Beautiful woman forging hot iron

[vernsonhorshoeing]

wasting to much energy tapping the heel of the anvil after blows, & why on earth would anybody work on the heel of the anvil while drawing steel,

[oldstock1607]

What's up with all the metal working tools in that kitchen?

[unamonu]

Tare frate, felicitari. E o munca grea si din pacate prea putin apreciata. Mult noroc in continuare.

[X0verXDriveX]

Boobs and iron is all I need...

[pipus4444]

Romanian kitchen?

=P

i know it was a easy one...

[paloarteinc]

my grandpa was a blacksmith, then a woodworker. i always loved the blacksmith work, seems real fun. but woodwork is cleaner :)

cheers,

jake

[lyndon2472]

lol its sooooo true women have no rythem

[dikmo35]

are those 2 'blank' taps a teaching method for control and not over doing it?

[mjr350]

@dikmo35 Its called cadence. Its not supposed to be so direct. You just let the hammer bounce a few times while you think about your next move. Also saves the arm because it wears out quick if your trying to start and stop the hammer every few seconds. You hear the correct way at 3:03 when the guy makes them few little taps as he turns the bar. Its faint but you get the picture.

[EddySweat832]

Where is the "Beautiful Woman"? I watched six minutes waiting for her to appear.

[warriorofsteel01]

OH LAWDY I NEED TO FIND A LADY LIKE THIS!

[ishouldplayzelda]

cool beans

[ExposeChosunNinja]

What is she forging? An iron Egyptian Crook?

[sheep1ewe]

I worked wit two beautiful woman in my former work (with blacksmithing), they where both even better than me... Don´t think it appends on what between ones legs to hawe what it takes. (well said by me, not sure if i count as woman as well..., but if it was, certanly not a beauty one... :D )

[firedathan]

man i dont care how hot it can get in the summer if your in a shop ware steel toes. If you cant take the heat get the fuck out.

[81gorillas]

Great video, would have been better with tits, but still great video.

[orangeiceice12]

fuck you guys sandals are awesome you just have to be zen and careful

smoking weed helps with this

[svberry]

why do they tap the anvil two tomes and the strike the metal twice?

[wepntech]

@svberry i believe it's to make the anvil resonate and avoid it sticking to the piece ther working on

[hexusziggurat]

be above the main body of the anvil!!!! wear eye protection ...pants and good steel toed boots. In 9 years of professional smithing i've had 3 close misses where glasses did save me from injury....2 were from me working and the third from an apprentice wire wheel brushing something 15 feet away.

I can understand the off strokes if its leading up to a striking technique, but typically she's putting too much into that wasted motion otherwise.

[ProspectHillForge]

Intentionally missing with half the blows, not actually swinging the hammer, and working out on the heel of the anvil...

Yeah, I have some issues with the teaching.

[jameswoodsupersport]

elbows in!

[xxxxsimone]

the woman has no feel........... as with all woman trying to make things by hand....

[offenwrong]

to all you people with thumbs down..were is your vid?...she is doing better than my first attempt.

[polylingue]

Where is the beautiful woman?

[ahz123]

haha at 0:56 she's getting the hang of it.

[RgSideeeeeeeeee]

In soviet russia, iron forges you D:

[coelhoteixeira]

Go home wash your kitchen.

[ironmanforge]

somebody needs to tell her beating on the anvil instead of the steel is a waste of time and energy, notice hoow shee hits the steel twice then the anvil twice. The man I served under would have chased me from the shop for that foolishness.

[scarekrow9]

@ironmanforge she's just doing what the guy showed her

[mjr350]

@ironmanforge So he never taught you cadence? Glad I didn't learn under him.

[ironmanforge]

@mjr350 no he taught me to move steel under the hammer. something i still do every day. And you probably couldnt have learned anything from him. There are times you hit to the side as you move the steel to keep the "cadence" going but, steel once anvil twice is foolish. Antway, what the hell does it matter to you?

[mjr350]

@ironmanforge Its only my career and passion.

My first ever task as an apprentice was to turn a 25 x 12 bar down to 10mm round and then back to 20 x 10. Jumping it up as I go along. That's moving steel. Lucky for me I'd been bashing on the anvil with dad since I could hold a hammer so it came naturally. Felt sorry for the other green kids

But then again, what would I know.

Might wan't to read my comment to dikmo35 below so you know where I'm coming from with the cadence.

[ironmanforge]

@mjr350 whatever you say.... you proved your point feel honored all better now/

[althesmith]

@ironmanforge : The only time I ever smack the hammer against the anvil is while I'm repositioning a bar, just to give my right hand something to do. The "strike work, strike anvil", afaik, is something that looked good in a movie sometime.

[justgetmegoin]

way to go .. keep up the good work . practice makes perfict..

[waterzoip]

hot woman forging beautiful iron

[maxinpains]

That's a one way to fake sexal harrasment/...lol

[ZEEMADMAN]

I can only wonder how She's going to look with an Eye Patch. Clear safety glasses aren't that expensive so there's no excuse for not wearing them. You only get one pair of eyes per customer! Teach Her to say Arrrrrrrrrrr now! Rrrrrrrrrrrr!

[Hollrobb]

Did i miss the "Beautiful woman "? or was this video titled wrong?

[reyshakquit]

@Hollrobb uuuuuu

[mike4ty4]

Too much skin bared here. The FORGE SHOP is NOT the place for BARE SKIN.

[robakyo2]

I think these guys are trying to discourage her from succeeding at blacksmithing. I've never seen such horrible instruction. Double tapping the anvil, no safety equipment, and most of all, incorrect grip on the handle. I bet her whole arm was in pain for several days after that pathetic lesson. Way to go guys! I doubt that she'll be back anytime soon. I'm sure they had a good laugh.

[xXcagllariXx]

I'm fourteen and I just got into the craft about a year ago. I think I'm pretty good, and people tell me I am. I make knives. I think it's a great art, it's fun, and a great way to meet people.

[DanJeffery07]

whats with hitting the anvil?

[Conan568]

Lady, you don't forge on the weakest spot on the anvil.

You could break a heel. ;-)

It's great to see Girl's getting into our craft, Kid's too.

The more the merrier I say.

[4950jwk]

bitch needs surgery

[BlacksmithBroadcast]

how many pounds is that anvil?

[philip21786]

She can forge my hot iron anytime! :)

[Yorzaxt]

No eye protection for her pretty eyes and no foot protection to be seen. If you could see how my work boots look and I ask you if you want to have your foot look like that. Also one piece of fire scale in her eye and she will be blinded. At 1500 degrees, it will boil her eye fluid and make it explode.

[ivansnyder]

lol love the way they go without eye protection... All it takes is one hellohot piece of hot metal in your eye and whabam your in some righteous pain .... And sandals... bad idea...

[anvildancer]

This vidio has some redeeming qualities, but the anvil tapping thing is just stupid. Girl if you watch this video, don't do that. Not sure if you noticed or not , but your instructor does not do that when he swings the hammer. Waste of energy, time and heat.

[RayAir1]

Did you throw her the hammer to?

[zonianinexile]

Did he do any "tapping" later on?

[j822bosh]

She is hot, though my wife is prettier. These guys with sandals kill me! Are we going back to the Roman empire? Safety GEAR! Those grinders are ANNOYING! I have one and I can't stand the noise! Ear and eye protection!

[jamierodg]

we tap to take a rest and let the hammer bounce back up. it takes less energy than just stopping the hammer and starting it again. Yes there is a rhythm but you don't see anyone doing that with a power hammer because it doesn't get tired.

[trio2633]

No eye protection, shorts and sandles, are they trying to hurt someone? they have started out totaly wrong. She is nice looking though

[ActaSanctorum]

@trio2633 don't forget ear protection too

[bakersneza86]

it s ok;;;;;; no pain no gain

[raiun42]

Don't tap the anvil between blows, it waste time and energy and it puts dits in the anvil face.

Start em out with modeling clay, to show them they are shaping not just beating.

For gods sakes put safety glasses on You only have two eyes.

[TechnicusJoe]

you tap the anvil to keep rythem, in this case its a bit useless but you got to learn it somehow. and if your anvil gets dits because of hitting it there are several possible problems: or you hammer is too hard or your anvil is too soft or bad quality or you're hitting the anvil in a wrong way for example

[brokenherz]

leave it in woman forging iron???

[don44264]

From what I saw...she taught herself some basic techniques. Who are the geniuses wearing sandles in a blacksmith shop? Before the forge was even fired up. you should have taught her how to hold the hammer and then how to swing the hammer. Another really cool trick is to hammer on HOT steel.

[brianrosado]

hey, the adjectives in the title of this video are interchangeable!!! : "Beautiful woman forging hot iron"

or "Hot woman forging beautiful iron"

either way it works.....LOL

[gagamax01]

She is learning and i think she is doing quite well ! why did u have to give such a small rate ? have you been better 1st time when you worked with your hammer ?

[fastmoob]

@gagamax01 the low rating is from pervs who wanted to see a model in a bikini.....pree damn close though. shes beautiful. also its nice to see the profession being passed on.

[davidthe1]

@gagamax01 im sure that not even 10% of the haters ever used a hammer.. just kids infront of the keyboard xD

[heettreet]

@davidthe1 yes ,,, but maybe only 1% ,,,i've worked with steel a bit in my life and respect what she is doing

[davidthe1]

@heettreet

yeah :) im not pointing at you, i meen all the haters around youtube

[merkur075]

@gagamax01

I can say yes. My Dad told my how to youse a hammer, when i was 7. And i think i was better than her. This girl is adult and i think she would learn faster than a little boy.

She is a poor girl, who dont understand (or dont want to understand) !