4 RE SE 10"s in a silverado

[tok4life420]

so sick lol. people ever hit em with their feet while in back seat? not that ud wanna feel the excursion hittin ya but grills might solve that problem. ill setup man

[sittnphat5]

Those fuckers are hoppin man! Is the bass deep enough with the 10 s???

[joebro82]

@sittnphat5 Tey drop below 20 hz with ease. Power and proper box helps. Sounds like a helicopter hovering over your head.

[kadalvin2011]

what song is this

[inter264]

song????????????



[OlCountryBoy297]

i have a truck like yours. you think i could fit 2 15" kicker l7s under the seat? i know i would have to raise it. what do you think?

[joebro82]

@OlCountryBoy297 Yes you can. Just can really front fave them. Point them up or down and port towards the drivers side like mine was.

[Cwhink83]

i heard reS suck is their any truth to that?

[joebro82]

@Cwhink83 Watch the vid along with the tons of db drag wins and get back to me. I am going to say no, they don't suck. A little research will get you the answer though. They are no longer amerian made but they are the same.

[irvinbullet]

@joebro82 they used to be good, when they were made in the usa, now they are chinese, not saying that the re mt, re xxx, or the re mx are bad, its just the entry level that lost quality

[DJGREADY]

@Cwhink83 Well when they were bought out by USamps in i think 2007 they lost there lead designer and they went down hill a little bit i wouldnt say they suck there still better the most mainstream brands imo. I have 2 re se-x 10's on a hifonics brz1200d seeing 2 ohms about 900 watts(There a little under powered but take it just fine no clipping) And they slap like a mother fucker, put my friends Rockfords t1's to shame.

[joebro82]

@mrRunteldat1 I had a 96 extra cab that I did a blowthrough in. Had 4 12"jl w6v2's. You can remove the back seat and make your box and have a seat made for the top. You might be able to make a bracket and attach the stock seat to the top of the box. Just gotta get creative.

[bikeiswhatido]

nice butt massage

[mrRunteldat1]

What year is this truck

[joebro82]

@mrRunteldat1 this was an 01. but the rear seats are the same till the new new body style.

[mrRunteldat1]

@joebro82 Hey thanks for the reply. Reason 4 asking is cause i got 1 RE SEX 10D4 in a sealed front facing enclosure in a '94 C1500 ext.cab. Been trying to figure how to get more air space. I like ur set up im probably going to use the same method. Have u seen or know of any other way(other than taking out the back seat) to get more air space in these trucks?

[GMCownsall]

uhh dont people kick your subs when theyre sitting in the back seat?

[YoungRal10]

damn i need something like this, two 10s just wont cut it for me anymore....

[TommyDelVillar]

HEY awesome job, well designed box

[Trx450rallday]

ITS LIKE A FUCKIN EARTH QUAKE INSIDE THAT TRUCK SON!!!!

[jrantman]

yo put some matt tracks on your truck and roll down the street and they might think its a tank rolling down the street.........

[tuki1boo]

Nice man, I was thinking about putting four tens inside of my Ford F 450 king Ranch. this is a great idea to put it under the seats.

[yunggBrikk94]

what year is this truck

[Lilchrisrc95]

Does anyone knoe where to get a seat raiser kit for a 2011 silverado?

[327bigblock]

Bad ass system. Where did you get it and what amp is on it

[joebro82]

@327bigblock Red the description up above. Will tell you everything and more.

[HONDA250R920]

@joebro82 i am tryin to find a disign for my truck and like yours so wat is the box dimension

[carlos71486]

how much do those subs go for ?......and how many watts are they ?...nice system

[joebro82]

@asdparker1 I would shy away from pyle. I would go with re or sundown or brands like that. You get what you pay for. I sold this truck and only had this system in for like a month. Now I have a Ram Cummins and can only fit a tiny sealed box under the rear seat in the cubby holes. Went with 2 jl w0v2 10"s.

[pissonamynow]

bro, your system is bangin. i got the same truck...tyrin to put somethin like this in it...but moneys tight these days...good job bro!! i wanna see some more videos!!

[LiLHAM225]

I checked your build log. I don't understand is the bottom of the box wood or just fiberglass?

[BassHead143]

@LiLHAM225 fiberglass

[ajaybeats]

@supergreenhaze11 "Pay Per View" is the name of the song

[joebro82]

@HarleyRyeder instead of asking the same fucking questions that have been asked over and over how bout people read tge description and not waste my time. thats the point of a description. some of us have better things to do than spend 20 minutes holding peoples hands on box fabrication. and if my pic is of my "bf " im sure he would have no problem making you deapthroat your chrome pipes on your 1970's tech harley.

[joebro82]

@HarleyRyeder how bout you go fuck yourself. and odds are your harley is a sportster 883

[midwayer209]

Looks like it sounds good. Rap that box!

[HarleyRyeder]

Is that a pic of your boyfriend in your profile? lmfao

[HarleyRyeder]

In the time it takes you to reply "read the description. Thats why I put it there", you could of just answered the guys question.

Must be the way the "cool" You Tube guys do it.

[CxOxLxE]

i don't really understand box rise or impedance rise.. somebody want to explain it to me on one of my videos? thanks

[joebro82]

@CxOxLxE Best to look it up via google but most subs actually increase in impedance when pushed hard. The nominal impedance is when the sub is stationary. Most high SPL comp vehicles actually figure this into the build. That way wen the sub is actually moving they are getting the maximum power to net the highest output.

[supergreenhaze11]

whats the song?

[joebro82]

@supergreenhaze11 look at the description.

[hanishioak]

tottaly awesome

[luckey777s]

Wat I need*

[luckey777s]

Damn sir!! U hittin hard as a bitch! Thats eat I need haha 4real

[sage1ism]

whats the name of the song?

[Gera87M]

dammmmn this shit is bangin harder than 3 kicker l5s 12s

[Gera87M]

dammmmn this shit is bangin harder than 3 kicker l5s

[SaLCaLi831]

Where did u get ur box I been wanting 1 for my 2 12"s pls I wanna kno

[joebro82]

@SaLCaLi831 read description. Thats why I put it there.

[J0SE3O5]

good set up why dont take out the whole back seat and lift the box up

[joebro82]

@J0SE3O5 because I wanted a back seat. My truck before that I did a blowthrough to keep the back seat.

[ordinarycuber]

lol the seats...nice system btw

[ExpertOfSound]

you should have made the subs firing the other direction, so people don't kick them by accident or something... :)

Nice though, awesome flex!

[joebro82]

@ExpertOfSound No room to face them any other direction and get the airspace I wanted. As for the subs getting kicked I had aluminum rod I was going to use as grill guards. It looked much like the JL grills for the W7. Just never got that far before selling the truck and system.

[joebro82]

Theamp is over 2400 rms. With the impedance raise. But your rms power wont give you more x-max. Its in the subs design.

[miguelzepeda20]

dam homie .. haow many watts ... mine r 1000watts and thay dont do that

[joebro82]

@miguelzepeda20 I was pushing roughly 2450 RMS with impedance raise. The subs were wired to 2 ohms and with the raise it hit close to 4 ohms which oddly enough is the highest power on the JBL BPX 2200.1

[mardastar]

thks ima check it out...

[mardastar]

nice set up...ima have to use it lol...i got a 07 sliverado wanna use the re.s how did u lift ur set ..my installer says he can build the box wen i show him ur vid but i didnt no u had it lifted

[joebro82]

@mardastar

caraudio(dot)com/forums/car-au­dio-build-logs-cars-trucks-suv­s/461637-4-10-s-under-rear-sea­t-silverado-ext-cab.html

[joebro82]

@mardastar

Go here.

caraudio(dot)com/forums/car-au­dio-build-logs-cars-trucks-suv­s/461637-4-10-s-under-rear-sea­t-silverado-ext-cab.html

[Ba11esteros]

Very very bad

[AK9HO7]

Damn. Sick system bro

[3RiiCK903]

How did u builld ur box ?

i have a truck like dat and wanna make a box .

[joebro82]

@3RiiCK903 look at the build logs on caraudio(dot)com. It is on there.

[joebro82]

Never had it metered but it hit guite a bit louder than my Las truck that hit a 148.8 outlaw on tl. And a legal 143.3 on a tl. I don't tune my boxes for a meter. I. Go low.

[abervintageman42]

ever had this set up metered?

[cornholio187]

What Year Chevy This ? I Have A 92 And Wanna Build A Box For It

[joebro82]

@cornholio187 it is an 06 silverado 1500 extended cab.

[joebro82]

@cornholio187 it is an 01 2500 HD. You cant build a box like this for the OBS chevy trucks. I had a 96 that I did a blowthrough on and had 4 12"s in the bed of the truck firing into the cab. I won a DB drag even in the street max 3-4 cat.

[cornholio187]

@joebro82 ya thats what i seen people doing, and dont know if i wanna do all that work

[dplusb]

looks awesome where are the ports?

[joebro82]

@dplusb drivers side. 3 4" areo ports side firing.

[MrPellon13]

how did you lift the back seat

[joebro82]

@MrPellon13 2X4" steel tubing. Cut it and drilled holes and bolted the seat down.

[mrstone56]

Shitty part about it is if you have passengers in the back seat, they WILL eventually end up kicking your subs. Happened to my friend.

[joebro82]

@mrstone56 I had 3/16 aluminum rods to cover the speakers but never installed before selling the truck and system.

[boredezfuhhh]

What would be better 4 10's or 6 8's?

[34celticpride]

@boredezfuhhh 10's

[edweezy13]

how did you lift up the seat?

[joebro82]

@edweezy13 read the description 

[CESAR213]

whats the name of the song, it sounds sick ass fuck on those re's & they seem like they were putting in work.

[hokiesrule888]

Thats wicked man

[puregon]

hahahhahah, this is a comedy!

[claytonman20079]

very clever how you lifted your seat, nice setup up

[julioyperla]

nice !

[jakebball1112]

what is the name of this song?

[ReeseyPiecey34]

@jakebball1112 - That's one of Big Stackssss songs. He from CHATT TOWN, TN. YouTube the name.

[CESAR213]

@ReeseyPiecey34 what is the name of the song, i looked for it on his mix tapes but couldnt find it

[ReeseyPiecey34]

@CESAR213 - Big Stackssss - Pay-per-view

[xeniablue23]

can you pm me the dimensions of the box?

[joebro82]

@xeniablue23 Dont thave them, sold the box a couple weekends ago. Go on caraudio dot com and look up 4 10's under the seat silverado in the builds section and you can see the entire build.

[wheelus8]

can you post a link for the subs on craigslist.

[joebro82]

@wheelus8 I have a guy meeting me this weekend to buy the boxes.

[cregmonroe]

Im in north texas... Where you?

[joebro82]

@cregmonroe Amarillo. I have the box on craigslist right now. If your interested let me know. The lift comes with the box. Its a custom job and not super fancy buy you can powdercoat it or just take a rattle can to it and it will look perfect.

[cregmonroe]

Yeah the jls are about right for my taste don't think I could take much more lol. I really like your setup though wouldn't mind that box and subs in mine. What kind of amp you have? You ever see what it will hit at spl comp?

[joebro82]

@cregmonroe Never bothered metering this one but the JL's hit a 148.8 outlaw and a 143 in a db drag event. The RE's were quite a bit louder. I went with a JBL BPX2200.1 for the amp. I was getting around 2k before impedance raise. with the Impedance raise I was getting closer to 2500. I went with 2 ohms load then at 4 I saw more RMS power. Good for a mic. I sold the truck and the box is sitting in my garage unfinished. If you live anywhere near me I'll sell it for 150. The ports were 75.

[cregmonroe]

Hey I also have 4 10"s under the seat of my silverado (w6s)... I wanted to mount the amp where I can get to it a little easier though was wondering what you suggest?

[joebro82]

@cregmonroe I would just make the rear seat fold forward and mount it to the back wall and build a nice little amp rack.

I came from 4 12" w6v2's powered by 2 1000/1's and these RE's killed the W6 with just about the same SQ. I sold all the JL's off.

[xeniablue23]

hey man nice system. first off what year is your truck. I have a 2001 ext cab and am thinking about doing the same thing. Also if it is not too much of a hassle, can you send me the dimensions of your box? thanks.

[FlinstoneX]

I'm thinking of putting an amp into my extended cab. i see what youve done, but i dont think id be able to do that. Any idea where a good place to put the amp would be?

[joebro82]

@FlinstoneX Behind the rear bench seat. You can make an amprack or just mount the amp. Its on you.

[FlinstoneX]

@joebro82

thanks!

[863alldayy]

hey yo how the hell did u lift the seats?.. and is 10s like the nessacery size to put under your seat cause i was thinking more like 2 12 s but i like the idea of 4 10s, is it easy to lift the seats?

[joebro82]

@863alldayy I used 2x4 steel tubing. It works perfect and looked great. I would put these 10's against most 12's. I had 4 jl w6v2 12"s and these were quite a bit louder and punished you more. Harder impact. I had 2 12"s before downfired and they only needed a 2" lift. But they werent even in the same class.

[ACKAWILY]

Sick ass system my guy. I knew someone out there had to have done the xact idea (xcept I want 12s) I want to do.

[1hakunamatata7]

hey man im thinking about doiong something like this, because i wanted to keep my trunk how did this box work our for u ?

[blazinloud]

sounds very nice. you did have to fuck with the bolt downs for the seat or seatbelts??

im trying to figure out how to get a decent system in a extended cab, and thats definatly one way. im in an suv now so im used to lots of room. 5.2 cubes is a decent size to play with. my currect box is 5 gross and takes up my entire cargo area in my blazer.

[joebro82]

@blazinloud I had to lift the rear seat and the seatbelt shit too. I used 3/16th steel rectangular tubing. Went a total of 4 inches lift. Worked out nice for me. It was plenty loud and even with plenty of deadening people could hear me comin from a distance if your into that type of thing. I had an extenciom piece that went itno the space between the seat and the cab too. That added some more space. Something you might keep in mind.

[alienpowergt]

gotta love big stacksss, nice video

[BAGGEDEPIDEMIC]

name of song

[mmatsjugg]

that looks awesome

[crloslestat]

Sick sound system !! those woofers POUND big time ! but where did u buy that woofer box?? I fucked up big time by putting the huge woofer box on the back seat (2 12" AudioBahn) they sound great but I tortured the seat, I gotta get me a woofer box like urs. Im also impressed with those woofers......didnt know 10" would sound great. =D

[crloslestat]

Sick sound system !! those woofers POUND big time ! but where did u buy that woofer box?? I fucked up big time by putting the huge woofer box on the back seat (2 12" AudioBahn) they sound great but I tortured the seat, I gotta get me a woofer box like urs. Im also impressed with those woofers......didnt know 10" would sound great. =D

[joebro82]

@crloslestat I built the box, I sold this truck and pulled the system. So If you want to spend 150 for shipping and another 150 for the box let me know. If you want to do subs under the seat your gonna need to lift the seat and build or have one built.

[elpegiun]

Alrite thanks man. Good luck on ur system and keep doin wat u do best

[elpegiun]

Where can u get those amps? How did u make the box? Did u put passage ways for the air to find it's way out or seprate chambers?

[joebro82]

@elpegiun Go to caraudio(dot) com and look up my build. It is in the builds section. You will find all the info you need there.

[elpegiun]

Do u think 4 10 dc level 3 subs would work on the box u have. What type of amp would get those Subs to do what they do beat ?

[joebro82]

@elpegiun The same amp I have and the same box. If I started from scratch I would prob get a sundown sa-3000d or maybe even the 3500. Thats a bad ass amp and you cant beat the price. I might go with some DC Level 3's if I can sling these off for about 120 each.

[elpegiun]

Why would u choose dc and the level 3 ??

[joebro82]

@elpegiun The DC's are American made and they can handle twice the power if you have the power to throw at them, Way more x-max which is fun. They get louder and sound just as good as my subs do. Plus I like to do things not alot of people know about. I stay away from the best buy crap. lol.

[elpegiun]

Ok thanks for the advice man. Where can I get these dc subs and around how much are they?

[joebro82]

@elpegiun Go on the dcaudio website and email them. Rusty will get you what you need. If he sponsors you or usews you as a rep then you will get them for a really nice price.

[elpegiun]

Way would u think is better 4 10" re se audio like urs or 4 10" kicker Cvx

[joebro82]

@elpegiun RE hands down. Kicker sounds like ass. Those are the best kickers but they still suck. I would get something else like some DC level 3's if I were to do this build again though.

[elpegiun]

Clean install on the box. How did u lift ur seat and around wat db u hitting

[joebro82]

@elpegiun used 4"x2" steel tubing. Sut drilled holes bolted it in and did the same with the seatbelt brackets. And there ya go. lifted seat.

[joebro82]

@elpegiun and I havent had this truck metered but I would guess I am near the mid 140's based on this vs my last build that did low 140's. It is quite a bit louder but this also likes to play lower so the lows sound louder than they are. If I get into comps again I am gonna build an SPL box for this truck too. I shouldbe able to burp close to 150 if i am tuned right in the right box.

[oneloudchevy32]

Lookin good!! Do you have the measurements? How did you move the seat up? Thanks

[joebro82]

@oneloudchevy32 steel blocks. about 4" worth of lift. Some bolts and nuts and washers and a unibit. Too easy. Look on fullsizechevy(dot)com. in the audio video section.

[SPLBeast]

oh ok yeah thats good

[joebro82]

Yeah I wanted to recess the subs but the pors wouldnt allow me to get any deeper in the box so I just said screw it and double baffled. These grills will look like the JL grills but I will cover 2 subs instead of just 1. It should look pretty tight. I was gonna do 3 bars per side but I think 2 will look better. I need to get them bent using a brake line bender so they come out clean.

[SPLBeast]

arnt you afraid of feet or legs hitting the speakers?

and it looks pretty banngin man

[joebro82]

Actually I have some aluminum rods that I am gonna bend and make grills for these. I still have to do this but am aiting till I carpet the box.

[tmitchell6]

awesome

[bigstackssss]

yeah homie i see you!!!!!

[joebro82]

Yup. Shit slams in this truck. You get anything new you want me to put up here tearing my truck up just let me know.

[Bsktbll895]

Great to finally see the build come to life! Looks like it hits hard!

[bradlycriswell1990]

fuck yea, looks like it sounds good.

[bradlycriswell1990]

FIRST COMMENT W00T!

[bradlycriswell1990]

@bradlycriswell1990 Yea Im the shit.