Scusi ma non ho di tempo ora, forse un po dopo. Senti, senzza db killer e pazzo non devi pensare, compralo. E migliore scarico per z750 ance il Leo vince e otimo... Akrapovic e' molto pegio...
Hey Bokikawa - Got mine fitted as planned on 5th July. I'm very pleased to have chosen this one. Good looks and sound - and road legal..! If you still have your Z, may I suggest a tail tidy to get rid of all that plastic hanging at the back end..!
You unscrew the bolts and pull off the cables from the exhaust, than take of the plastic which hides the valve motor, it is on the left side of the bike a black plastic next to the seat, (but be careful don't brake the plastic) than you just pull the cables off with the pincers buy loosing the cables from the other side, and that is it
. Than you just have to place the arrow and screw 3 bolts and your good to go.I didn't tune the machine after, and I think I've gained tork in all ranges but they say if you do remapping you could gain a horsepower o two!
There is a small weld peace which connects silencer with the can, you have to break it for good, after you can pull out the safety ring with sharp pincers, than you just take out the silencer and forget about it:-) The cables you have to detach completely from the bike it is much easier if you take off the stock can and than take off the cover for cables which is on the exhaust.
Thanks for your reply bokikawa. This looks like the one that I'll get for my Z. Can you please confirm your video shows the db killer fitted - it sounds just right. I believe that to remove it there is a circlip that holds it in. Can you tell me what you do with the noise emission cables that ran from the standard pipe to the servo? Do Arrow supply a blanking plate for the servo? Finally, did you need to make any engine adjustments with the Arrow fitted - or just fit and GO!!?? Thanks again.
UE and Singapore road approved. It can be converted in to racing for track use only.
And from experience I can tell you that it is really loud, lots of bas, much better than Akrapovic it has no pause in low revolutions like with Akrap.! Silencer easy to take off!
sembra un seggiolone quel porta targa O.o
matteomejo 1 year ago
Not my first choice,but a very nice looking/sounding exhaust for that bike.
reconstrucdead1 1 year ago
nel mio c'e' il db killer . . . ma . . . . . .
erixfly1982 1 year ago
cavagli il db killer...ho lo stesso scarico anche io e fa' un sound pauroso....
lucaboschetti1985 2 years ago
Scusi ma non ho di tempo ora, forse un po dopo. Senti, senzza db killer e pazzo non devi pensare, compralo. E migliore scarico per z750 ance il Leo vince e otimo... Akrapovic e' molto pegio...
bokikawa 2 years ago
I gusti sono diversi!!! a me non piace portatarga. Scarico costava 500 euro
bokikawa 2 years ago
nel video è con db killer?? per favore posta altri video! visto che sono interessato allo scarico !
stefanoba19 2 years ago
400 euro di scarico e non spendi 30 euro per un portatarga ahahahah
Alex41pilot 2 years ago 3
mamma che sound mi potresti dire che modello di arrow si tratta?
TRIO87 2 years ago
è il tromboncino arrow con fondello in carbonio ce l'ho uguale
antani2210 2 years ago
devo prenderlo anche io.. perde tanto ai bassi? e il rumore agli alti come è?
stefanoba19 2 years ago
Hi.. Whats from a Arrow Exhaust is this
luctsad 2 years ago
Hi.. Whats from a Arrow Exhaust is this
luctsad 2 years ago
Hi.. Whats from a Arrow Exhaust is this
luctsad 2 years ago
Hop to see you smiling!
bokikawa 3 years ago
Hey Bokikawa - Got mine fitted as planned on 5th July. I'm very pleased to have chosen this one. Good looks and sound - and road legal..! If you still have your Z, may I suggest a tail tidy to get rid of all that plastic hanging at the back end..!
zedseven50 3 years ago
You unscrew the bolts and pull off the cables from the exhaust, than take of the plastic which hides the valve motor, it is on the left side of the bike a black plastic next to the seat, (but be careful don't brake the plastic) than you just pull the cables off with the pincers buy loosing the cables from the other side, and that is it
bokikawa 3 years ago
Thanks bokikawa. My pipe Arrow has been ordered today and will be fitted on first service 5th July. Will let you know what I think after.
zedseven50 3 years ago
. Than you just have to place the arrow and screw 3 bolts and your good to go.I didn't tune the machine after, and I think I've gained tork in all ranges but they say if you do remapping you could gain a horsepower o two!
bokikawa 3 years ago
There is a small weld peace which connects silencer with the can, you have to break it for good, after you can pull out the safety ring with sharp pincers, than you just take out the silencer and forget about it:-) The cables you have to detach completely from the bike it is much easier if you take off the stock can and than take off the cover for cables which is on the exhaust.
bokikawa 3 years ago
Thanks for your reply bokikawa. This looks like the one that I'll get for my Z. Can you please confirm your video shows the db killer fitted - it sounds just right. I believe that to remove it there is a circlip that holds it in. Can you tell me what you do with the noise emission cables that ran from the standard pipe to the servo? Do Arrow supply a blanking plate for the servo? Finally, did you need to make any engine adjustments with the Arrow fitted - or just fit and GO!!?? Thanks again.
zedseven50 3 years ago
Nichrom / carby road approved silencer
UE and Singapore road approved. It can be converted in to racing for track use only.
And from experience I can tell you that it is really loud, lots of bas, much better than Akrapovic it has no pause in low revolutions like with Akrap.! Silencer easy to take off!
bokikawa 3 years ago
What model and part number is that exhaust? Is it the pro racing one?
zedseven50 3 years ago
great sound
LublinStreetRebels 3 years ago