Added: 2 years ago
From: Aaron92SE
Views: 23,415
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (100)

Sign In or Sign Up now to post a comment!
  • Aaron how do you make your transmission to spin while engaging 2nd gear?

    Mine does not do that probable because it locks or something.

    One more question does it hurt transmission to switch between 1,2,3 and D?

  • lol auto.

  • @LethargicxBird i didn't know nissan's had v-tech lol :P

  • Hi! I have a 91 Maxima. Could you do that same engine swap for me. If so, how much would it approximately cost. Thanks and congratulations!!

  • where did you get your torque converter from

  • big engine, light car, fun

  • Dont crash, your airbag is missing lol

  • LOL at his laugh. and shifting in an auto?

  • why r u shifting an automatic? its an AUTOMATIC

  • How old are you Aaron?

  • atomatic? gay

  • @inflof and he passes you just as you miss 3rd !

  • Hello Aron, I am considering instaling a VQ35 into my 72 240z, I was just wondering if theres a certain year Vq to look out for and also if a standalone ECU be better than factory ECU.

    Cheers

  • automatic ... fail

  • @lr4iNM4kerl And he passes you just as you miss 3rd! The quickest cars on the planet are automatics.

  • why is the question?

  • Naa it's got a fart can rice

  • BOOM head on collision would've been great

  • when inspection comes around and they do the diagnostics readout, no issues?

  • @DarkLinkAD Nope, no issues. It's a 1992 Maxima with only OBDI requirements. So they don't need to connect to my OBDII port.

  • is there a reason why your dash is missing?

  • @gearhead291 This swap was just completed when this video was made. There is a dash now.

  • i have no idea why people knock autos, i had a WRX auto with built bottom end sr40 turbo, ipt trans with stall, and would boost 19psi off the line!! i made more money with that car becuase of the "auto" then my ls1 6 speed camaro. only reason i sold it was becuase i couldnt afford to fill with 100 octane fuel anymore.

  • probably the fastest 92 maxima on the road right now lol

  • Aaron what tranny you runnin??? the stock 3.5 tranny...i know you have the SSv4 but are the internas built at all?

  • @stenholm1212 I am using the stock 92 Maxima transmission RE4F04V with over 225K miles on it. It's still holding up pretty well to the abuse. It's pretty good considering I am doing 150 more wheel HP than stock. All I've done to the transmission to help increase it's life is increase line pressure with a valve body recalibration and a transmission cooler. I also have a high stall torque converter, but that doesn't increase the life span of a transmission.

  • @Aaron92SE did you convert it to a full / manual automatic? You mess with transmissions a lot? Ive been in the hot rod seen for 16 years now and have done everything but mess with a transmission. Where did you learn how to increase line pressure and modify the valve body? Any recommendations on literature or whatever would be appreciated.

  • not a gay auto :l

  • what do you keep doing with the shifter?

  • @chrisinator13 he has an auto so hes putting it in 2 first him self lol u can get a harder shift to burn out in a gear

  • @chrisinator13 I'm shifting. Without a TCM, it will no longer shift by itself. I have since added a full standalone transmission control unit called the SSv4. The car will now shift itself going down the track as well as enable me to lock it any gear and shift manually as well. It comes in handy when making full dyno runs and doing my burnout.

  • So, why'd you stick with an auto if you were gonna go through all the trouble of a motor swap anyway?

  • gay auto

  • Thanks. Care to line up? :)

  • @Aaron92SE Yep, my Trans-Am with an LS-X will cream you at half throttle.

    My daily driver a 92 SE (I loves it btw) would cower in the awesomeness of your Max. Good work, but why the heck is she stalling? Nothing is sexier than chirping in an auto ;).

  • @Aaron92SE about a week away from attempting a full ecu swap on my 4th gen.. may need some help along the way, you might have a pm on the .org shortly haha

  • @don94pgt the only video you have your driving a honda.. i dont think you have the right to talk shit..

  • love the max bro, nice work!

  • hey i've been considering getting my stock headers resurfaced but not quite sure if its worth the money. since i saw that it was listed on your video, i wanted to ask.

    should i do it? or just get aftermarket headers? my whole reason for wanting to do either is because i'm lacking power lol

  • @D1ProjectFC You should achieve more HP from aftermarket headers versus porting your stock exhaust manifolds.

  • @Aaron92SE thanks for your opinion =)

  • @Aaron92SE and help lol

  • thats sick hommie. you just inspired me. i was just thinkin about puttin a 3.5L on my 94 maxima. keep doin what you do.

  • thats awesome man, must feel cool to own the fastest car in your class, congrats!

  • sweet car man, its a sleeper for sure. have you had it on the track yet?

  • @AFinRoo Yes, it is currently the world's fastest All Motor Nissan Maxima with a 1/4 mile ET of 12.15 @ 113.8mph. Please subscribe and check out some of our other videos of us breaking the world record.

  • @Aaron92SE Hey man I saw ya run that 12.10 last night, good shit, was gonna come down there and chat but had to leave right after ur run.

  • @jaxmarine85 Thanks. I ran a couple 12.0s that night as well. The world record is now 12.05 for the Fastest NA Maxima.

  • @Aaron92SE Good stuff man, hopefully my car will be out by the 23rd if so maybe I'll see you there

  • @jaxmarine85 Awesome! I hope you get your car running. I don't know if I'll be there on the 23rd though. I live a long ways from Coastal Plains and I'll only make the trip out there if I think I'll set a new record. The weather needs to be pretty good.

  • @jaxmarine85 Also, I am working with the owner of the Kinston Drag Strip. Starting Thurs, May 6th, there will be heads up import drag racing with 100% payout! Only $10 to enter! We'll have an NA class and a FI'd class. This race will be held the first Thursday of every month this season. Please help spread the word.

  • @Aaron92SE COUNT ME IN!!!

  • thats sick man for an auto, it sounded like it was still spinning but i was not sure. Are you going to put the interior back together?

  • @AFinRoo Yeah, the interior will be put back together one day. You can look at some of our other videos to see what the dash looks like now. It's a full race car which doubles as a daily driver. But it will be very nice once the interior looks stock.

  • you call that spinning deep into 2nd? lol it was a little chirp. but still decent for an auto.

  • @AFinRoo When the tires finally get traction in 2nd gear, they chirped a little bit. It's hard to tell by watching the video. You have to be driving the car to tell.

  • much props bro.. one of these days,, my 01 will be the shit..

    I'm taking notes....

  • much props bro..  one of these days,, my 01 will be the shit..

    I'm taking notes....

  • you are the Man. I have an 01. and i am already on my second 3.0 motor. and i think my tranny

    (auto) is going out? But I always wanted to swap out the motor for a built ass 3.5 with all the other goodies.. i could not believe how my car, stock with 20 inch rims was hanging in there with a mustang? could a car with the horse power you have be a daily driver too?

  • @anyshitt This is my daily driver. :)

  • Does it have a shift kit? I wouldn't mind if my '02 Maxima shifted like that!

  • Yes, the valve body has been redone.

  • nice to bad just sold my 1990 maxima :( blew out the gaskets

  • Why not toss in a built RE5F22A with LSD? Or maybe the world's first Xtronic drag Max? Tuning would be so easy with a tiny rpm range to worry about.

  • awesome work man! it screeched on second gear with automatic transmission! let me ask you this, I saw you that you kept shifting down with gear shifter and its automatic, isnt that a bad idea since you dont have a clutch?

  • No. It's no different than allowing the TCM to shift for you in Drive. All you are doing is changing the shift points. In this video, I still had the stock TCM in place. Now I run a full standalone transmission control unit and I shift up and down with a momentary-on switch. Similar to paddle shifters.

  • 0-60?

    nice fast car but the problem its front wheel drive ..

    its scary car when your foot all to the ground the steering goes right and left and if you where in public small street and other cars around it scare the hell out of you

  • I only run the 1/4 mile with this car, so I don't know my 0-60 time. But it does the 60 foot in 1.8 seconds and the 1/8 mile in 7.8 seconds at 90 mph. By analyzing my 60', 330', and 660' times, I estimate my 0-60mph time to be 3.80 seconds. Within the next couple weeks though, I should be running high 11s in the 1/4 mile NA.

  • does your engine burn oil?.

  • Nope. I completely went through this entire engine. The leak down test showed that the rings were in good shape. So, I just replaced the valve stem seals, headgasket, etc and put the engine back together.

  • Oh ok. When I had my maxima I was gonna do a 3.5 swap but alot if people said not to since it burns oil and would not be good for DD

  • well it shouldn't burn oil, unless the engine is all worn out.

  • i have 98 maxi and i drive with 1st second just like you did... people say "oh you goin fuck up the tranny"... wtf is that true???

  • No it isn't true if you understand how an automatic transmission works.

  • Nice, i wanna swap the 3,5 into my 95 max.

    what does it run 1/4 mile?

  • Low 12s All Motor without nitrous

  • nice swap...

    get that speedometer mounted...you keep having to put it back up. lol

  • The swap is fully complete now. The speedometer is now mounted. lol  I will try to post some updated videos soon.

  • boo automatic shift

  • I think I pee'd myself a little when he shifted it and got tire.

  • You'll never miss a shift in an auto, maybe hit the limiter, but never miss a shift. A properly built auto will beat any stick. Nice job Aaron92SE.

  • Yeah, but I will have a lot more fun in my stick.

    Besides any tool can race an auto.

  • but then agian theres alot of people who just cant drive a stick

  • FAIL!!! If you're going thru all that trouble to do a swap, why not get the manual??

  • sounds great! Gotta love torque steer with the 3.5 FWD!! I got my VAIS block plate Aaron thx!

  • i dont get it its auto but ur changing the gears?? what are you doing??

  • Putting it in L so he can ride out first a little longer.

  • you can change thru the gears on auto duh lol

  • idiot if its auto how the fuck do u chage gears:S thats why its called auto

  • With the 02 Maxima ECU and Tach signal, the stock 92 Maxima TCU was not able to shift by itself. So I had to manually shift in this video. I have since gotten a full standalone transmission computer that controls my shifts for me. Now I shift with a momentary on SPST switch. I use an automatic mode when at the track, though, so I can hang onto the steering wheel with both hands when launching.

  • Damn lot of torque steer

  • Nice, i like the auto trans, i live in naples so its alot of stop and go, not really the place for a stick..could this swap work for an 04 sentra 1.8L

  • There are a lot of the Sentra guys that have done the VQ35 swap. All of them that I know of use the Spec V's 6spd tranny internals with axles. They just swap the transmission casing in order to mate it to the VQ engine.

  • nice shifting the auto and chrping gears

  • one of the funniest shit I've ever seen. How many times can you say your gauge cluster is falling off in your life?

    But anyways, congrats on the super powerful automatic FWD car.

  • :) Oh that was before I mounted the gauge cluster. This video was just a quick test run before I buttoned everything up nice and neat.

  • I'm about to buy a 89 maxima automatic what kind of engine would fit in it? Just asking.

  • Most any engine will fit. The engine bay is plenty big enough for most any type of V6.

  • holy sh@#%1t nice job . hey id like to get my egnine rebuilt can you guys help me

  • I'm sorry. We only design and fabricate performance products at NWP Engineering.

  • dam so id have to bring my car there huh

  • No, we only design performance products. We do not offer any repair services or rebuild engines. I'm sorry.

  • awesome job! Snot load of work done

  • FIGHT THE TORQUE STEER!

    Nice job man!

  • sounds mean

  • nice i hope i can do my swap this year. except im doing it in a 4th gen

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more