Ok I just read on Wiseco that you need to change your EFI if you throw in a stage 2 cam, and higher compression piston , also higher the octane if you don't want damage done to your engine... Anyways tuning never cheap
I'm about to install Stage 2 Hot Cams on mine also... You must have less torque on bottom than OEM? Stage 2 Hot Cams are really meant for rev and more Top speed right? Do you know if I need new Valve Springs even though my EFI is the Dynatek Non-Programmable FS Ignition? I know this alot of questions! I just need somebody who's been there and done that! Thankx!
@doobyboy21I noticed a gain in top and bottom. Now from what Ive heard and read is that the HC3 is more top end and a little less bottom. As for the springs, HC's says you don't need HD springs (I didn't change mine).
I say the HC2 is all around a nice cam. If you really want to feel a difference, put an 11.1 piston in it and you can still run pump gas.
How much does it usually run to get em dyno tuned?
virginiabronc 1 year ago
@virginiabronc Starts at around $200.
MaxSteelATV 1 year ago
Ok I just read on Wiseco that you need to change your EFI if you throw in a stage 2 cam, and higher compression piston , also higher the octane if you don't want damage done to your engine... Anyways tuning never cheap
doobyboy21 1 year ago
Ok thank you very much for answering back! And your videos are just great! If you don't mine I put this one in particular on my IPOD!
doobyboy21 1 year ago
@doobyboy21 No problem, and thank you very much.I think that's great that you put it on your iPod! Don't hesitate to ask me questions you might have.
MaxSteelATV 1 year ago
I'm about to install Stage 2 Hot Cams on mine also... You must have less torque on bottom than OEM? Stage 2 Hot Cams are really meant for rev and more Top speed right? Do you know if I need new Valve Springs even though my EFI is the Dynatek Non-Programmable FS Ignition? I know this alot of questions! I just need somebody who's been there and done that! Thankx!
doobyboy21 1 year ago
@doobyboy21I noticed a gain in top and bottom. Now from what Ive heard and read is that the HC3 is more top end and a little less bottom. As for the springs, HC's says you don't need HD springs (I didn't change mine).
I say the HC2 is all around a nice cam. If you really want to feel a difference, put an 11.1 piston in it and you can still run pump gas.
MaxSteelATV 1 year ago
@doobyboy21 Go to tqsatv for all your quads needs, tell them I sent you...
I have a cam and piston install video if you need help!
MaxSteelATV 1 year ago
is it to much of a problem to install the hot cam
0321DGP 2 years ago
No it's really easy. I have a cam install video you can check out.
MaxSteelATV 2 years ago
@0321DGP Not at all. I have a cam video you can check out. It's in my videos somewhere... Thanks for watching!
MaxSteelATV 1 year ago
Are these Hot Cams any good? How is your engine since you placed them? Does it take more oil?
doobyboy21 2 years ago
Yeah there good. Gave me some more power. No it doesn't take more oil.
MaxSteelATV 2 years ago
Nice vid, I always wondered how they dynoed ATVs also...
RangerX5 2 years ago
Thanks
MaxSteelATV 2 years ago
nice
raptor700boy34 2 years ago