Added: 1 year ago
From: mazda2284
Views: 7,902
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (83)

Sign In or Sign Up now to post a comment!
  • hey man i have a question. i have a logic 1400watt amp 4 channels with a sony explod 1200watt sub. i have it hooked up to channel one but idk if its at 4 ohms or 2. id like to run it at 2 ohms. the amp says 2 ohm stable but i dont have a owners maual for it so i was wondering how do i run the single sub at 2ohm? thanks

  • @g1andrhone im gonna guess your sub is a svc 4 ohm , just run it bridged on the front or back channels , you would get the most power that way

  • i wanna run 4 premier 12"s on 1500 @ 1ohm. right now im running 2 alpine type r d4 12s on 1500 and 2 crossfire db s4 12s on and alpine 400wrms. 140amp alt. 1000ca battery stinger sp1700 db. 1/0 from batts and to 1500watt sundown audio amp and 4guage on the 400 watt amp.

  • love the port design kmk and is that abk playin?

  • Just dont hit the brakes too hard, otherwise no competition will accept it!

  • Those suck

  • @yungeddakid in that case so do you . !

  • should I change the mofos out for two of those?

  • Those premiers are the shit though!

  • @Ethan420Cox thanks man !!! did you see it with all 8 in it ?

  • @mazda2284 No man I didnt even know you had 8 in it damn! I need to check that shit out haha and i just realized i was talking to you earlier on facebook! fuckin badass man i didnt know this was you

  • @Ethan420Cox hell yeah ! wish i had more time to sit n chat on there lol !!!

  • Why did you get rid of the boss just curious?! they are not very good haha

  • is it more watt and how much did the profile cost u oh and go check out my vids

  • @1computerhelp yeah i have videos with the subs and those amps, and now have 8 12's in here , profile went out of biz . so i dunno where you can even find 1

  • i dont now what did you say at the end?

  • what is the max power

  • @1computerhelp of the amp ? its a profile AP2000 2000watts max , 960 rms bridged , 480x2 RMS at 2 ohm 2 ch. i have premier amps in it now

  • how many watts is your amp

  • @1computerhelp 960 rms also check out my newer videos 

  • nice soud but crap car

  • @tiiiinha call it crap if you want but i put over 100,000 miles on this thing myself without replacing anything other than the axle's , ive owned this car for 9 years now and still get the job done... idc what anyone says i love my car.

  • ever tried cleaning da ashtray

  • dang dude not trying to talk shit but with all that money in subs i would of bought a nicer car but thats just me

  • clean ur car

  • @sk8freak51392 NO . if your so damn worried bout it you come clean my car for the 300+ videos i have of it alone......

  • that AP2000 will not push even two of those subs youll need something that can handle a .5-1 ohm and that 4 gauge is gonna need to be upgrade along with alt and maybe 2 batteries for a 4k rms system but that wall looks beautiful 4get what ppl have to say about your car and the eq you have hey if you like it thats all that matters

  • @JayMoungMUSIK lol got 1/0 ga wire now and 2 insane premier amps !!

  • i have four of these in a 07 monte and cant push them so ima sell them

  • @playboydaking225 ill buy em !! sendin pm

  • ur 6x9 r the papper cone ones ahah when they fuck did they sell thos garbage

    ur car is worth 250 at that scarp yard do ur self the favor

  • shit is minnor

  • @EaStxVaNxiNc im removing your comments cuz your just way out of line...

  • @EaStxVaNxiNc and again you are wrong. they are not another company, they are only a different build house. ive owned pioneer premier for over 10 years... every model Premier has a pioneer model build exactly the same , only difference is where they are built. show me a web site with only premier subwoofers that have nothing to do with pioneer... its not there cuz you dunno what your talkin bout.

  • @mazda2284 i owened premiers even longer then that 10 yrs is a joke yes premier came with impp they dont make premier in mexico or some bullshit and make pioneer in china they cut premier the fuck out and pioneer make the pro comp series subs if u no what im talkin about i owened impp premier 1st ones ever made have a video up on my page from one of my old subs premier was the magnet voice coil and impp cone its was a diffrent build ovbly but same fuckin place ahaha

  • @EaStxVaNxiNc dude your on crack lol .

  • @EaStxVaNxiNc go ask pioneer they will tell you what im telling you , premier is part of pioneer , and who cares if i dont over power my subs.... your the only one bitchin.

  • @mazda2284 way outa line ask pioneer ur self and they will tell u

    why they arnt maken premier sub n e more junkie

  • @EaStxVaNxiNc ya now they call it stage 4 lol . go ask em. ya they dont make premier anymore .. cuz they closed down their most Mexico plant , i talk to the local pioneer rep. all the time lol. these premiers are better SPL drivers than the champion pros , and the new 3500max subs...

  • @mazda2284 remove the comments u noo deep down in side the truth

  • @EaStxVaNxiNc no your spouting a bunch of wrong misleading information, premier is made by pioneer''not their own company as you said'' and was made in mexico, in 2009 pioneer decided to shut down the Mexico plant to save on cost , and they don not make premier anymore , now they make a new ''premier'' line called stage 4 , including a headunit much like the premier PRS 880 and new speakers based of the premier REV. these are facts.

  • @mazda2284 stage 4 is there new line yes of mother fuckin speakers u dumb fuckin idiot there component speakers not OVER 8" woofers they are door speakers ahaha clown stop shoping on craigslist buy somthing new then tell me facts not some bullshit ur reading 

  • @mazda2284 and headunit nothing to doo with subs give ur sell another hoot junkie and keep dreaming

  • @EaStxVaNxiNc why ? it dont hot at all. and at 4 ohm i only get 320RMS per channel instead of 480 rms... lol , only hooking up 2 dont make any sense to me whatsoever lol.

  • @EaStxVaNxiNc lol , Premier is pioneers own brand...lol , the difference between pioneer and pioneer premier is that Premier is made in mexico and normal pioneer is made in china !

  • Awesome vid

    whats the song name at 7:50 ?

  • 40 percent is the average YOU are supposed to go by to know how much electrical to need for ur car. YOU should know that. Lol. But yeah u can run that with stock alt and burn that up along with ur batteries. So good luck jump starting u car again and again ect ect ect.. Just do it right dude. Its all fuckin bootleg and u talkin like its nice. It looks like garbage and im sure if the camera could pick it up, it would sound lile it to

  • Im sayin tho u have a less than thousand watt amp on 4 1000w subs...thats not adding up to a good combo bro. Actually what is the rms rating on those subs??? 1000w right? So if thats the case then yeah ur car isnt powdring them for shit. A cars stock electrical isnt made to handle a powerful aftermarket amp amd subs, thus h/o alts and batteries need to be added.I have a 2200w system and have a 3000w battery and 200A alt.U gotta have it to push the full amount of amperege to ur subs.where u from

  • @MrSuicideSPL im from wisconsin... and yes it takes power to make power and yes they are only getting 1/4 power they can take... nothing wrong with that for now till i have money to dump into it. and shit this is all getting ripped out and ima do 8 12's...lmao .... jesseatkins187 powers his 6000gti ..or his RF4000d on a stock atl. he just has a bank of battery... and not all cars use 40% of the alt... you should know that. some use 80 some use 10 ..... depends on whats in the car for electrical

  • Ok dude i watched ur video... Yeah first ur way way way way underpowering those subs thats why ur not really flexing ur panels. Cause u have no soind deadener on ur roof or doors and panels are just thin sheet metal especially on those old mazdas. U would be moving more air with like a 1000w single 18 in a 5-6.5 cubic foot box. And ur running 4 gauge, with no electrical upgrades?? U need to get some real 1/0 gauge from like knukonceptz bro. Even if ur amp doesnt accept it, run it from ur alt a

  • @MrSuicideSPL 3 runs of big 4 ga. to the rear into a block , and 1 short 4 ga. to the amp cuz it only accepts 4 ga. wire. , also i have the big 3 done in all larger 4 ga. wire , not cheap wire either... my buddy has 2 ga. wire and my cores on my 4ga are larger than his 2 ga wire ! ....my car uses hardly any power at all so the alt. only has to worrie about the system. come sit in this car and tell me it aint loud lmao.

  • damn man!!!!!!!! 

  • @switchgears32 thanks !!! :)

  • should of just put JB weld on your window seam LOL would have yo use alot put would of held

  • @jesseadkins187 the liquid nails was close to jb weld , and i have it thick as hell lol ! but next windshield ima try plexy i think , soon gonna have 8 12's :)

  • @mazda2284 what you gonna redo that box or what?

  • @jesseadkins187 for sure :) i got way bigger plans , and another build car ima start

  • why dont you have 2 or 1 more battery then it should push ur subs if you have all thoose things on 1 battery the powers gonna drain quick!

  • ur should meter it and tell me how many dbs you get

  • Woop woop! Hell yeah Mazda a bass vid and Boondox. You should hit one of his shows last one I went to was crazy. Love the vids keep em' coming. 5 stars for the system.

    MMFCL

  • @joshpasstheaxe they just played here but i had to work :(

  • i gotta get a demo of this

  • @driftdude947 hell ya man !!! anytime

  • would u say 2 mtx ts55 are worh the money and how loud thay can get and if thay have good sq too thanks man keep this shit going cant wait to see more amps on that shit get it realy pounding like crazy

  • @dragonsage2008 i have video of them , my buddy runs 2 12's they are ok.. they have good SQ in a sealed box but not in a ported, they are alot louder ported though, i also have a friend with 3 10's and he has had issues with them blowing and he has a 800 rms mtx mono. i can tell ya that my friend new premier 10's hit hard as hell , and they take plenty of power.

  • @mazda2284 ok thanks man iv been looking at them mtx tss or some champion pros seening as thay only need like .8 to to 1 cu ft box lol im haveing a hard time desiding what subs i want to up grade to and i want to make sure i get something il be happy with and with so many out there its hard to deside what ones to get lmao but thanks man at lest now i now to compleatly stay away from mtx and probly stick to the kickers alpines or pioneer and hifonics like iv been looking at lol

  • have you ever had a termlab in it?

  • @goatskindreams not for years.....

  • @mazda2284 It was my comment on the last vid about it looking like 2 boxes if you remember :P

  • I only say woofer ear sex because spl "fucks" your ear holes haha

  • True, ever considered cahngable or adjustable ports? That would be sweet, oh and props on the liquid nails heavy duty, I used 6 tubes on my box, it works similar (but not as good) to fiberglass resin for way way way less. I need to matt my roof and that's my next project, less flex = more woofer ear sex

  • @reiningern777 rite lol ! if anything flexs i try and make it stop , just not much i can do about the damn windshield ... it just wont stay in lol !woofer ear sex !!! whoop whoop !

  • 50hz is good for spl and music, I designed mine off of 49hz because I don't jam to low hz music, mostly rock but I can still hurt someones ears whoever wants a demo. When I first saw your video I was confused as to why you had the port design blocking air velocity... It does hurt numbers but when your pioneers are "maxed" out I don't think that will matter much in a small car like that!! Have you been metered yet? TL?

  • @reiningern777 no havent had it metered yet, i think i wanna just buy a TL but then i have to buy a laptop to ... lol so i dunno . if i do get a full 4000 RMS ima have it so i can wire them up and run less power for everyday but have em so i can quick wire them down if i need to kill someone with a 60hz tone blast lol , also the port designs would have to come out if i got that much power. cuz other wise they will get broke anyhow lol !

  • i just smiled when you played boondox :) thx mate

  • @driftdude947 lol no problem !

  • Comment removed

  • Comment removed

  • why so high of a tune? id aim for the gut ripping lows! screw the numbers haha

  • @walkingfreak na i like alot of rock so my personal taste is a higher tune anyhow.

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more