You should no that the mini size battery you show in the video fits into the compartment just fine; all you need to do is make sure the fuse holder is down to the side within the guards, and same with the connector but on the other side, then the battery sits firmly on top.
Also to those that were curious, the gun chrono's at about 420 fps
the reason there is no left handed fire selector is because it is an exact replica. on the actual m4, if you are left handed and open fire, very hot bullet casings go right into your eye. fun fun fun. not offensive or anything, just fyi..
the "gas release" is called the foreward assist on real m4 and m16.
the flash hider is really called the flash suppressor. It all helps with debris dispersion on actual m4 and m16s. without it everytime you fire, a big dust ball would form around the front of your weapon revealing your position.
@downhillrider199 Yeah. Because of US Regulations for importation, all Airsoft guns must include a red/orange flash hider with the gun. But, once you get the gun you can switch it off for a black flash hider, silencer, etc. It's all just to adhere to importation laws.
@downhillrider199 also i know that in the state of California, they require the orange tip to be glued on, but it is not always used with strong glue...
@downhillrider199 Relax, dude. in England, 50% of the gun has to be bright neon green to be legal. Fortunately, I don't live in England :). If you don't like the orange tip, get an aftermarket flash hider.
@downhillrider199 Because, you can own an assault rifle in usa, that's okay. But airsoft guns are considered dangerous, because someone might rob a bank with one instead of a real gun.
@Laofse No it's because cops have shot kids because kids decide to be dumbasses and look like they are aiming airsoft guns at them. If your a cop and you see a 19 year old kid aiming an M4 at you on the street from a distance, your trained to act like he is about to shoot you...
It's not called a gas realease, it's a spring release; when you push it in it releases the tension that has built up on the spring from usage. If you don't, the spring will lose it's springyness and the FPS will lower over time...
Just to clearify it's not called a spring release either, unless it's a G&G. But in real life it's called the foreward assist. On the real M4 it's used to force the bolt foreward and cycle the jammed round out of the guns chamber.
Hey kids. THIS is how it's done. The five and the pound. Or double dap and the pound. You late teen / early 20 somethings say "tight" like it's still 1998, so quit with the half assed greetings. Anyone who doesn't end it with a pound should get the fist they leave hangin to the quarter pound
this is a sick gin. i have had mine custome painted, i put a laser on it, a noob tube, a flash light, a red dot scope, clipped together 2 mags, i got my freind to do a 3 rd burst modd, silencer, and to top it all off its BLOWBACK. hell ya. it cost me over 500 but it was worth it.
In the beginning when you were shooting the S-System with a Paintball mask on, can you see your sights well even with a mask on? Where I live a mask is a requirement, and I'd like to see my sights :P
part at 3:47 is NOT a gas release. It's called a "forward assist", it's used to help push the bolt forward incase it doesn't go all the way forward for whatever reason.
That tool that you thought wasn't supposed to be in there is actually the tool for the front flip-up sight. You match up the 4 little things that stick out of the tool in the 4 little holes on the front sight then turn and depending at which direction you turn it'll go up or down. So you can sight the gun's iron sight/flip-up sights in. I don't own this gun, but that's how it is on my AR-15 ha :P Nice gun btw.
bullshit XD Probably the owner fired 200k rounds out of it already and thinks it will break soon but tests done on Kwa m4s prove that after 210k rounds running on a m140 spring the gears show very little wear and the pinion gear with no wear! But the ani-reversal latch had a little more wear but was still in great shape and the gears required 1 shim. Kwa gears don't come with shims since their gears are so elite!!!!!!!!!!!!
whats up with the trigger guard comin off!??!? mine does that too! and i dont understand! i sold this gun, but i plan on buying another one. nice review btw.
It's supposed to come off i think for people who have really big hands or are wearing gloves, but if yours keeps coming off by accident i think it could be because a part is missing??
you can buy a JG one for like 150.00 at aisoftmegastore
M4A12010 2 weeks ago
This or sr10
gobldegook100 1 month ago
Do these flip up sights have a certain name to them?
NeonVars 1 month ago
The little plastic gas release is the forward assist on real firearms it releases the spring tension
lnpk2448 8 months ago
Would you recommend buying this? Im getting a new gun cus my other one broke. So is this shit good or do you recommend anything else?
snoken90powerkiing 8 months ago
u dont need a lipo for this. the ROF is still crazy
pwbaseball260 9 months ago
does it work with magpul p mags (hi cap)?
0mgwtfbbq21 1 year ago
Gas Release? Ehhh... Forward Assist? sorry, not trying to be an asshole or anything.
xx76rockstar76xx 1 year ago
75$ more it 25 wer i am
joeybTV1 1 year ago
You should no that the mini size battery you show in the video fits into the compartment just fine; all you need to do is make sure the fuse holder is down to the side within the guards, and same with the connector but on the other side, then the battery sits firmly on top.
Also to those that were curious, the gun chrono's at about 420 fps
faydeify 1 year ago
that's a fucking forward assist not a gas release.
Spetznaz666 1 year ago
@Spetznaz666 what is it for? On 'real-steel' firearms. Genuine question.
fearthegeeklord 1 year ago
@fearthegeeklord If the bolt dosnt push the cartridge all the way in you use the forward assist to manually feed it in.
Spetznaz666 1 year ago
eek, sounds like its trying to whine apart
fanofCOH 1 year ago
the reason there is no left handed fire selector is because it is an exact replica. on the actual m4, if you are left handed and open fire, very hot bullet casings go right into your eye. fun fun fun. not offensive or anything, just fyi..
ilovetogame 1 year ago 6
forward assist (the name of that button on the right side of the gun)
ddogspinmaster 1 year ago
ur spring came off is what happenned to ur flip up sight
TheLordoffail 1 year ago
dude not lying i fucking love manulaes, not kidding fuck thats probably one of the only reasons why i might not buy this gun, FUCK.
komplex71 1 year ago
the "gas release" is called the foreward assist on real m4 and m16.
the flash hider is really called the flash suppressor. It all helps with debris dispersion on actual m4 and m16s. without it everytime you fire, a big dust ball would form around the front of your weapon revealing your position.
not trying to be an ass, just fyi.
PAPICHULO02007 1 year ago
how much fps does this gun have right out of the box?
incubus9000 1 year ago
can you fit a lare 9.6 in this thing
Xvinova 1 year ago
@Xvinova no way.
roberto376 1 year ago
hey nice helmet, what kind is it?
SuperDwang 2 years ago
m4 M of motherfucker IoI
Buditokid 2 years ago
@Buditokid
TAYCATzZz 1 month ago
why do all airsoft guns in the states have a orange tip? its hidious
downhillrider199 2 years ago 8
@downhillrider199 Yeah. Because of US Regulations for importation, all Airsoft guns must include a red/orange flash hider with the gun. But, once you get the gun you can switch it off for a black flash hider, silencer, etc. It's all just to adhere to importation laws.
Alexr197 2 years ago
@downhillrider199 also i know that in the state of California, they require the orange tip to be glued on, but it is not always used with strong glue...
KINXtheELITE 2 years ago
i know its like they know were going to take it of
slipknotfanalex21 1 year ago
@downhillrider199 Relax, dude. in England, 50% of the gun has to be bright neon green to be legal. Fortunately, I don't live in England :). If you don't like the orange tip, get an aftermarket flash hider.
LWRCftw 1 year ago
@downhillrider199 Because other wise it's considered an real gun. Once you get the gun you can remove the ornage tip.
airsoftfanatic1456 1 year ago
@downhillrider199 its a law
5spartan1177 1 year ago
@downhillrider199 well airsoft guns are pretty realistic...
Gtaivownz 1 year ago
@downhillrider199 it's a legal requirement, they can take it off but....
Nariekxyz 1 year ago
@downhillrider199 so our idiot cops dont think theyre real and other shit like that, you can take em off though
Akalack 1 year ago
@downhillrider199 so people dont think your killing people.
Epiic4Liife 1 year ago
@downhillrider199 Because, you can own an assault rifle in usa, that's okay. But airsoft guns are considered dangerous, because someone might rob a bank with one instead of a real gun.
Laofse 1 year ago
@Laofse No it's because cops have shot kids because kids decide to be dumbasses and look like they are aiming airsoft guns at them. If your a cop and you see a 19 year old kid aiming an M4 at you on the street from a distance, your trained to act like he is about to shoot you...
airsoft3321 6 months ago
@downhillrider199 for safty reasons
beastly789100 8 months ago
It's not called a gas realease, it's a spring release; when you push it in it releases the tension that has built up on the spring from usage. If you don't, the spring will lose it's springyness and the FPS will lower over time...
Nariekxyz 2 years ago
Just to clearify it's not called a spring release either, unless it's a G&G. But in real life it's called the foreward assist. On the real M4 it's used to force the bolt foreward and cycle the jammed round out of the guns chamber.
superzero2009 2 years ago
@superzero2009 oh, I thought you were talking about airsoft, guess im too used to having a G&G lol
Nariekxyz 2 years ago
It's okay everyone has their moments, but i'll give you props for owning a G&G. Those guns are amazing for the price they are. ;)
superzero2009 2 years ago
@superzero2009 haha, yeah they are good quality, had the m4 blowback edition, wanted to get this aswell, I love
M4's!
Nariekxyz 2 years ago
This has been flagged as spam show
Hey kids. THIS is how it's done. The five and the pound. Or double dap and the pound. You late teen / early 20 somethings say "tight" like it's still 1998, so quit with the half assed greetings. Anyone who doesn't end it with a pound should get the fist they leave hangin to the quarter pound
AdidasBoy711 2 years ago
this is a sick gin. i have had mine custome painted, i put a laser on it, a noob tube, a flash light, a red dot scope, clipped together 2 mags, i got my freind to do a 3 rd burst modd, silencer, and to top it all off its BLOWBACK. hell ya. it cost me over 500 but it was worth it.
slipknotfanalex21 2 years ago
Btw, do you live in Hawaii? You have a local accent hehe
Alexr197 2 years ago
In the beginning when you were shooting the S-System with a Paintball mask on, can you see your sights well even with a mask on? Where I live a mask is a requirement, and I'd like to see my sights :P
Alexr197 2 years ago
u must of get one bad one cuz mine
is good
Accuracys808 2 years ago
so is this a gas or electric because there is a gas relise but you are talking about batterys
nevno1 2 years ago
@nevno1 It's electric. All these M4's always have a mock gas tube.
Alexr197 2 years ago
This comment has received too many negative votes show
ur such a dirty mexican
iSPITyoFACE 2 years ago
@iSPITyoFACE Im pretty sure these guys live in Hawaii
TBA8o8 2 years ago
@iSPITyoFACE He looks more Filipino than Mexican.
Alexr197 2 years ago
you should put a 11.1 V LI PO battery in the gun to give it a much better fps and bpm. this gun is really good
peterzzmm 2 years ago
the size of the battery does not increase the fps. It only increases the rate of fire.
wcomedy 2 years ago
Yeah and if you put a new sling on the gun it increases rpm too......
BriMan907 2 years ago
The grip on my KM4A1 is sharp too, as well as the bottom part of the trigger guard. I'm definately getting gloves xD.
Christianmarquez 2 years ago
can you take the whole outter barrel off?
fooj22 2 years ago
part at 3:47 is NOT a gas release. It's called a "forward assist", it's used to help push the bolt forward incase it doesn't go all the way forward for whatever reason.
UBCSWraith 2 years ago
cause m4's jam easily
fooj22 2 years ago
For the battery to fit you need a LiPo its tight but it does fit
ivantheterror 2 years ago
i just bought my kwa km4a1 carbine
W0ODSMAN 2 years ago
gas release.....................LOL!!!!
Dundeeman14 2 years ago
That tool that you thought wasn't supposed to be in there is actually the tool for the front flip-up sight. You match up the 4 little things that stick out of the tool in the 4 little holes on the front sight then turn and depending at which direction you turn it'll go up or down. So you can sight the gun's iron sight/flip-up sights in. I don't own this gun, but that's how it is on my AR-15 ha :P Nice gun btw.
XemnasFTW 2 years ago
Oh thanks for the info!
HIReviews 2 years ago
@HIReviews The grip is very good quality, but to you feels awkward. don't call it bad cos its made of polymer
looperterd 1 year ago
is the body full metal
AlbertoMuse 2 years ago
Pretty much
HIReviews 2 years ago
Hey I saw a kwa m4 that costs $140.
DeAthZReApEr760 2 years ago
I recommend it, kwa is one of the best airsoft companies out there
HIReviews 2 years ago
K cool.
Thanks.
DeAthZReApEr760 2 years ago
bullshit XD Probably the owner fired 200k rounds out of it already and thinks it will break soon but tests done on Kwa m4s prove that after 210k rounds running on a m140 spring the gears show very little wear and the pinion gear with no wear! But the ani-reversal latch had a little more wear but was still in great shape and the gears required 1 shim. Kwa gears don't come with shims since their gears are so elite!!!!!!!!!!!!
DeltaWinters88 2 years ago
whats up with the trigger guard comin off!??!? mine does that too! and i dont understand! i sold this gun, but i plan on buying another one. nice review btw.
DylanLosasso 2 years ago
It's supposed to come off i think for people who have really big hands or are wearing gloves, but if yours keeps coming off by accident i think it could be because a part is missing??
HIReviews 2 years ago
well u have to pull on it a bit... a very tiny bit! but like i said i dont own it anymore, but im def gunna buy another one.
DylanLosasso 2 years ago
and that tool that you said is not to be in the box is to adgust the front sight
tv321123 2 years ago
oh alright thanks for letting me know
HIReviews 2 years ago
good review i just got this gun and it is great
tv321123 2 years ago