be a good chance for you to put something onto your back.
redhotcustoms 4 years ago
Yeh, we'll see...I'm sorta reluctant to paint it.
HedgeTV 4 years ago
why? do you think youre gonna screw up? if so, practice on some scrap pieces of leather first.
redhotcustoms 4 years ago
Naw, it's cuz it's so permenant.
HedgeTV 4 years ago
good point. youre gonna wanna put something you really like on it cause you cant get it off. hopefully youll come up with something.
redhotcustoms 4 years ago
I saw a guy with a leather jacket and I thought it was cool, but then I saw a guy with a leather vest and I knew it was gay.
So, what makes a leather jacket so cool compared to the leather vest. Sleeves. So what I should do is just go around with leather sleeves. Then I would be super cool.
I thought I would give you a laugh...
GothGirlGG 4 years ago
Man, leather sleeves with jus shoulder straps would be kewl.
HedgeTV 4 years ago
I will steal yours... lol... then you would have a gay vest...LOL
Have you thought about buying some pens to write on the leather?
GothGirlGG 4 years ago
I got a white paint pen...just haven't used it yet.
HedgeTV 4 years ago
you procrastinating more then me??? or you are using the excuse you want it perfect... because I know you do not do everything perfect... I have watched a few of your films to know that...
GothGirlGG 4 years ago
I don't know what to paint.
HedgeTV 4 years ago
paint a rabbit... I like rabbits... you can make it a stitched rabbit.
GothGirlGG 4 years ago
Rabbit? Maybe.
HedgeTV 4 years ago
Rabbits are my favorite... you can take stitch from my Myspace and make him on yours... or not...
GothGirlGG 4 years ago
Haa! This was a funny conversation!
HedgeTV 2 years ago
about time you posted a new one... =P Jacket looks good... if you really want spikes you can do some on the sleeves... either going down or around the cuffs... but I like how you put one of the patches you made on it.
GG
GothGirlGG 4 years ago
I gots spikes aroun the cuffs...an on the apulets.
HedgeTV 4 years ago
wow that's a great looking jacket!!! I want it! keep up good work!
Ich1hasse 4 years ago
Kewl, thanx...I mean, except for wanting my jacket.
HedgeTV 4 years ago
looks good. not a big fan of the cone studs, and yeah, you do have a big gap in the back. wh ydont you put a anarchy symbol in acrylic on the back? or, you could slap on one of those studs and spikes stickers.
redhotcustoms 4 years ago
I dig the cone studs, cuz they go right along with my spikes...I'm gonna put somethin on the back, but I don't know what yet...I got some ideas, but I don't want to tell anyone.
HedgeTV 4 years ago
cant wait to see what you put. keep posting up videos.
redhotcustoms 4 years ago
No prob.
HedgeTV 4 years ago
ooh i like the ani-social sign lol!
ElFuzzyFilms 4 years ago
I figured that would be a good spot for it, cuz all these people stare at me after I already walked by.
HedgeTV 4 years ago
nice lol!
ElFuzzyFilms 4 years ago
i did quite a good job on mine, if u want, i could send u a link to see what i've done :P
alsonic 4 years ago
Yeh, definitely!
HedgeTV 4 years ago
i like it really nice looken and i agree u should do somethin to the rest of the back so it doint look so bear just got done studding my denim jacket my self
lusefer 4 years ago
Yeh, I'm gonna do somethin on it...jus don't know what yet.
HedgeTV 4 years ago
looks good! i guess you could do the same with leather belts eh, i should try that.
again, great vid, nice jacket!
onevs3 4 years ago
Yeh, you could use those on belts, wristbands, denim, wallets...dang near anything you can punch holes in.
HedgeTV 4 years ago
thats realli kl i thought about doin that to m jacket but prob mess up lol
thedarkness001 4 years ago
Naw, it's easy.
HedgeTV 4 years ago