you set timing with the engine at low rpm? and you disconnect the vacum advance also right? make sure all ports on carb are hooked up or plugged......just sayin....love the video thanks for the up-load
Your timing at the 1st and 2nd try is retarded...advance it. The main thing is that you better get the distance correct on the starter and the flywheel or you will be replacing the flywheel. The sound it is making is the sound of the starter gear and the ring gear being too far apart. Do a GOOGLE search for MotorsbyShooter...contact me there and I will help you with the Hemi. BTW...35* on a stock motor is way too much...you will hurt the motor.
Learn to "static time" look up old VW beetle. Bump/ wrench engine, watch both no1 valves closed, or (on hemi) poke rubber tip / compression ga. into no1, bump until compression starts, wrench 'til marks come up about 10BTC. Drop in dist, rotor pointing to no1 tower, rotate dist CCW (retard), then back CW (advance) until points open/ spark at coil/ reluctor lined up. Easy. starts right up
when you put the engine together you have 1 at TDC and when you put the dizzy on you set the advance without the cap on by measuring the angle between the mark on the dizzy and the rotor, saves all this trouble.
It kills me to watch an engine not ready to start. It takes its toll on the engine and the owner. Its not that difficult to get it right BEFORE you start it up. See an old timer before attempting this kids-Dvorak
you set timing with the engine at low rpm? and you disconnect the vacum advance also right? make sure all ports on carb are hooked up or plugged......just sayin....love the video thanks for the up-load
ezzzstang1 6 months ago
Well done! You guys know your stuff. Good job!
DRJIVAN 7 months ago
my fav part was the fire ball, never seen an engine do that before
bladeslash4 10 months ago
@bladeslash4
Google 'another start attempt' on youtube, tlfrantz1 for a good fireball. Almost did a fireball in my pants.
tlfrantz1
tlfrantz1 1 month ago
Your timing at the 1st and 2nd try is retarded...advance it. The main thing is that you better get the distance correct on the starter and the flywheel or you will be replacing the flywheel. The sound it is making is the sound of the starter gear and the ring gear being too far apart. Do a GOOGLE search for MotorsbyShooter...contact me there and I will help you with the Hemi. BTW...35* on a stock motor is way too much...you will hurt the motor.
shooteraod 11 months ago
man love the color on that car and i would die for that car lucky man hope u take good care of it
neon834 1 year ago
reminds me of firing my 440 the other day turned out we had the dist in wrong
bigblockbryan1982 1 year ago
@bigblockbryan1982 your fault
YungJosh50 1 year ago 4
front fired! 6:26
corvettels9 1 year ago
Comment removed
corvettels9 1 year ago
Learn to "static time" look up old VW beetle. Bump/ wrench engine, watch both no1 valves closed, or (on hemi) poke rubber tip / compression ga. into no1, bump until compression starts, wrench 'til marks come up about 10BTC. Drop in dist, rotor pointing to no1 tower, rotate dist CCW (retard), then back CW (advance) until points open/ spark at coil/ reluctor lined up. Easy. starts right up
fourfortyroadrunner 1 year ago
when you put the engine together you have 1 at TDC and when you put the dizzy on you set the advance without the cap on by measuring the angle between the mark on the dizzy and the rotor, saves all this trouble.
PansyFeet 1 year ago
nice sound
bobseregon 1 year ago
she sounds sexy :)
ak47killer200 1 year ago
nice sound
krystyan86 1 year ago
1970 plymouth road runner, sweet.
tinymanthebeast 1 year ago
Where is Al Crisenbaulm when you need him ?
ffmak124x 1 year ago
it took 11 years to do this... but in Pimp my Ride it takes a week....
YourVideoFailed9 1 year ago
@YourVideoFailed9
Your Comment Failed!!!
RAJSTA81 1 year ago
reminds me of me and my freinds starign mine for the first time. Nice car, hop eit all goes well for you.
410horses 1 year ago
Swweeet!!!
Now that's music I like to hear!!
wakeeeboarder 2 years ago 6
right on.
BuddyMon29 2 years ago
AWESOME CAR!
Ian74263 2 years ago
lol i just put one of these on my go-kart
btw love your determination well done do you by anychance race at the S.I.R speed ring as your face seems familier?
Thanks
Dan
DanTParkour 2 years ago
It kills me to watch an engine not ready to start. It takes its toll on the engine and the owner. Its not that difficult to get it right BEFORE you start it up. See an old timer before attempting this kids-Dvorak
DVORAKMACHINE 2 years ago
what a beauty
undeadkennedys 2 years ago
let's see a vid of it driving & doing a burnout!
CraigsRodCustom 2 years ago
prety clean
BOBWEISER69 2 years ago
timing is everything :) nice hemi!
ruffypoo 3 years ago
legendary engine,lovely car
westcoastdodge 3 years ago