Get To Know Your ATV / Motorcycle Carburetor Pt. 1

[iMSoHigh420ritenow]

thanks 4 teaching me about my bike!

[fyxfranky]

make a video on how to put the side metals back to the carb

[thanksimdeadnow]

Dude great video, i somewhat mechanically inclined, but i just got my first ATV ever, never ever worked on any bike, and i needed to clean the carb. You start from the basics and explain the principles/theory behind that carb actually works, which is identical to mine, now im sure i can clean mine on my own. Thanks bud, i needed this video!! ya and that stink your smokin smells goood, i cant get work on stuff without it either haha

[joeybuffdaddy]

high and working yeah! haha

i have this problem with my mini 80cc fourwheeler, and everytime i go to open it full throttle it dies, unless i put my hand over the intake valve hold it then let it go then it goes fast then etc... keep going to ride, so will clearing the float out help this or am i drowning the engine in gas or something???

[jc3604sho]

my three wheeler has been parked for 3 yrs. since i got an atv but i decided to restore it and rebuild it but when i got to clean the carb the throtle cable was stuck with the screw on cap on the top of the carb like in 1:55 the cap come off but the spring and the needle are stuck inside they are still atached to the cap but it wont budge please help!!!!

[jc3604sho]

Please help when i took the trottle cable top off the carburetor it was stuck and i cant get it out also the thumb trottle is locked what do i do????????

[TheAgentofKarma]

0:30 Awesome!

[1904pulido]

GREAT INFO MATE HELPED!

[alexmc09]

haha you said cock at 1:00

[curtismundy]

nice, smoke weed, and work on motors lol

[ScrewYouImGoingHome0]

Install a Fuel filter in the fuel line and your jets wont get obstructed so often

[dukes20084]

I just got mine to running after 2 yrs of it sitting me and my friends were riding it and adjusting the carb so it will idel and when we were done and were just sitting on it talk i happen to notice it leaking gas throught tube to drain the float and out the back of carb were the air fliter was wat could be wrong with it?

[shadowdropmanagement]

where does the vacuum hose connect?

[pnell6000]

puff...puff pass! lol

[ElKuate530]

hey my quad dosent want to start, it just sounds like in wants to but it just cant get that last spark or something. I already change the spark plug but nothing and i took it to some guy to fix it and he said he was going to clean the carb and it worked afew times then like 5 times of use later it does the same thing sounds like it wants to start but dosent.If you could help me out i would appreciate it.

[xhumeka]

Thanks so much for this great video! I'm about to clean the carb on my '86 250sx and this has been a HUGE help. The problem with my ATC is that it's VERY hard to start cold, and no amount of choke helps. The only way I can get it started is with NO choke, and a good 30 seconds of cranking before it will start to catch. Any idea what could cause this problem starting? I have a new (properly gapped) spark plug and my airbox/filter is clean. Thanks!

[mastermexicano]

es de una atc 185 honda 1982 yo tengo una igual a esa en perfectas condiciones

[MooseBaker]

Very helpful. I think I need to clean my atv carb, it leaks after I shut it off. It runs good and strong though.

[vgmaster20]

I looked around for quite a while for a good, yet simple enough, explanation of how to clean a standard carb, but couldn't find something that would do. Your videos were a great help. Thanks!

[Gattlin83]

5:26 funny as hell, is that a step? I didn't hear em explain what to do.

[textiles1]

Thanks for this, I knew nothing about this and my dad said we need to clean the carburetor because it has been sitting for a while, I got to watch this video a couple times though.

[droid740]

5:28, go ahead and light your pipe...

[countryboyG]

my brother has a yamaha beartracker and he has been complaining that it has a hard time going up hills and when you put it full throttle nothing happens and it feels like the throttle dont open the hole way what should i do? i cleaned the carb and changed the spark plug and adjusted the valves and everything nothing changed what should i do?

[fireinthemountains]

@countryboyG - Check the spark plug. If its covered in carbon, the mixture is too rich so you need to drop the jet pin. If its burnt white then theres not enough fuel getting in and you need to raise the jet pin.

[countryboyG]

i know that i tired all the settings on the pin and i got it right now but now gas pores out I have to check the float

[popolot]

5: 26 lmao

[TheCarnac449]

What about 5:26?

[big92fs]

Looks like a floppy cock and a set of balls.

[bemi0604]

is that a three wheeler out side?

[jdshaq]

just use seafoam to clean everything lol

[pitbike2006]

hey im haveing trouble with my bike

i can get it to idle then after abot 4 seconds its starts to low down a little then it just stops after 6 seconds or so

any help?

thanks

[northeast13eric]

5:26 lol

[bgesell27]

good info but you need to pass the bowl homey, i heard you spark that shit before tearing the carb apart. lol

[MohadibTheHorrible]

:D  I got enough to share :D

[yourcodefendant420]

@bgesell27 I heard that shit too! LMFAO It's the only way to work on good ole recreational vehicles.

[MohadibTheHorrible]

well, if you got good spark, you got good gas in the carb.. Id make sure it was getting air, Id also might try some ether in the airbox. Maybe you have bad compression. Good luck.

[robalsager]

hey man, my pitbike doesnt kick up, at first i thought it was because the cylinder head was threaded and i couldnt get the spark plug in there but i tapped it out and put a new plug in, checked it for a spark and it sparks. still doesnt kick up. so i checked the carb, carb is fine, any ideas why it isnt kicking up??