Airsoft GI - Madbull Dragonfire RIS Installation Instructional Video

[FOX814]

"a lot of you guys are going to have an orange flash hider, just make sure you put them back on, obviously it's against the law not to have an orange tip." this wonderful statement makes me laugh for two reasons, 1: if it is illegal then why are you making a video with a gun without the orange tip? and 2: if it is illegal then why do you even sell aftermarket flash hiders without any orange? I don't need everyone to try to tell me the answers to my questions, I just want people to think a little

[GhostProdigy4]

@FOX814 Its illegal to have the gun out in PUBLIC without an orange tip. That is also why they recommend you keep your gun in a case or bag, because 90% of the air soft community either takes them off and replaces them or paints them black.

[jakeplayer23]

Can u do this w/out a delta ring tool? where the hell do u get those?

[LoneWolfLeonSKennedy]

i like this one

[AirsoftShizsAndGigs]

what was the base gun in this video? a dboys?

[jrsoxfan04]

Put Frank in more videos!!!!

[DeathShepardAirsoft]

I thought it was only illegal to distribute sell or buy an airsoft gun without the orange flash-hider

[rambovschucknorris1]

Basically I was wondering if it was needed to put the front sight back on the gun? If the unit uses the sight to keep it stable and what knot

[matthew767xbxbxb]

i love the video style

[zerofan107]

hey i was wondering if i could do this to a 416

[Ricksterw1]

loooool

[MACER545]

does this ris fit a G&P body?

[CashRaining]

ASGI doesn't carry a tool to remove these they put them on so tight on the G4 A3s I can't get it off! The front flip sight too

[indigo2012v2]

what the hell about the 2-piece rails?

[LilFooza]

So basically..........

[merlin1111100]

why cant u fit a battery under the unit?

[thehammerofzuess]

you guys should start a tech series showing how to do reapairs and such

[CurvingEdge]

anyone have any experience fitting a battery in the ris?

[jayheuk]

WHAT THE HELL IS A DELTA RING TOOL? and is there an alternative?

[barelylogical]

@jayheuk look it up on airsoft gi. they go for like 20 bucks

[raggie817]

What is on the draw strings of his hoodie?

[B34STS1P3RZ]

tim im 11 and one day i wanna be like u ur my inspiration one day ima walk into ur store and demand the job and ima work my but off 2 meet u one day hope u get this message if u write back that would mean the world 2 me thanks always ur best fan andy

[XxzLiLxXxDeViLzxX]

what about how to put a front flip sight on

[gobldegook100]

Would this work on my agm m16a4? Would I need to / what else would I need to purchase to install this? Please answer! Thanks

[LilFooza]

"basically"...........

[123airsoftninja]

@superchinnychinchin Yes it does.

[Poizon2K8]

the next video (Boarding Operations with Integrity Tactical Solutions) is blocked for me. it (apparently) contains content which EMI have blocked from viewing outside the US. this sucks lol

[TheTacticalAirsofter]

Hey Gi can you do a tech video on installing the outer barrels of M4's? I don't know how to put them on.

[barelylogical]

@TheTacticalAirsofter well for my m4 all you have to do is remove the delta ring and yank the barrel out and install a new one

[echoblaster42]

With this work on an echo1 m4 with out threaded delta ring

[barelylogical]

@echoblaster42 no

[ramagupa]

does this work on kwa m4 / m16 series.

[sasquatch4liffee]

does anyone know if KWAs bodies use standard threads that the delta rings screw on to?

[sammaxwell12]

will this fit my ics m4 sportsline?

[xshakashakax]

wait i got a question. i have an m4 with no rails. i was thinking about getting this so that i could get a vertical grip on it but the battery is hidden inside the handguard... i think it would still fit but how would i take it out to charge??? do i have to do everything he did at the beginning just to recharge it?

[sasquatch4liffee]

@xshakashakax i would recomend a PEQ box to keep the battery in

[DeltaNovemberLima213]

Do you necessarily need the delta ring tool to remove and install the delta ring?

[sasquatch4liffee]

@DeltaNovemberLima213 its a good idea

[dkbikes65]

LOSE THE BEARD FAGGOT!

[kululufanman]

i like this one

[bugismynickname]

Wht ris systems do you recommend for a ca m15a4 rifle??? It has an m16 length hand guard

[MrPUDDINGFREAK]

How long is your barrel ?

[MarksmanLeBlanc]

what if my gas tube is say six to eight inches long but my new ris rail is 16 inches? Would I have to scrap the old gas tube?

[claridude]

@MarksmanLeBlanc You could scrap it and buy a new gas tube, or you could buy a low profile gas block to put under your long-ass rail system

[HeatZero427]

Nice watch, just sayin...

[2GuysPlayingCoD]

I don't really like the smaller shot in the corner. It blocks the big picture which is much more important to see.

[ak47man2000]

cold you make a video on how to install the socom gear mk18 ris uint?

[MrKingofairsoft]

My flashhider is glued on, how can I get it off to install this ris system, and if I don't remove the flashhider will it do much harm?

[blamtam]

if it's illegal why the hell does airsoft gi have a black flashhider? I got your address so time to call the police for firearm inpersination

[blamtam]

if it's illegal why the hell does airsoft gi have a black flashhider? I got your address so time to call the police for firearm consealment.

[darkcarguy]

i think it would have looked better without the triangle sight

[fearthegeeklord]

Weird pic-in-pic simultaneous close up thing hurts my head o_0

[reallink2000]

ooh so i dont need a ras fix to stabilize my ris i can use screws too!

[hatteras33]

yes this is a good format. i had an idea for other videos though. if ou had a high speed camera you could show bbs hitting say bob to show what they do in slow motion

[ipodhackr]

This format is awesome

[96amadeu]

tiny tech

[Jason1087870]

6:57 LOL

[Wulff291186]

That are real good Instruction Videos!

But you should remove the Handguard Cap from the Frontsight, it looks awkward.

[LGVybz]

i liked the format but, he was a little big. he looked cool down there but he could use just a slight decrease in size because it sorta got in the way of the bigger view. thats my only suggestion, great job otherwise

[SharkFrnzy21]

Frank's a boss

[beavbeast69]

Getting the front sight post off is almost impossible. I too have a KM4 and the gas tube annoys me. Thanks for finally doing a video on how to remove the triangle sight. Yours is one of very few on the internet.

[farmboyEN]

Yeah this is the best format. really great love the videos

[awsome1948]

Hi I was wondering if you guys would be interested in sponsering and airsoft team and feild I am asking you becase you have the best guns and tips and it might look better if you sponserd an airsoft leuge. Just email me at tjg97@yahoo.com I started the leage and own the feil and a team

[ramandhi987]

@awsome1948 i would send them a pm, they probably won't read comments

[markubiak]

Frank would be so much more BA if he shaved his beard.

[airsoftgunman94]

for some reason i wasnt able to put my front sight back on

[Bulletallica]

Show us how to rewire the gun to a crane stock! All these guns have a crane stock, what about the people who don't already have a crane stock? I'm sure i'm not the only one who doesn't want a huge peq box sticking off the side of my gun.

[Sierra4Delta]

please do some for m16

[rambovschucknorris1]

hey will this fit on an ics plastic sportline

[FootmanBas]

hey tim...maby if you break down the construction video into steps, as apposed to just one long video.

I think that people new to gun customisation would really apriciate a step by step way of explaining things.

Like...step one, get your tools ready ( while offcourse frank is explaining what kind off tools and what not.

Step two...

etc etc.

Think about it and looking forward to the new How too Tech video!

[HOTTESTHERE]

if i have a G&G GR15 Raider CQB Electric Blow Back what metal bodies fit it do i have to get the G&G Metal Body for G4 and CM Blowback Series or can i get any other ? and also does the novesky upper fit the other m4 lowers that is full body?

[pinky0394]

When willl the ARES SCAR be in stock, ive been waiting to buy it for months now...

[FluffyBoy32]

Show how to do a free float RIS where you have to substitute the front site for a gas block. Sorta like the KWA SR-10 looks like. I get a lot of questions about this and if you could answer it, it would be one less question I would get asked!

[TheLaxmonster5000]

do one on barrel extension

[lacrossplaier55]

hey i have seen all ur how to vids and i really have to say i like this one the best and being able to see the person its definitely way cool, thanks for listening

[S33KY]

Can you show how to do that on a gun that has a S-System Front Sight?

[DrewRod13]

Would you guys (AirsoftGI) sell a set of those lock screws by themselves? I have the rail system but the screws rusted over and i plan on switching the RIS to a different gun without switching upper receivers entirely. I've already tried to take it off like normally, but the heads stripped, and the only way i can see to get them off now is to cut the screws along the shaft.

[LinkinODST]

I have a G&G Gr16. I'm not sure if I could install this ris on my gun, because the orange tip will not come off.

[snipesnrifles]

Free magpul massada for everyone who bought something at airsoftgi when you guys hit 500 videos?

[THISSONGISBULSHIT]

@snipesnrifles im gonna get one then

[NepaAirsoft]

Great Format. I am liking it.

Suggestion:

-New Barrel install (Tightbore) with Bucking & Nub Replacement. Maybe even a new Hop Up Chamber.

-New Stock Install. Crane, Folding or Full stock on a gun that did not come with one.

-Mod on a Gun other then a M4 Variant.

[10Target]

there is a small colony living on his chin

[monkeyface291]

you should do some internals

[Hunterc191]

Not having an orange tip is not illegal, only illegal to sell/ship without an orange tip

[0mgwtfbbq21]

can you fit a battery in it?

[0mgwtfbbq21]

what if it has a gas tube?

[CheytacOps]

Badass.

[moonshadowstudios]

I Really did like the format. But i think that one thing that would make it better would be an overview camera. So that when he is doing something on the table you can cut to us looking down from the top. But other than that i do like the tiny tech man format. I love the series and hope to see more episode. You rock GI

[hayahusa44]

I need a job so that i can buy all this stuff :P

[xXJetwiiXx]

Is this the same RIS on the g4-a3?

[airsoftenforcer]

@xXJetwiiXx yes



[marineairsoftsniper7]

@xXJetwiiXx yes



[AgentHydra]

yea obviously be sure to put the orange tip back on... like they do at ASGI 0_o

[Korentokuulla]

@AgentHydra im not an american citizen, so dont berate for asking this,

if you have a firearms license , could you theoretically have a black tipped Airsoftgun, so long as you conform to laws of carrying in a dedicated weapon bag, and dont go brandishing it around in public and such,

i dont know all of americas firearms policy , which is why i ask

[Cryptex410]

The green screen is very disorienting when you move the camera around like that. It's like he's floating.

[snowboarder2510]

i like this version the best because it shows the main stuff big but it also shows what he is doing.

[dbaker41795]

i like the series, but i would like to see you guys do different installs, perferably with gearboxes. I do like the tiny tech version best

[legoguy69]

is it necessary to put the front sight post on again?

[Arathlo]

@legoguy69 No, but if you have a gun with a gas tube you're going to want to, or buy a gas block.

[mrecholizard]

can u do a vid on how to wire a m4 that is wired to the front but wire it to the back instead

[SelryamZephine]

I would like to see maybe different view shots, like an aerial or side video shots. I do not think it is one-hundred percent to the small 'window' view of Frank, because the main attraction is the process of how to; even though Frank is good-looking, I think the camera view should be focused 'close' to the gun, and parts throughout the video - besides the introduction & ending. Keep up the great information output!

[wolfpack3421]

The reticle would rest on the middle prong on a post sight.

[metsnygiants]

On an acog type sight, would the reticle rest above the m4 platform front sight or would it have to be removed?

[TheTacticalAirsofter]

@metsnygiants It would be more preferable to remove the front sight because if you shoot with one eye you wont be able to see on the other side. Also the height depends on the sight.

[metsnygiants]

@TheTacticalAirsofter Yeah mine's not built the same way, i think the pins and sight are made with plastic and melted together. But Generally would it? Thanks for the help btw.

[the1suppresor]

best of the formats, mind doin a video on the installation of a longer barrel and new rail system for an E90 (P90)? thanks!

[DeHawk89]

This format is best=) Also, could you do a sniper tech? Does not have to be a "sniper" sniper, semi-automatic AEG sniper is fine too=)

[brianchildres1]

Its not against the law... learn your laws... I have read the Texan law over about 3 times. It is illegal to transport your gun in clear sight without a orange flashider OR barrel covering. Also, it is illegal to show your AEG in public, ORANGE FLASHIDER or NOT... meaning on private property, you dont have to have one. A orange tip just clasifies your gun as a AEG, taking it off makes it a fire arm in the eyes of the gov. Sooooo, if you play Mil-Sim at real fields, or on private prop, you ok..

[nomanoryesman]

if its against the law to not have an orange flash hider....why do so many people have black ones and not orange ones.

[ShadowCoAirsoft]

Very informative. Also really helpful. Keep it up Gi. random but may I suggest some longer lengthen FMG4's. As always good work.

[ELITEclan100]

The Green screen worked great!! No faults at all with it!!!!

[soccaman847]

if having no orange tip is illegal, WHY DO U SELL BLACK FLASH HIDERS??

[VonSpykke]

@soccaman847 Not illegal everywhere ;)

[RebelRaidersAirsoft]

I like this format the best.Its great! The how to tech series has really helped me. I have followed you guys since the beginning and love it. I would really appreciate it if you would do the how to tech rail install on a kwa km4. Thanks!

[AIRSOFTGIdotcom]

@RebelRaidersAirsoft it's the same process as this gun.

[RebelRaidersAirsoft]

@AIRSOFTGIdotcom

Thanks then! Keep up the great work!

[AirsoftShizsAndGigs]

@AIRSOFTGIdotcom what if you dont have an AR wrench?

[claridude]

@AirsoftShizsAndGigs buy one

[AirsoftShizsAndGigs]

@claridude there 35 bucks... there expensive.. idk if you know that

[claridude]

@AirsoftShizsAndGigs they can be found for 15 dollars.

[AirsoftShizsAndGigs]

@claridude is that so?

[claridude]

@AirsoftShizsAndGigs ebay is your friend

[tv321123]

@RebelRaidersAirsoft this and the km4 are the same design it should work

[flat6fanatic]

I like this format the best.

Also please please do another ris unit but next time do a video on the socomgear mk18 ris