@matyc13 Nope, it is too heavy. It has enough power to push itself forward on a skateboard. You can buy plans on Ebay to build a proper small turbine engine.
what are you using to inject the propane? i am getting material together to build one, and i was planning on using a nitrous injector to give a nice spray.
@jtugwell I use a vaporizer, it is a open metal pipe without a injector that goes down and back up the combustion, you don't need fancy stuff if you are using a gas. don't kill yourself, this is very dangerous.
@ferrobutcher He needed the turbo to makeup the compressor portion of the Turbine engine. That is the hardest part to manufacture yourself, so why not use something that is readily available that has it built in? Basically A Turbine engine is nothing more than two turbo chargers with a combustion chamber in the middle.
even if you don't like this, don't dislike because someone worked a lot to make this engine...to press a button isn't as hard as making something like this..
@THEFLIGHTGUY If you use two large light weight RC turbine engine it will probably work. Just keep in mind that they are like small hand grenades when the turbine cracks.
@chamblizi I just understand these things so it was easy for me to build one, it is not very powerful, if you want to build one for a go cart, try to buy some plans on ebay for a proper turbine.
very nice setup!! so is the fuel being sucked in through the intake? please let me know and i would like all the info u have on yer build if thats alright. mainly combustion chamber and what u use for an oil pump.
@ak7wyf That is not the fuel, that is hit oil vapor from the oil tank. The oil pump is a 12 volt drill that turns a power steering pump. the 12 volt drill is set at 100% speed, the pressure is regulated via a bypass valve. the combustion chamber takes some explaining.
@ChrisBence Sure, the turbo uses oil bearings, they have no moving parts, the shaft basically glides on a layer of oil. The seal between the shaft and the turbine leaks, (all turbos do) but it leaks inwards, because it is only the center or the bearings where the pressure is high and the pressure from the turbine gas is higher, so where the hot gas comes in contact with the oil, it makes this vapor. It goes into the oil tank and then out of the breather pipe, and that is that.
@Musse1231 yes you could, however the weight would kill the idea, you would have to strip this to the bare bone. all aircraft turbines are thin .020 to .040 wall titanium tubes...now i could see one of these on a go kart with a set of wings maby
So the basics are the same and it would produce good thrust but the engine would be to heavy to fly. I'm thinking if one of these engines can compare to the TRS-18 or TR 3?
I would use inconel if you can.. It's one of the more expensive metals out there.. but to give you an idea, if NASA used stainless steel for their turbines, it would last 2-3 seconds. Inconel lasts 15-20 seconds. A 12x12x6 block will run you around 4000 to 5000 thousand dollars.
Only use stainless steel, the first time is expensive because you will find yourself rebuilding everything. you can build one ranging from 300 to 2000 USD depending on what you already have and how good you are. I am building a new one, the objective is to make it simple cheap and reliable. it will be up within 6 months.
awesome built man 5 stars!!!but imagine if this all would have to be done on big jet airlaner engines lol !!! like Josh we need to start the engines,take the leaf blower and power it up!!!
Thanks man, The starting process in jet engines is basically the same. First they spool up the turbine, then they hit the ignition switch (spark plug) and then they inject fuel. the thing that makes this jet engine useless is the fact that it was designed to be a turbo, not a jet, it is heavy, it needs a oil pump, coil, oil tank, oil cooler. If you eliminate the oil system and unnecessary weight you will have a proper jet engine.
Actually, that's what they do if the remote start sequence fails. It's just not a leaf blower but more like a high pressure compressor... The principle is the same, believe it or not...
nice
rickyeguizabal 4 months ago
nice engine i like it and i will make one.birdboy they attach a vacuum because they need to cool it down
encho9631 4 months ago
why do you have a vacuum attached to it and then you take it off ??>
birdboy10 5 months ago
@birdboy10 It is not a vacuum, it is a blower, it is to start the turbine.
rainerfilm 5 months ago
i think this is really cool , but i ive got a question , with the weight of the entire unit could u attach it to something and actually propel it?
matyc13 5 months ago
@matyc13 Nope, it is too heavy. It has enough power to push itself forward on a skateboard. You can buy plans on Ebay to build a proper small turbine engine.
rainerfilm 5 months ago
i jujst a turbo nothing especial..
rocanroller85 5 months ago
@rocanroller85 Can you say that in English?
rainerfilm 5 months ago
i said this is only .. one holset turbo nothing special.. everybody can do that..
rocanroller85 5 months ago
@rocanroller85 I would love to see you try. Please make a video and show me that you are not a all talk but can't do person.
rainerfilm 5 months ago
I can't stop laughing at the first part! It looks like he's putting his fucking dick into the engine
appleintosh 6 months ago 5
@appleintosh
haha!!! i laughing my shit out!
NickiLasse 2 months ago
great
barthynour 6 months ago
ooh my 1st thought was he is putting a dildo in it well tht just me :P
huziii 6 months ago 2
what are you using to inject the propane? i am getting material together to build one, and i was planning on using a nitrous injector to give a nice spray.
jtugwell 7 months ago
@jtugwell I use a vaporizer, it is a open metal pipe without a injector that goes down and back up the combustion, you don't need fancy stuff if you are using a gas. don't kill yourself, this is very dangerous.
rainerfilm 7 months ago
just one question how does the oil pump work
90XaSeR09 7 months ago
@90XaSeR09 it is a power steering pump driven by a 12 v drill motor, the outlet pipe has a bypass valve to regulate the oil pressure.
rainerfilm 7 months ago
@rainerfilm k thanks
90XaSeR09 7 months ago
Comment removed
90XaSeR09 7 months ago
When this baby hits 88 MPH your going to see some serious shit...!
fattony123082 7 months ago 3
@fattony123082 ? If what hits 88 MPH?
rainerfilm 7 months ago
@rainerfilm Back to the future reference
iSim0641 7 months ago
you fail at life
ninja6kid 7 months ago
@ninja6kid Famous last words, I cant wait to see the expression on your face when reality slaps you in the face.
rainerfilm 7 months ago
@ninja6kid He means that it's just an engine, not a car
158158cow 7 months ago
can u explain to me how u built it step by step? also principle involved? I will like to make one.
frank2ethyl 7 months ago
@frank2ethyl Step 1, learn how a jet engine works and why it works. use the internet.
Step 2, use your knowledge to buy the parts that you need.
If you can successful complete these 2 steps on your own you will most likely be able to build one, if not, stay far away from jet engines.
rainerfilm 7 months ago
in the begining it looked like u were puting a dick in a turbocharger lol
shameful911 7 months ago
This has been flagged as spam show
@shameful911 ppl who talk about there penis have small dicks
flipper2562 7 months ago
Aren't you afraid it might explode? =\
TheCrazyFinn 7 months ago
From my point & view the part from 00:00-00:18 looked like a huge boner growing and being slid into a so call vagina
hondacl0n3 8 months ago
Have you ever put your hand near the intake? How much suction does an engine like this create?
sluggs10289 8 months ago
it looks more like a turbocharger than a jet engine. but its cool tho.
ferrobutcher 8 months ago
@ferrobutcher it is a turbo charger conversion jet.
rainerfilm 8 months ago
@ferrobutcher He needed the turbo to makeup the compressor portion of the Turbine engine. That is the hardest part to manufacture yourself, so why not use something that is readily available that has it built in? Basically A Turbine engine is nothing more than two turbo chargers with a combustion chamber in the middle.
bkpickell 6 hours ago
throwing the oil gases in the compressor is not something you should do.all the stuff sitting in the compressor blades reduces compressor efficiency
flaps20check 8 months ago
buenos videos de turbos
korn744 9 months ago
even if you don't like this, don't dislike because someone worked a lot to make this engine...to press a button isn't as hard as making something like this..
MbLancer1 10 months ago
And soo? Y que ? Que pretendes que ases para que sirve le metes aire al Caracol de escape y succiona el de admicion yyyy????
cristiancazador 10 months ago
say it was sucking bong smoke. would it affect its performance?
tradward 10 months ago
what the hell does it do? it just sits there and make noise and occasionally there's a yellow hose put to its intake
fyttirackarn 11 months ago
i wanna make six and put them on a manned glider
THEFLIGHTGUY 1 year ago
@THEFLIGHTGUY If you use two large light weight RC turbine engine it will probably work. Just keep in mind that they are like small hand grenades when the turbine cracks.
rainerfilm 8 months ago
gay
TheRealColtMaster 1 year ago
first off how did you build this and how can i do it for a gokart
chamblizi 1 year ago 10
@chamblizi I just understand these things so it was easy for me to build one, it is not very powerful, if you want to build one for a go cart, try to buy some plans on ebay for a proper turbine.
rainerfilm 1 year ago 2
You mean a volvo engine...
xxbatman94xx 1 year ago
@xxbatman94xx ??? I have no idea why you say that?
rainerfilm 1 year ago
very nice setup!! so is the fuel being sucked in through the intake? please let me know and i would like all the info u have on yer build if thats alright. mainly combustion chamber and what u use for an oil pump.
ak7wyf 1 year ago
@ak7wyf That is not the fuel, that is hit oil vapor from the oil tank. The oil pump is a 12 volt drill that turns a power steering pump. the 12 volt drill is set at 100% speed, the pressure is regulated via a bypass valve. the combustion chamber takes some explaining.
rainerfilm 1 year ago
You sir are a GENIUS!!! I am impressed that you could fabricate something like that.
Dustin92780 1 year ago
can you put it in some junk old car and then blast past everyone?
bluemoondiadochi 1 year ago
@bluemoondiadochi No, but it makes one hell of a hair dyer.
rainerfilm 1 year ago
i can now smoke weed at home and not get cought just blow into it :D
J0SEKILLSU 1 year ago
hey now i push out the pesky neighbors cat with this blower lol
banzuki1275 1 year ago
This has been flagged as spam show
is this kid new to the planet haha wtf yeees its a turbo meathead shit i seen shit like that demo'd at the dragways about 10 years ago lol
Kingvideo10 1 year ago
This has been flagged as spam show
is this kid new to the planet haha wtf yeees its a turbo meathead shit i seen shit like that demo'd at the dragways about 10 years ago lol
Kingvideo10 1 year ago
is this kid new to the planet haha wtf yeees its a turbo meathead shit i seen shit like that demo'd at the dragways about 10 years ago lol
Kingvideo10 1 year ago
And the point is?
element2310 1 year ago
@element2310 I left a comment on your stupid bike rat video.
rainerfilm 1 year ago 14
@rainerfilm lol dude
daniltv1 1 year ago
gota love vacums
Epsilon3G 1 year ago
Could this be jetpack :P
vanjastanic 1 year ago
how come you cant use a direct injet fuel, Because you have your fuel spitting out of a tuve instead of direct inject.
snk9045 1 year ago
What are you doing putting a giant dildo into a jet engine.
faffaflunkie 1 year ago
industrial leaf blower lol
pasionbass 1 year ago
so what is this for? what can u do with it?
TTCro 1 year ago
whats the smoke going in the intake for?
rcfreak2493 1 year ago
@rcfreak2493 read my previous comment.
rainerfilm 1 year ago
@rainerfilm yeah i realized what it was after watching the video some more. good work! how much thrust is it producing?
rcfreak2493 1 year ago
@rcfreak2493 I am not sure, 7 kg.
rainerfilm 1 year ago
Hey can you explain what that vapor stream is that is being pulled into the compressor?
ChrisBence 1 year ago
@ChrisBence Sure, the turbo uses oil bearings, they have no moving parts, the shaft basically glides on a layer of oil. The seal between the shaft and the turbine leaks, (all turbos do) but it leaks inwards, because it is only the center or the bearings where the pressure is high and the pressure from the turbine gas is higher, so where the hot gas comes in contact with the oil, it makes this vapor. It goes into the oil tank and then out of the breather pipe, and that is that.
rainerfilm 1 year ago
lol gives me an idea of making a turbo bong XD
fr4nC1z 1 year ago
That is awsome
louisewat 1 year ago
you spent to much for a hoover
gabitzuboss1 1 year ago
he bananadude your right mate, after reading you rcomment i pissed my pens as well.
damm that was funny.
evdperk 1 year ago
This has been flagged as spam show
can you tell me how make a turbine like yours? and components? send to my mail driftingv6@hotmail.com
wwwdeelocke 1 year ago
what was the gauge at 0:57 measuring?
CDFfilms 1 year ago
Is that just a basic Garrett T3 or something?
quinnmyster 1 year ago
@nicolasjmaster and your video of a stupid little robot shows that you HAVE a life?
westpsmity 1 year ago
this just looks like a big turbo that is self propelled?
ws6kid404 1 year ago
You have got to get your hands out of there... jesus
twistedbydsign99 1 year ago
nice!
sasop117 1 year ago
have you tryed water injection, it boosts them by 50%
snowman3514 1 year ago
@snowman3514 I tried but I did something wrong somewhere, it did not work.
rainerfilm 1 year ago
@rainerfilm
really? so what did it splatter and stop or just no boost created?
i guess its all in the water mix, did you mix it with 25% alcohol?
cya
snowman3514 1 year ago
@snowman3514 NO, i did not, I had no idea how it worked, my setup is all wrong.
rainerfilm 1 year ago
Comment removed
snowman3514 1 year ago
Hey that looks like a turbo charger......
rico002i 1 year ago
@rico002i it IS a turbocharger. LOL
magnum9987 1 year ago
@rico002i
Turbo-power is based on jet-technology. That's why he uses a turbocharger for his jet-engine. It has the fans for the compression, just like a jet.
BMW is the God of jet- and turbocharging technology!
ChromatopelmaDude 1 year ago
@rico002i you know why it looks like one? cuz it is one u stupid fuck
VicJLo 1 year ago
Please send the video of when this thing explodes!
Atticus450R 1 year ago 6
turbo?
blizzard249 1 year ago
diesel driven vacume cleaner?
itchy8me 1 year ago 25
@itchy8me no diesel involved.
ak7wyf 1 year ago
This has been flagged as spam show
i call bullshit. wheres the thrust? Its not an engine its a turbine that sounds like an engine
jessejames7777 2 years ago
You stupid cunt, that was never the idea to have lots of thrust. It still makes one hell of a noise.
rainerfilm 2 years ago
@rainerfilm LMAO HAHAHAHAHA OK W/E
jessejames7777 1 year ago
@rainerfilm what ignites the fuel going in there?
davidzzz94 1 year ago
obviously you don't know anything about jet engines, so keep your stupidity to yourself.
FisandCram 1 year ago
That looks dangerous
drbackjack 2 years ago
how stable is this engine will it blow up when use
thebrian266 2 years ago
Now can you install such an engine in a aircraft and make it work?
Musse1231 2 years ago
@Musse1231 yes you could, however the weight would kill the idea, you would have to strip this to the bare bone. all aircraft turbines are thin .020 to .040 wall titanium tubes...now i could see one of these on a go kart with a set of wings maby
hazmat440 2 years ago 3
So the basics are the same and it would produce good thrust but the engine would be to heavy to fly. I'm thinking if one of these engines can compare to the TRS-18 or TR 3?
Musse1231 2 years ago
it's got to be the " e=mc2.....dammm...
xsinlite 2 years ago
I don't know how it works, but it looks cool.
lemonzawodowiec 2 years ago 7
I would use inconel if you can.. It's one of the more expensive metals out there.. but to give you an idea, if NASA used stainless steel for their turbines, it would last 2-3 seconds. Inconel lasts 15-20 seconds. A 12x12x6 block will run you around 4000 to 5000 thousand dollars.
KickAssCorporation 2 years ago
is that in inches?
12x12x6 inches?
weetnietgeen 2 years ago
what material do you use for the combustion chamber? and how much does it usually cost to build a turbojet? approx. -thanks
grjsb13 2 years ago
Only use stainless steel, the first time is expensive because you will find yourself rebuilding everything. you can build one ranging from 300 to 2000 USD depending on what you already have and how good you are. I am building a new one, the objective is to make it simple cheap and reliable. it will be up within 6 months.
rainerfilm 2 years ago
the sound is like gta sa if you are in a jet
Mapimaholland 2 years ago
Watch the background. The shadows move like it was 4 hours.
laquer1rules 2 years ago
That's called heat.
enice482 2 years ago
at 0:39 it looks like a face
youtheotube2 2 years ago 6
hand shake looks like your crapping yourself
colscols 2 years ago
What is the smoke it is sucking in?
CoolerThanAllBeanz93 2 years ago
hot oil gas.
rainerfilm 2 years ago
wow 2:13 was the funnest part ever jk
lilyillow 2 years ago
I pissed my pants laughing, at 0:09 it looks like you are shoving your cock into the engine...............nice video!!!!!!!!
TheBananaDude1 2 years ago 144
@TheBananaDude1 ... Man you are totally right :D
ventiti 2 years ago
@TheBananaDude1 omg that was hilarious
dominicanto17dr 2 years ago
@TheBananaDude1 good point haha ,
gussoboy 1 year ago
@TheBananaDude1 Rofl it does too XD
AnarchyEngineer 1 year ago
@TheBananaDude1 hahaha all slow and cautious
ephidapoon 1 year ago
@TheBananaDude1 AHAHAH XDXDXDXD
Astartas 1 year ago
@TheBananaDude1 Hahahahahahaha
cxbra 1 year ago
@TheBananaDude1 LMFAO like on family guy when peter decides to explore stickin his stuff in things lol
lilwildmike1 1 year ago
@TheBananaDude1 that made my day!! i allmmoast died watching!!
plavins1 1 year ago
@TheBananaDude1 HAHA!!
ArniieeCDJ 9 months ago
what is that......a garett T5 turbo?
THINKgreen3331 2 years ago
It is some garret turbo from a Mercedes diesel.
rainerfilm 2 years ago
@rainerfilm is that thing sucking wood gas @ the end?
yadidimeanmaine 2 years ago
What is wood gas?
rainerfilm 2 years ago
@rainerfilm Wood gas is a type of fuel used from heating wood to release the gasses......
madjimms 2 years ago
I believe that's smoke from the hot oil in the catch tank, coming through the breather
Casowsky 2 years ago
Nice same sort of lay out as my jet you mind adding me as a video response
JoelHarvey1 2 years ago
Go ahead, no problem.
rainerfilm 2 years ago
That is just cool man!!!
natvic76 2 years ago
awesome
waqas10 2 years ago
hows that fo a science project holy shit
BruceCountyFinest 2 years ago
i want one for my bicycle
nasty6uldv8 2 years ago
Comment removed
ijacobs333 2 years ago
What is the mist/smoke going into the engine???
dlmarti 2 years ago
hot oil vapor from the oil tank.
rainerfilm 2 years ago
the high pitches hurt my ears.... lol
i hope it does not blow up on you :(
Jakathera 2 years ago
how much thrust per say does this put out?
amnlarson 2 years ago
about 5 kg, just remember, the turbine itself is very small and the exhaust is to big.
rainerfilm 2 years ago
what is that used for ? why did you made that ? nice
diwash9612425 2 years ago
I making that thing for the toasting of marshmallow.
rainerfilm 2 years ago
@rainerfilm when lighting a match isnt enough...you gotta make a jet engine to toast marshmallow...*sigh*
MrRioMario 2 years ago
what did u use for fuel?
jaren345 2 years ago
LPG gas
rainerfilm 2 years ago
awesome built man 5 stars!!!but imagine if this all would have to be done on big jet airlaner engines lol !!! like Josh we need to start the engines,take the leaf blower and power it up!!!
plavins1 2 years ago
Thanks man, The starting process in jet engines is basically the same. First they spool up the turbine, then they hit the ignition switch (spark plug) and then they inject fuel. the thing that makes this jet engine useless is the fact that it was designed to be a turbo, not a jet, it is heavy, it needs a oil pump, coil, oil tank, oil cooler. If you eliminate the oil system and unnecessary weight you will have a proper jet engine.
rainerfilm 2 years ago
yeah i know how real jet engine works!!lol but yiurs is awesome but now it is useless junk!!!lolyou need to make it more lighter!!
plavins1 2 years ago
Actually, that's what they do if the remote start sequence fails. It's just not a leaf blower but more like a high pressure compressor... The principle is the same, believe it or not...
ATLRCFlyer 2 years ago
man thats strange and pretty barbaric!!!LOL
plavins1 2 years ago
LMAO UR JET ENGINE LOST HIS VIRGINITY
bl00dyscars 2 years ago
There is nothing that sucks and blows like a jet engine.
rainerfilm 2 years ago
rofl
bl00dyscars 2 years ago
NICE BONER
bl00dyscars 2 years ago
plans please....
please
robot797 2 years ago
Internet.
rainerfilm 2 years ago
lol i have to laugh everytime i see this, it does look like the jet engine is givin u boner lol good jet engine i no i cant build one of them
jkachur777 2 years ago
A PENIS
bl00dyscars 2 years ago
People say what goes on in their heads.
rainerfilm 2 years ago
not bad...
COVERSALL10 2 years ago
oh what a beautiful piece of machinery :) I like it!
hboy007 2 years ago
for a second i thought you were sticking you shlong into the turbo fins
jkachur777 2 years ago 6
lmfao hahahah
bmwmatt 2 years ago
If thats his shlong, then he's a friggin horse.
LabRat4680 2 years ago