tmansgokarts ( Kids Push Kart #6 )

[LonelyKidInHisRoom]

Tman, I am having trouble with my go-kart. I've got it all set-up however, the chain moves very slowly when not attached and not at all when attached to the sprocket.

[Tmansgokarts]

@LonelyKidInHisRoom thats strange , get a video up of whats going on. Its hard to know whats going on.

[LonelyKidInHisRoom]

@Tmansgokarts I actually ended up going back out and figuring out I just didn't tighten the hex screws tight enough. Thanks tho, I'm gonna have all mechanical videos up on my other page, RamseyColeRacing.

[Crazieboy86]

Nice

[ClonePerformance]

Hey T-Man, if you haven't already finished the push handle how about a cross pipe between the two and cover with pipe insulation foam... By connecting the two it will be stronger and covering it will be safer...

[dopeybear420]

that add was in kinda a weird spot

[Tmansgokarts]

@dopeybear420 ha, I know.

[gregory543210]

.wmv is also a larger file than an .mp4

[gregory543210]

try safari web browser for uploading your vids

[TorqueRanger]

PLEASE MAKE SURE TO CLEAN THE CREOSOTE OUT OF THE EXHAUST PIPE BECAUSE SOME WOOD BURNS DIRTY AND CREATES MORE CREOSOTE AND MORE RISK FOR A FIRE... SO PLEASE BE CAREFUL...

[froggyman222]

like the cart the kids are gonna have alot of fun on it

[handcuff308]

i had an idea idk if you want to do this, but what if you made it with a motor and you stood on the back and controlled the gas and brake but the kids steered the cart? that might be kinda fun.

[handcuff308]

very nice Tman! can't wait to see it when its done!

[KiddsockTV]

TRy using tubemogul com. First you upload to tubemogul, then you can deliver to other site. This helped me get around youtube upload issues too.

[mowerpro144]

I got a Honda clone and I need to change oil. What waight 5w or 10w?

[Tmansgokarts]

@mowerpro144 SAE 30

[WMFirefighter09]

I've had the same trouble at blip. I never figured it out, I finally left the site, I don't have time for a program that only works when it wants to. It's bad enough my youtube vids take 3 to 4 hrs already to upload, but they finally load. Hope it works out for you. Take care brother, great vid !!

[newsmonkyjosh]

That little push kart is awesome!!

[Tmansgokarts]

@newsmonkyjosh thanks, I think the kids will like it

[chuckccfd9]

cool stuff Tman looking good

[Tmansgokarts]

@chuckccfd9 thanks chuck, how are things on your end, ? snow melting , mud everywhere ?

[1darron1]

i really like the seat

[RedneckMachines]

@ monboy7 its because hes partnered i think

[TheGocartman]

What about breaks

[Tmansgokarts]

@TheGocartman nope no brakes.

[bcrawdad1]

coming out nice! but im sure you will probably put a motor on it one day! hahahaha

[monboy10]

whats up with the add 7 min into the vid?

[Tmansgokarts]

@monboy10 something new thats comming out ... dont you love change

[mustie1]

stick a couple a door knobs on the uprights,

[donyboy73]

if you can get some oak or maple you will get a lot of btu'

[Tmansgokarts]

@donyboy73 yep, the apple that I used was nice, it even made the shop smell good.

[Bunkers101]

Locust is the best to burn, aslong as its dry and dead, Dry dead maple burns hot and quick aswell.

[ShawnCFarm]

I wish I had the time to put a wood stove in my small shop, then I could make more videos of the tank tracked lawnmower

[Tmansgokarts]

@ShawnCFarm build a stove and do videos of it.

[turtle2448thomas]

for the handles use bike handle bar grips

[brandongeiger2]

Hey T-Man! Put some tennis balls on the top of the push bars thatll work good ill bet

[4wheelerdude100]

@Tmansgokarts for the push handles you could use chair leg caps



[danbbb]

I have a 440cc snowmobile that I'm looking to build into some form of off-road go-kart. I'm hoping if I watch enough of your videos I'll work up the motivation to get started. =)

[Fearlessfront]

I ONLY use google chrome as a browser. maybe try that for blip

And hey, thanks! The wood stove is awesome, we had 75* in there the other day. we had to open a window... haha.

I'm used to burning lots of wood, we used it as a main heat source growing up. I just need to get myself a nice chain saw and splitting maul, because I have a few elm trees that have been dead for a while. nice and dry!

Oh and the kart looks good too, can you just fit some bicycle hand grips on the upright push bars?

[Tmansgokarts]

@Fearlessfront ya I thought about that but that steel is 1/2 inch

[Fearlessfront]

@Tmansgokarts I think a lot of kids bikes have a smaller diameter handle bar, but that might be 5/8"...

[rajans13]

Hi

[Tmansgokarts]

@rajans13 hello, thanks for posting. so what do you think on this push kart that I'm building ?

[rajans13]

@Tmansgokarts I think you doing a very good job and that looks like a cool thing your doing for your children when i was 6 me and my dad made a gokart we used a 49 cc engine and a old fridge cart and as the steering he made he put the drive shaft right on to the tire so it was friction driven it was cool but now im 15 i bought my own Lincoln electric welder and i am working on a pocket bike hope to get a vid out of it if you got any suggestions let meknow btw i like the vids cheers

[mrbarking1]

i would have put a engine on that push kart

[Tmansgokarts]

@mrbarking1 I Have some of those planed ... and they'll be cool

[Bunkers101]

@mrbarking1 It's a PUSH Kart, lol

[FINDaCHANNEL]

them handles to should bend them back wards and curve inwards and have a bar going across a bit like a handle on a pram then 2 kids could push it and they well have more grip.

but may be hard to bend them as there on the cart now i suppose you could get a blow torch and heat the steel and then bend.

don't have to do that idea lol just a suggestion

[YOURREALBALLA]

try google chrome??

[Tmansgokarts]

@YOURREALBALLA ok, I'l try that

[XXziomeqXX]

Leave that intro! I love it! And the music is great! Who's with me?

[Tmansgokarts]

@XXziomeqXX I like it also but I have to keep mixxing up my videos so they dont get to boring

[FINDaCHANNEL]

@Tmansgokarts i dont get bored of em

[ronaldhotboy]

@Tmansgokarts boring?.......Thats impossible, you can talk about dog dung and you'll find a way to make it interesting lol

[NWCC08]

Wood pallets work really good because there mostly made of hardwood lumber.

[Tmansgokarts]

@NWCC08 I thought they were mostly pine