I have a 2007 v6 ford fusion what other performance parts can you recommend and where can i get/install them? sounds amazing btw i hate ricers this sounds perfect
I have a 2007 v6 ford fusion what other performance parts can you recommend and where can i get/install them? sounds amazing btw i hate ricers this sounds perfect
@dliniypasha Any chance you know what the Magnaflow part # for the muffler is? If not, I can look it up if I know the case size is (appears to be oval so it's either 5x8 or 3.5x7") and whether it came with the tips welded on.
@Mebloise it resonates inside the car around 2700 and 3500 rpms i believe. i have this on my car right now but i do not like it. it sounds good but its not very loud. its useless to put it on basically. i am straight piping it this week with 3 inch pipe. i will post a vid maybe
I'm thinking about installing 2.5" exhaust piping and a 2.5" in/out magnaflow muffler on a 2.0l I4, is it gonna sound like a ricer (exactly what I DO NOT WANT) or will it make it have a bit of a deeper tone? (what I want)
Hey I also have a V-6 and was wondering if you have used or know anyone who has used an intake resonator delete and or a steeda cold air intake. If you do how did you feel the performance of your car. I have had a fusion for a year now and am trying to keep the new car feeling by trying some new things. Anything you recommend?
lets see, I currently have the Steeda CAI, Magnaflow Exhaust, and X-CAl2 Programming Chip... with a light foot on the gas I'm averaging 28mpg... and a heavy foot on the gas I'm averaging 20mph... depends on how you drive...
This has been flagged as spam show
I have a 2007 v6 ford fusion what other performance parts can you recommend and where can i get/install them? sounds amazing btw i hate ricers this sounds perfect
walkinggolfer1221 3 months ago
I have a 2007 v6 ford fusion what other performance parts can you recommend and where can i get/install them? sounds amazing btw i hate ricers this sounds perfect
walkinggolfer1221 3 months ago
Sounds nice. Still have the car? Check my page, I put Magnaflows on my 2011 Milan 3.0. They sound really good!
MyMilan1965 4 months ago
did you notice a big difference in noise over stock and in your opinion, in person does it sound like a ricer. By the way, sounds good on video
briant179 8 months ago
@briant179 Not too big of a difference but it was enough to make it sound nice. Not Ricey at all.
dliniypasha 8 months ago
@briant179 thats exactly what i want. If you know, what is the model number and is this just the muffler or the cat back full exhaust?
Thanks
briant179 8 months ago
Hi, you use just the Muffler on a stock exhaust?
Cat back or not?
Thank you, the sound is PERFECT!
abreuxr 9 months ago
@abreuxr Just a muffler.
dliniypasha 9 months ago
@dliniypasha Any chance you know what the Magnaflow part # for the muffler is? If not, I can look it up if I know the case size is (appears to be oval so it's either 5x8 or 3.5x7") and whether it came with the tips welded on.
StingerPerformance 7 months ago
@StingerPerformance Go on ebay and look for Magnaflow 14832 (14"x5"x8")
dliniypasha 7 months ago
I4 or v-6?
calimo92 10 months ago
@calimo92 V6
dliniypasha 10 months ago
@dliniypasha think something like this would sound ok on my 4cyl then??
calimo92 10 months ago
@calimo92 no. It has been done.
dliniypasha 10 months ago
how loud is it inside the car?
FutureMarine246 1 year ago
@FutureMarine246 wasnt loud at all.
dliniypasha 11 months ago
sounds like VQ35 engine awesome!! from a nissan
chainsawmanny 1 year ago
jesus fucking christ it sounds so good i cant wait till i save up enough to do it!!!!!!!
HoboSmeller 1 year ago
Thanks for the reply, I'l wait for the next video!
Mebloise 1 year ago
did this set up make the check engine light come on
rjdivad 1 year ago
@rjdivad no
dliniypasha 1 year ago
I have a 2009 sel and I would like to know what the sound level is like in side the car. Is there much resonnce?
Mebloise 1 year ago
@Mebloise it resonates inside the car around 2700 and 3500 rpms i believe. i have this on my car right now but i do not like it. it sounds good but its not very loud. its useless to put it on basically. i am straight piping it this week with 3 inch pipe. i will post a vid maybe
kylewoloshyn14 1 year ago
I'm thinking about installing 2.5" exhaust piping and a 2.5" in/out magnaflow muffler on a 2.0l I4, is it gonna sound like a ricer (exactly what I DO NOT WANT) or will it make it have a bit of a deeper tone? (what I want)
035577 1 year ago
How much did this setup cost? I just got a 2010 Fusion V6 and this sounds awesome.
highlanderhybrid 2 years ago
Look up on ebay "Magnaflow Muffler Street 14"x5"x8" Universal Fit 14832"..
dliniypasha 2 years ago
can u try to put this same exhaust on an I4???
mojake08 2 years ago
you could, but why would you? it would sound like ass... the different in back pressure between a V6 and an I4 is huge...
dliniypasha 2 years ago
@dliniypasha could you put this on a 04 taurus with a vulcan
fordfanitic02 2 years ago
wouldnt know.
dliniypasha 2 years ago
which magnaflow do you have on there?
robbyrlnrln91 2 years ago
i like that it doesnt sound like a rice burner.
northsiderollers 2 years ago
is this the magnaflow you find on the steeda website?
DarkNightMilan 3 years ago
Yes
dliniypasha 3 years ago
@dliniypasha ohhh good stuff i always liked the sound stock but it was just too quiet
yellowcow13 1 year ago
it sounds awesome! haha i also have a ford fusion v6 and i was planing to change the exhaust for a magnaflow wich model is this one? thanks!
luis919126 3 years ago
Hey I also have a V-6 and was wondering if you have used or know anyone who has used an intake resonator delete and or a steeda cold air intake. If you do how did you feel the performance of your car. I have had a fusion for a year now and am trying to keep the new car feeling by trying some new things. Anything you recommend?
bigstah 3 years ago
sounds nasty im thinking about getting one this summer. do you have the 4cyl or the 6?
Stangfan88 4 years ago
i had the V6 model. I wasn't too pleased with the un-removable rev limiter.
dliniypasha 4 years ago
soundz nice.. if u dont mind me asking, how much gas do u spend daily on yurr fusion? im looking for a car with great gas mileages
myany 4 years ago
lets see, I currently have the Steeda CAI, Magnaflow Exhaust, and X-CAl2 Programming Chip... with a light foot on the gas I'm averaging 28mpg... and a heavy foot on the gas I'm averaging 20mph... depends on how you drive...
dliniypasha 4 years ago