How to Install CXMB Full Version Pt. 2

[TheWinpogi]

When i go to theme settings...... it suddenly hanged!!! what happened????? pls help!!!

[doubleaa25]

@TheWinpogi From what I remember, that is caused from a corrupt theme from your THEME folder.

[GAMERC3]

its not m three three its m thirty three get it right

[doubleaa25]

@GAMERC3 they are both right. Your point? I read it digit by digit whereas your reading it as one word.

[12345678983583]

thx brother .but i'ts ok about ur pc lol good job

[tomekps3]

When I press square the eboot is ok but then it says PSAR too big!!!???

HELP!! PLEASE!!

[Nikiudel]

help?????

whenever i press square on my psp,it says ERROR READING EBOOT.PBP i have the eboot for my custom firmware! WHAT IS WRONG??!?!

[doubleaa25]

You need the official eboot.

[chilopopcorn]

MINE SAIS EBOOT error reading eboot

[emochilli]

wad if my version is 5.50 gend3?

[DeathGrunt1616]

then u down grad

[fred4429]

thanks a lot it helped

[yosoy]

hey hi!! i got this little problem it said when i click on my psp to that eboot file says: imposible to iniciate game information is corrupted or something like that the point here is what was i suppose to do with the RS folder please help me i really like the look of the ctf hope can have fast answer

[XxCxuXitoXx]

mine only make the folder

[pimp62797]

can delete all files when i finish except the seplugins?

[doubleaa25]

Except SEPlugins folder, cxmb folder.

[PENIXXX]

how can i get ur RSP DUMPER ???

[cmoises4]

i hav 4.01 n it still doesnt work

[j10c431094]

can you post a 3.71m33-4 eboot. i cnat seem to find any

[doubleaa25]

You just need a 3.71 Official Firmware Eboot.

[lb8068]

When I try to run the dumper, it says it requires 2.81 or higher, then shuts down. PLEASE HELP!

[lb8068]

Never mind, I figured out it was the kernel I was using, should have been set to 5.XX!

[Falador321]

my psp didnt take a dump, it didnt work for me

[dutchkiller66]

if i click on enable on recovery menu than i press on back it goes automaticaly to disable again what i do wrong please help :(

[doubleaa25]

If it says enabled, then its on, If it doesnt, then its off. U click on it to do the opposite of what it says. For example, if it says disabled, click on it to enable it.

[95chicken]

smokin the reefer ehh? lol jk nice tut

[newarkcrossover]

at 2:17 my psp didnt do that all it did was create the folders and it didnt say expanding or anything after it was done making the folders, it shut off and then when i went into usb mode i went to the DUMP folder and all the folders were empty can you help with this situation please hit me up ASAP thanks ^_^v

[newarkcrossover]

oh yeah and BTW i have 5.00m33 6 CFW

[doubleaa25]

You need to use the PSARDumper for 5.00 M33.

[xBrunoGalli]

ASIASISDIASDIASDIASDIASDIASDIA­SDIASDIU sry i was bored :P

[Teaser12345]

my psp got bricked

[fakeslayer93]

do u know how to unbrick it??? i do... just saying if u need help

[wigwam121]

when i went into recovery mode the plugin was enablrd so i left it enabled and i went into themes and the one it came with was not there (and yes i did put them in there)

is that saposed to be??if so then where do i downlad some?

thankx

[doubleaa25]

OK, make sure you are downloading the themes for 5.00 M33, make sure you are using .ctf files.

[wigwam121]

oh yea....i think they where for 3.90m33.

thanks.

oh, where the that I put into (my psp)>PSP>THEME. suposed to show up in my themes on my psp (2000) with 5.00m33???

and thanks again for replying so fast.

(if your wondering why im on on a week day its becuase im home schooled and i snuck on)

lol =] relly quick..........

[wigwam121]

Oh and do you know where I could find some good ctf themes? and when I get them do I just drag them into the THEME folder...(after axtracted)?

[doubleaa25]

OK. so yes it goes in PSP/THEME. You do not extract the .ctf file, but you usually get them in .zip or .rar files, and you extract thoses to get the CTF. A good place is consolespot . net and endlessparadigm . com

[dowling1981]

What about the roads that were advocated by the Konami industry?

[wigwam121]

ahhhh!!! i did everything you said to but when i went to: DUMP>F0>vsh>module...the folder is emty!!!! all the folders are there but no files in them!!!....you said you where going to post the 3 files we need....when plz????

[doubleaa25]

I do... don't I??

All right, I will do so ASAP.

Ill get 5.00, 4.01, and 5.02 GEN.

[wigwam121]

ok thanks ...( I have 5.00m33)

P.S.

which video are you going to post the files on? (part 1,2 or 3)

and how lon do u think it will be untill there on there?

thanks alot!

[doubleaa25]

Probably later today, and Ill try to post on all videos...

[wigwam121]

oh and if i have CFW 5.00m33 do i get the official eboot and name it EBOOT or the eboot for the CFW 5.00?

[doubleaa25]

You want the Official Firmware EBOOT. I believe I have the link for it in my video.

[wigwam121]

ohhhh i had a cfw 5.00 eboo...

ill try that...

[doubleaa25]

OK. Anyway, im editing the descriptions now, so wait a couple of minutes and what you want will be in the description!

[wigwam121]

thanks a lot for getting them on there tonight....like i said i can only use the compter on weekends...ill try it and see if i can get it..=]]]]

[wigwam121]

hey..i dumped and then went i went to flask folders it was empty when are you posting the files????

and another thing...where do i put the plugin if i already have some?

please plaese plaesae respsond thnx!

[doubleaa25]

So, put the CXMB folder in the root of your memory stick. Easy.

in VSH.txt in SEplugins, type ms0:/cxmb/cxmb.prx

[wigwam121]

i already have a vhs txt file in seplugins for another plugin....will it mess anything else up?

and thats al lot for responding so quick

[doubleaa25]

Well, for example, you probably have one line with:

ms0:/seplugins/****.prx

After that, hit enter, and it should look like this:

ms0:/seplugins/****.prx

ms0:/cxmb.cxmb.prx

And that is how it is set up.

[wigwam121]

ohhhhhh yeaaaa...i forgot that.

thanx so so so so so much for that and for responding sooo fast....be cuase i only get an hour of computer and psp/ipod time on saturday and sundauy (and then thats all)

but thanks aloooot anywAY i totaly subscribed!=]

[icedsolid]

Yep works fine now. Thanks! 5 star video

[icedsolid]

Oh, it also says something like "cannot decompress"

[doubleaa25]

Just let it decompress, or decrypt. If it does not do all of them, you will still be okay.

[icedsolid]

Hey, I have a problem... with the new_psardumper i put that folder into psp/game/ and did nothing with the src folder. I then loaded the program and did a dump of the files... it did it but some of the times it would say "Warning: cannot find path of XXXXX" what does this mean?

[Rawfaith15]

I cant see the cxmb.prx on my recovery menu, whats wrong?

[doubleaa25]

First, make sure you go into the Plugins section of the recovery menu. Next, make sure you type the right thing in the text document. After that, make sure the text document is located in seplugins with the name VSH.

[44thphenom]

Could of told us we should of backed up -.-

[nhadglz19]

hi can u make an not video guide? i mean in a htmL file with pic? any description? if can plz.. thnx

[doubleaa25]

Depends on the amount of time I have to be able to do so.

[YoungEagle450]

When i dumped My PSP, I had all the folders, but not the files; the folders were empty.

PSP Slim Black

5.00 M33-3

[doubleaa25]

Were u using the RSPSARDumper or the PSARDumper for 5.00 EBOOTs?

[YoungEagle450]

I know whats the problem was.

Full is for Phat PSP

Lite is for Slim PSP

I succeeded in my plan XDD

Thanks anyway =)

[doubleaa25]

Not necessarily though...

I have a PSP Slim (PSP-2001) and it worked perfectly.

But as long as it works for you, enjoy!

[GoldenDeath28]

im using the cxmb and seplugin folders from your description though..not sure if they're firm 5.00 capble

[doubleaa25]

It should be CXMB 3.3...

[GoldenDeath28]

nice computer, I get the F0 thing then i copy and paste the 3 files he says which are: common_gui.prx , vshmain.prx , paf.prx . I enable the thing at the recovery menu but then i cant see any of my themes and I got em at the PSP -> THEME folders. OH I GOT VERSION 5.0 M33-4 with the version 5.0 EBOOT in your description.

[doubleaa25]

Make sure in VSH.txt you are writing the correct information. Also make sure that you have themes that are for 5.00 M33 firmware.

[GoldenDeath28]

written in the VSH.txt which is in seplugins? it has ms0:/cxmb/cxmb.prx written in it. And yeah i got dragons gem which is for 5.00 and blue chrome also i got the random one and apollon. in the "cxmb" folder theres a conf.text which says /PSP/THEME/random.ctf . Is that right?

[doubleaa25]

Are you sure you are using the CXMB Plugin for 5.00 M33? Because the CXMB Plugin for 4.01 M33 does not work with newer firmwares.

[GoldenDeath28]

Yeah, Im using the 500.pbt , then I changed it into EBOOT.pbp and im using the dumper for firmware 5.00 in the description. the new_dumper

[BammaSpamma]

:L research, i believe :L

It's resource :L.

[rowdyred333]

How come my paf.prx file doesn't work.... could I borrow yours?? for 5.00

[doubleaa25]

Yes, You could. I will probably post a link for the 5.00 Firmware Dump. Expect this later today though.

[delMikey]

after doing all the dump it says Folder created with no problem. Oh I think it's time to go!

'00001'

then it just turns off.

when i look in DUMP/fo/vsh/module,

it's empty...

[doubleaa25]

Try doing it again and see what happens.

[fakeslayer93]

i have this same problem... if you can please help

[doubleaa25]

I am planning to post the 5.00 DUMP files later today, so if you have 5.00 its your lucky day...

[fakeslayer93]

yes i have 5.00 m33.. WOO HOO!!!

[fakeslayer93]

after doing all the dump it says Folder created with no problem. Oh I think it's time to go!

'00001'

then it just turns off.

when i look in DUMP/fo/vsh/module,

it's empty...

if ur still wondering look at my vid

[doubleaa25]

i will check it out. there is a new PSARDumper so I will need to put the link to that in my description. give that a try and tell me if the same thing happens.

[damongripper555]

and yes my plug-in is enabled

[damongripper555]

where can i find custom themes for FW 3.80 M33-5 cuz ive traied a couple like the x-box 360 but when i cut my psp on it got stuck on the x-box beginning then it cut off so i had to deleat those themes and all the themes i find are for like 3.90 FW and up

[doubleaa25]

endlessparadigm . com

consolespot . net

[damongripper555]

hey i got everything ok but the thing is that the themes dont show up on my psp, they did show up but then they went away, what do u think i should do?

[doubleaa25]

Make sure the plugin is enabled and make sure you are using themes made for your firmware.

[damongripper555]

i found the EBOOT but idk how to download it

[damongripper555]

hey i need help downloading the psp EBOOT 3.80 M33-5, can someone help me cuz i cant find it to download it

[doubleaa25]

Google it.

[dannythekidd]

the PSARDumper for 5.00 M33 has to be only for 5.00m33-3 right?

[doubleaa25]

For 5.00 Firmware EBOOTs.

[17canucks20]

IT SAYS ERROR DUMPING FILE

[doubleaa25]

Make sure you are using valid EBOOT.

[javen504]

I NEED AND EBOOT FOR 3.71,PLEASE

[doubleaa25]

Just google PSP Firmware 3.71 EBOOT.

[javen504]

I NEED AND EBOT FOR 3.71 M33

[mpwner11]

i renamed

[mpwner11]

it says unable to find eboot it renamed my 500 to EBOOT.PBP

[doubleaa25]

You need to use the newer one. The 500.PBP needs to be renamed to EBOOT.PBP and located at the root of the memory stick.

[dannythekidd]

nm thxs

[12PedroSantos]

THANK YOU SOO

MUCH!!!!!

[monkeyzruletheworld]

plz help ! i have 3.90 m33-3/fat psp. i start the red scurille press square then it says EBOOT.PBP cannot be read plz help

[doubleaa25]

You need to get the 3.90 EBOOT. The download link is in my description. Make sure you rename the file to EBOOT.PBP

[JCLikeJMAN]

Research? lol Resource. ha ha. God Dam your slow

[doubleaa25]

Run the Dump again.

[starvatsa2]

The header of the Squirrel is same 00fc655

[doubleaa25]

What you mean by that?

[starvatsa2]

nevermind got it..

[starvatsa2]

So then we can have flash themes Right? its hard to get the EBOOT.PBP File... plz can u give me a direct link?

[bob5455]

Mine Just Says Unable To Start Game

[doubleaa25]

Type of PSP and Firmware Please.

[nmmnbg]

i downloaded the eboot and it said corrupted data

[doubleaa25]

Ur not supposed to put it in game. it goes in the ROOT of the memory stick with the name EBOOT.PBP

[RisckyyyofUMW]

At 8:32 in your video i saw that u had a FONT and VSH files in your cxmb file

i didnt get that in the one i downloaded so did i do something wrong?

[doubleaa25]

You need that if your making your OWN CTF Theme. Has nuthin to do with getting the plugin.

[nothsaydoom]

i have cfw 4.01m33-2 and and when im in the dumper after i hit square it says "Error reading EBOOT.PBP" please help me??

[doubleaa25]

You need to put a EBOOT.PBP at the root of the Memory Stick. I have the download links for it in my description. You Want the 4.01 Eboot and you will need to rename it EBOOT.PBP.

[NoLLeTeRReuR]

i get to the part when you heve to start RSPsarDumper... i select RSPsarDumper, the psp resarts end then it say's: ''this game cant be started''

i have version 4.05 on my psp... please help me

[NoLLeTeRReuR]

i'm sorry it says:''this game cant be started(80020148)''

[doubleaa25]

You Need CFW. Sorry. Get it by making a Pandora's Battery.

[gonzalezgrsld13]

how do i make it work plz help

[ShenjiTokuNA]

CFW only

[gonzalezgrsld13]

i have 3.90 m33-3 and it says error reading EBOOT.PBP

[doubleaa25]

Did you make sure it is the 3.90 Firmware Eboot your putting at the root of the memory stick with the name EBOOT.PBP?

[gonzalezgrsld13]

yes

i even double check if it was the correct one but it still says error reading EBOOT.PBP

[doubleaa25]

What type of PSP and Firmware do you have?

[gonzalezgrsld13]

you mean it has to be the 3.90 firmware

b-cuz im putting the 3.90 m33-3 firmware eboot

on the root of my momery stick

[doubleaa25]

You should be putting the official Firmware EBOOT at the root of the memory stick.

[coolmango95]

i dono no u give me the link cause i got the link from ur description is it right?

[doubleaa25]

Wait a sec, this is a test.

[coolmango95]

wad test?

[doubleaa25]

Wont post the answer i want it too.

[doubleaa25]

WTF? It wont post! Is it ok if i PM the answer to you?

[coolmango95]

definitely

[coolmango95]

mine is 3.71-m3.33 btw thanks for replying so fast

[doubleaa25]

No Problem. So Are You Using the 3.71 Official Eboot?

[coolmango95]

mine says error reading EBOOT.PBP

[doubleaa25]

Make Sure EBOOT is at the root of the memory stick.

Make sure you are using the compatible eboot (3.71-4.05)

Make sure the name is EBOOT.PBP

If none of these work, please PM me.

[tylertheman6]

It could not read my EBOOT what should i do

[doubleaa25]

Make sure the EBOOT is in the Root of the memory stick and is named EBOOT.PBP

[kalekalekale]

hey what files can i delete after ive done all this successfully?

[doubleaa25]

The Whole Dump Folder. It takes about 20 MB of space.

[dannythekidd]

i have cfw 4.01 and where can i find a eboot? help me plz ty 5/5 u rock

[xHALOxPRODIGYx]

ummm the rspsardumper wont load do u need an internet connection?? or somin cuase im doing this round my nans and she hasnt got wireless internet

[doubleaa25]

You Don't... What is your Firmware and type of PSP. Information needed to help you.

[xHALOxPRODIGYx]

my psp is 4.05

[doubleaa25]

Well, that is why. It isnt custom firmware.