500WHP TURBO D16

[Eagleye6688]

what tranny are you running, stock d series or have you converted a b series, if d series have you had to rebuild it or any mods to it to make it beter

[nikojdm21]

Damn good numbers

[turboturtle22]

dyno videos are hella borrrrrrrrrrrrrring.

[young4life89]

what stock parts you got on here im buildin a d16y8 block wit a z6 head n tryin to figure out what major parts i need to push atleast 300 let me kno thank you.

AWESOME VID MAKES ME JEALOUS

[WeHaveSteeze]

turbo setup and what engine mods??? thanks

[Brendon00000]

d16's can make any power on stock sleeves just not rods or pistons, I hope with mine I will eventually have 400whp someday, with cp pistons, eagle rods, colt cam and gt35r

[mrmarlon4u]

Ralph may tanong sana ko pwede koba ipalit yung 93' intake manifold sa 92' engine ko , honda coupe ....kasi nasira yung pedal or acceleration sensor ko from d16 92' engine ko , hirap ako makakita ng Throttle body assy sa engine ko, may nakita ko 93' d16 engine kaso magkaiba naman yung sensor sa ibabaw kaya di sya compatible , tanong ko pwede ba yung buong intake manifold ng 93' sa 92' engine ko? pansin ko mas malaki yung intake manifold ng 93' kaysa sa 92' eh .... pwde kaya .... Thanks Marlon,

[1Nycedickchippy]

Look up speed factory they ran 9.6 at 153 on a vitara build with stock sleeves.

[loooooodi]

it is automatic !!!!

only 4 gears

automatic civic r not made to be tuned!!

[dopesick187]

@loooooodi am i seriously the first person to put this guy in his place, wow. Guy you know shit about cars and tuning. When tuning to max rpms and best tune a/f ratios you hit your full pull in fourth gear, fifth gear is usually too lang and longer to rev limiter.i.e. 4th reads more power! And if you're too dense to understand what that means, ITS A MANUAL TRANSMISSION. You're welcome.

[DcEvoIX]

@dopesick187 yea usually 3rd or 4th gear pulls sometimes it depends on tires like when I had my camaro my tires were almost bald from drifting so they had to do 4th gear pulls and round up the numbers I think it was like 13whp under what I really had not to sure if it makes a difference from auto to manual but i'm sure it does cause of gear ratios and most of the older automatics were 3 gears and o/d instead of 5 or 6 and now 7 or 8 these new cars are crazy to many gears and less stick cars =(

[Mr240lover]

I Like Your Paint Job Man What's The Color Called?

[estar334]

what turbo are you using..? seems like it spools very fast specially for 4 cylinders

[ericascaliboy]

one point a t pibe! <--- my paborit fart ob dis b d o! lol Filipinos know how to do their shit! i'll be on my way there ralph!!! yabang pinoy!!! |>-|

[emill910]

sounds very choppy

[FBrito130486]

485HP listen to the guy say it

[mariego1980]

Nice :)

[5spd5thgen]

that car sounds so sick :D

[xionglee]

you make 500 whp on stock sleeve. What is your setup. what turbo you running and how much boost and more. I make 330 whp 260tq with 15 psi with go-autoworks race kit with bullseye r spec turbo .55 AR. on a dynomatic dyno. fully built with stock sleeve. Do you think I can make more whp on stock sleeve. How much more. I bet a 09 caramro ss and 08 dodge charger RT. Let me know. Thanks. I love you civic. 2 thumps up.

[Emeianoite]

@xionglee no way he makes 400+hp on stock sleeves.

[UnsurpassedKnowledge]

howmuch psi and what did u do for internals

[peatear01]

what kind of turbo was that? spool fast as fuck!

[Zkeyser86]

Ive been telling people for so long that d-series sleeves are pretty strong. No body believed me untill builds like yours came out!!! NICE

[joshnavalta]

i hear a filipino

[MDC33147]

damn! Nice!

[turbovanman]

Very cool, that turbo spools instantly.

[madnessknight2010]

nice sohc im going t upload my zc dohc dyno pull its only 450hp but its just as nice

[colombianpimp02]

damnnnn sick as fuckkkk

[cletedawgthewalmart]

single cammer slammer!!

[maxxx123x]

i love the sound

[alvarezpaul69]

fuck yeah 500 horse.. damn i love singles there the shit :))

[lyrikalxrebel]

hey did you get the sleves reinforced i wana know because im thinkin about going turbo on my z6 and do you know any company i can get my sleeves reinforced

[moonhead661]

damn! that sounds amazing. this just inspired me to throw a turbo on mine.

[ekturbo2]

what kind of hp #'s could i see on a fully built d-series with a big-ass turbo? and being street driven, is 600hp or more possible?

[tunerguy95]

holy junk that sounds strong

[TheDirtyPenny]

d series is much more cheaper than b and k series and it could smoke 2 series even its just sohc. thats why some people want a d-series than a k & b-series engine.

[illestva]

and Im happy with my D16y7

[IIDUVALII]

@TheDirtyPenny in the long your spending more money with a d series. going turbo isnt cheap at all.

[pinoycrx]

ohh bakit D16 ? pasakan nyo ng K series oh di kaya B series man lang ..

[redeye58]

go ls-v turbo u push more hp

[millertime60]

icing the intake is a pathetic way to squeeze more powerout of shitty engines

[bmwturbocivic]

right a 1.6L 4 banger making 500wph which probally still makes great mpg,. thats a peace of shit engine? grow up dude.... sweet d16,nice to see you had the balls to actually push 500whp on stock sleeves =)

[sonyfanboy17]

i agree, one of my mates is turboing his civic coupe VTI, And he has heard loads of shit about what the standard sleeves can actually handle. Some have said 400hp, some say 600hp. I think he is hoping for around 400Whp on his build on standard sleeves, who knows they could fuck up, but fingers crossed!

[bmwturbocivic]

Yea im currently bulding a z6 bottom end for boost with stock sleeves. going for 300whp at firt but could go up to 400whp in the future. good luck hopfully mine turns out golden too

[Pitchblac7]

fuck yeah dude, im thinkin about puttin a turbo on my D16y7 but im not even gonna be close to 27psi. but yeah, ballsy move. and it pays off.

[Timothayyy]

To make 500whp, you need a lot of fuel......

[BYCURE213]

ok and i suppose you can get that much one= your engine? at most they squeeze out 5-10 extra horse power, so its still a pretty nice build

[KAOTIKREACTION1]

First I gotta say....that SOHC is a beast....but I want to know what's with the bag by the Intake? lol

[b20eg6hatch]

Its a bag of ice to help cool the Intake Manifold during the runs.

[KAOTIKREACTION1]

Ahhhhhh smart move!

[Timothayyy]

Its probably a bag filled with ice to keep it cool.

[hondacivicacura]

sounds great man.

[h3avyduty84]

sohc cant make 500 hp. the most i see is 358hp.

[cool12291]

then you dont know the full potiential of sohc.

[thejeremiah]

He hit 503.46whp/345.30...just not in this video. It is indeed a 500+whp car.

[520wizard]

0.18 sounds like the car is taking off to the sky XD

[DaCoolestPersn]

sounds nice

[liquidated20]

Why is there a grocery bag covering the intake manifold? Did you go shopping before the dyno test? Amazing setup!

[panoulis20]

no he installed his intake manifold while still in the bag,i bet the receipt is stuck somewhere beetween injectors 1 and 2,,

[cool12291]

LOL nice 1

[gforjake]

ill bet money that thats a bag of ice

[sr20tuner]

if you guys are not being sarcastic, then he probably has ice in that plastic bag.

[yota73]

I saw 400 something wheel horsepower on that screen shot but it was way too blurry to make out.  Still very damn impressive.

[ralph1600cc]

Thats right. thats not the 500 pass. :) 490something. hehe good observation!

[yota73]

Yeah it almost looked like 498 or something. That must be a wicked ride. My buddy has a d16y8 putting 278whp down and that feels fast, I could only imagine what 500+ would be like. Great job on that car man.

[GeaserakaErik]

honestly feels slower

[7chinaman7]

your cars slow as fuck, u fuckin captain crunch eatin fuck face, bitch. you cant even see what the screen says, u homo

[senser1080]

Filipinos are the mexicans of asia.

[nikkiesmokey]

lmao thats funny!

[ralph1600cc]

what do you mean by that. lol.

[ewawi04]

@ralph1600cc that your badass ;D

[SuperFilipino96]

@ralph1600cc haha wow im not the only ralph thank god and its sooo true we filipinos are mexicans hispanics of asia were asian with mexican hispanic last names my last name is perfecto

[kylebucuk]

@senser1080

hahaha that made me laugh out loud

[Emeianoite]

@senser1080 LOL! that's fucking funny!

[hazzyXtheH1C0]

@senser1080 micronesians are,



[supra029]

hey im mexican an i bet i can beat you with my g35 coupe!

[assclone15]

anyone see that he still has A/C how cool is that i want a kit like that

[ralph1600cc]

i believe there are pics of the aircon lines in h-t thread. good luck

[KILLERBJDMEF8]

NICELY DONE! single cam power baby,mad props to the builder of this set up.

[exposure1453]

just wondering roughly how much boost can a stock d16 take?

[natemcclure]

its not about boost .its how much power a stock d can take dont go over 240-250 hp other wize you will fuck shit up umm if u cant put it on a dyno id just run 5-8psi dont risk 10 until you put it on dyno

[exposure1453]

so tuning it to roughly 200 would be fine?

just wondering so I dont end up blowing the motor lol

[prototype5021]

luv the bov :)

[thehondacrew]

wat u running

internal?

turbo?

how many pound u boosting?

cuz i have single cam d16 too but wanna know so i could do it too heheheh thanks.

[thehondacrew]

wat u running for?

internal?

turbo?

and how many pound u boosting may i ask?

[408baycivic]

nice...engine internals???

[psykilll]

Go mini-me!!

[dodgerskool]

what kinda turboCHARGER and blow off valve do u have?

[RoganSF]

had a turbo b18c myself. but i really am starting to love these little 1.6 singles. might buy me a few and start mesing with them.

[rsvcivic]

for the money you cant beat a turbo d16..lol i looooove mine. this is one nassty civic in the vid, i look to be seeing those numbers this summer i hope.

[heitormoura]

500whp @ ?????? RPM

thanks

[bogdan135]

8000, look at the graph in the H-T link.

[sleepinsohc]

OH SNAP!!!1! WERD!