Perfect Grade MSZ-006 Zeta Gundam Zガンダム 1/60 scale Part 1 of 3

[GTReplayMaster]

wishing for a PG Unicorn!

[negima47]

aahhh i want a zeta gundam model kit, it looks fun to build and the zeta has one of the best designs,

[Guyverman01]

3 people were Titans officers.

[Vegeta101691]

is this painted at all? (do you paint any of your kits?)

[Jman92854]

Now that I see how far the hand can bend back and forth, you could do like an "Oh mah gawd, no way" pose. Like the hand bent forward all the way, fingers out, and the arm up in a bend. xD Ah... what fun you can have with a PG.

[qwertzy121212]

how long did this take to put together?

[GNSquacker]

@2Old4Toys which PG is most worth it? I have PG 00 Raiser which is ok but after that? or should i stick to MG 2.0's??? please reply

[ZuttoAragi]

Iwant to get a pg, but the only ones I really want cost WAY too much.

[123tootsiegirl]

BRING ME THE HYGOGG

[donwaskito]

this is the video that start it all... the video that made me love all those gundam mokit... damn...

i held you responsible Mr toys!!! now gimme all of yer gunpla... hahah just kidding sir... thanks for this video though...

[xxLelouchxx67]

You just made my day...I was looking for a PG Zeta video and I found it! I was debating on either the Strike and Skygrasper or Zeta and after watching this, I just made my choice. xD

[FlareSaber]

ok I know this is a stupid question to ask but...how sold is a pg model. I have put together a few Hgs togehter and they are pretty sold so I just have to wonder how sold a Ph is. stupid question i know.

[crimsondragon18]

Ridiculous amount of detail i love it, now i cant wait for the pg 00 raiser.

[madrox84]

Thanks a lot for doing this. I wasn't sure exactly what to expect from a perfect grade, but now after watching this, I just reserved and will pick up my Zeta tomorrow. One quick question though, can you remove and attach the exterior armour without much effort or is it like once it's on, it's on for good. I have a 1/100 Heavy Arms Custom and there's not much to the insides and you can't really play with the exterior platings so I was curious. Thanks.

[2Old4Toys]

Not hard to remove the armour. I made these videos years after building and took the armour off to film. You know how they go together so you know how to take it all apart.

[Elios0000]

its a ton of work even if you know what your doing

id say my PG Zeta took a month or 2 to do right

you could do it in a week if you rushed but some thing like should be done right

[TonyAKABadtz]

im going to get soon, does this require any specific equipment, or can i build it right out of the box, with a screwdriver being the only necessity?

[2Old4Toys]

I consider some cutters and a hobby knife are essentials. see the start of my video titled "MG Gundam RX-78-2 v2.0 1/100 part1 (anatomy)"

[TonyAKABadtz]

THSNKS DUDE, im totally subscribing :)

[CaramellDancerElite]

Do u own all PG gundams

[2Old4Toys]

Yes I do.

[BikerTrashWolf]

How did I miss this till now!?!?

I have always said If I ever get a PG it will be this one.

[bryanz09]

is the knee joint of PG Z Gundam can only rotate at 90 degrees backwards?

[Xephon0930]

So is there a difference when it comes to the endoskeletal frame of Zeta and the RX 78? Cause the storylines say there is a huge difference on how the frame is made.

[CptSlow6]

the gundam mark II had what was called a moveable frame. instead of heavily armoring certain things attatched to the frame (such as thrusters etc.) those things were built into the frame to save weight and keep the suit as a whole from being too bulky.

it was sacrificing armor for mobility. which made sense because at the advent of beam weaponry, no matter how much armor a mobile suit had it was usually destroyed with one or two shots from such a weapon.

[Xephon0930]

So basically,frame-wise,the RX 78 was bulkier in armor?

[CptSlow6]

basically, yes. the rx-78 had much thicker armor. and was more difficult to repair.

the main reason the rx-78 seems indestructible in the original series is because most zeon mobile suits used only basic weapons. like machine guns. the rx-78 was made out of an at the time advanced armor that was very resistant to that.

like i said, when beam weapons were more widely used, the rx-78 was outdated. in the end the mark II was basically a testbed though.

[linkversion3]

hmm im kinda new hir are all PG Gundam have the endo skeleton body???

[dragonrazor123]

Sooooooooooo,do you need to build this?

[TheBleakReaper]

Yea

[rthdshtr]

hey this pg can transform without removing pieces?

[Basher86]

excluding shield?

[Alv135]

Do i need to buy batteries for the lights cause i have 1/60 but dont see the two watch size batteries in the manual?

[2Old4Toys]

Hi, it's been 9 years since I built this guy, I really not remember, but hopefully someone else who can remember will see your question and help you out regards those 2 watch size batteries and if they come with it as part of the kit or if you need to buy them yourself.

[xX20AxFreedomx]

They don't come with the Strike Freedom's.

Warning to all Lightning Edition owners.

The arm joints break.

FAST.

[cherrydiscount]

how much of this did you have to paint?

[2Old4Toys]

next to nothing

[myspacesucks666]

hay 2old4toys do you have the pg gp01?

[2Old4Toys]

yup... but that is a MASSIVE box and it scares me to even think about building it.

[myspacesucks666]

yeah ive got it, its was so fun to build it.

you havent build it yet but you have it?

[2Old4Toys]

I have all the PG's but only built the ones you've seen me post videos of. I've been keeping the un-built ones for a rainy day...

[myspacesucks666]

what? are you going to get the Gundam Astray Red Frame?

i think that they need to make a nu gundam pg but o well.

[UniBySalt]

Hmm, I think Freedom or Exia or Hi-Nu.

[myspacesucks666]

Hi-Nu would be sick.

[sshadow5001]

there so friggin expensive

[baghdadx]

how long took u to bulid it all??

[blarg1409]

how tall is this kit?

[Ballisticgoat]

when are you going to move up from these ole lamo pg's and get a 1/12? lol anyways i love these high quality videos that just show off the shear amount of detail. you just captured it all exceptionally well.

[gundamplus]

arrgh!!! I'm dyin to get this kit!! but I can't coz I don't have enough money!!!T_T

[lianbee]

Come to think about it, the are some diecast in Zeta PG, the screws. Waiting for my supplier to get this.

[Lakota25]

is there any die-cast in a PG cuz it looks like it has a lot of weight to it.

[2Old4Toys]

The die-cast in this one is just the landing gear actually!

[8thversion]

man i really gotta have a PG gundam..

[Fontoker66]

My Nu gundams perfect grade

[bladespawn420]

DUDE

[jcarter593]

with out the plates on the face it looks like a cat

[Astritos111]

That my friend is 1 awesome Gundam keep it up!!!!!

[3215121]

wow this makes me think if someone really likes PG they will be having a hard decision..

[2Old4Toys]

no stand

[Monkerr]

Im planning on Getting Exia 1/60 do I need a screw driver? or those are fake screws?

[staykey]

The Gundam Exia 1/60 isn't a perfect grade model so you wont be using any screws at all. 1/60 exia is equivalent work of a MG maybe less

[Monkerr]

so wont have a skeleton?

[2Old4Toys]

I can't say if there are any screws in the Exia. I'll let you know if I get this one in future though.

[TheNetworkZ]

So if I get a Pg I have to screw in every everything? o_o

[2Old4Toys]

Yah

[TheNetworkZ]

I'm planning on buying one on Saturday, are there a lot of pieces to screw in and is it hard?

[GreyFox2000]

hey is this exoskeleton just like the perfect grade wing zero? wanna get one and just finished building the pg wing zero.

[2Old4Toys]

The Zeta's endoskeleton is pretty much as you see him here. Wing Zero is way skinny in comparison.

[GreyFox2000]

is it easier to wire? is it like the strike gundam and just has a little light box that inserts into the head.really thinking about getting this one next.

[2Old4Toys]

Zeta head light is self contained, unlike the WingZero.

[GreyFox2000]

is it easy to pose, does it have a stand?

if not do you know of a place that has one?

[MaxInterjects]

ah this is quite the PG. i have the MG Zeta Gundam 2.0... also a great kit

[verven222]

wait is the exoskeleton built or does it need some assembling?

[2Old4Toys]

All PG endoskeleton require building entirely!

[7702jy]

how long it take u? it took me 3 weeks, painting everthing

[2Old4Toys]

Can you make a vid and show us!

[SavageSwed]

very nice!

I have just built my first model. A HG Providence from SEED, and I love it, its a great feeling when it is completed ^^

[omack141]

how long does a pg grade take to Build??

[Markuskhan]

Well, I built mine over a period of a few weeks,I know new slow record right? I did one limb at a time, taking about 1 hour each not trying to make a chore out of it or make it any way bothersome, but boy I love it.

[omack141]

did you paint your mg??

[Markuskhan]

Yeah, I went over all my parts with a coat of paint, mostly the same color as the parts but it really makes it stand out more and gives it a much less plastic look.

[2Old4Toys]

Pls make a video and show us!

[pedroviski2]

PG are really amazing *_*

[Pastyauzy]

I have just purchased this model and it is awsome. I'm having trouble building it. I can't get the screws all the way in. About half way they get harder to turn. I start stripping the screws. I don't want to ruin the model. Please help me! Any advice is welcomed and thanked.

[2Old4Toys]

Ouch!You double check you using the correct screws?

[Pastyauzy]

I Finally found a correct size screw driver and fixed those screws. I was wondering does the model come with the CR1220 battery in the head unit? I thought the box said it came with the batteries.

[fragclone]

nice models. im deffinetly getting one XD the only prob is that you have to build the whole thing

[weavernutz22]

this ones my fav, longest to build with very little space. however i think i messed up on the right wing, cuz the green light doesnt shine that well on it

[Hepathos]

Man, they could easly build the real robots based on these toys.

[UnderYourMercy]

actually japan, is starting this one thing called "Towards the realization of gundam" where they're researching on building real gundams and ever since WW2, japan wasn't allowed to build a human army due to the treaty they signed. But it didn't say they can't build an Army of robots!!

[crapmunky99]

I heard that a certain japanese electronics company has recently created a "mini-nuclear generator" for powering things like apartment buildings and such. If they were able to make them portable, it might be able to power things like "mobile suits". If you remember, in the first episode of Gundam (0079), it's noted that the Zakus were powered by nuclear generators. Hmmm...

[fragclone]

lol nice loop hole

[zedjabug]

yes iw asa ble to watch this!!!!