sorry for the post here but i am wondering if you could add a small amount of potasium hydroxide to the solution to see if you get any heating effect from the water as this would be a cold fussion reaction it would not be a large amount as this would change the water resistance and my stop its function.
you missed it vaporise the water then charge with frequency its way better you got the brains I got the string keep me updated someone said I reversed russia accelerated vacume bomb Fuck bp and haliburtion were ending oil.
Lid, I am starting to think that the rectification is just one part of what is going on here. the other part is the natural internal capacitance of the diode. However this has to be a very small capacitance to match the frequency of the SEC. May be this is where the leads of the diode come into play. They may be part of the circuit. Kind of a high frequency L C circuit. Where the diode is the C and the lead wire is the L. Due to the rectification, just one lead is "hot", the one with the gas.
Lid, What I am trying to say is, that the small capacitance in the diode that you are now using may be the actual receiver of the SEC and the one way effect of the diode is only secondary to the SEC receiving process causing the electrolysis on just one lead. The very small capacitor naturally in the diode which makes sense due to the high frequency of the SEC. I am starting to think that it is the natural very small capacitance of the diode that is really acting as the receiver here.
All diodes exhibit this phenomenon to some degree (capacitance), but specially made varactor diodes exploit the effect to boost the capacitance and variability range achieved - most diode fabrication attempts to achieve the opposite. Lid, I wonder what happens if you use a varactor in the water? These are capacitance based diodes. Since SEC seems to be capacitance based as a transmitter, may be a varactor might make a good receiver. Maybe the small capacitance in the diode is actually a receiver
Lid, I was thinking that a diode is really just a rectifier with leads attached. It is one lead that is producing the gas. I am not sure what the other lead is doing, if anything at all. I was thinking that the real action is happening inside the diode, the actual rectification. Selenium acts as a diode or rectifier internal to it's self also. Leads can be attached, or not. That is why I suggested using a Selenium and water mixture to (may be) produce the same gas as the diode.
Lid, Selenium was once widely used in rectifiers. These uses have mostly been replaced by silicon-based devices, or are in the process of being replaced. Selenium is used in photo cells also and Selenium powder for these cells is available. Each Selenium atom it seems, is it's own little rectifier.
Lid, what happens if you used distilled water and Selenium? Selenium acts like a diode, a rectifier. May be if you used Selenium like you get from the drug store vitamin shelf and made a mixture with water, you could create the gas with just the SEC field applied to the outside of the test tube, No diode required. Every Selenium atom in the water Selenium mixture would produce gas as it's own little rectifier. (may be) . A zillion Selenium atoms each producing gas. Might be worth a try,
Lid, I am not saying that the gas is not Hydrogen or Oxygen or a combination of both. But the gas should be captured in a balloon or other container, taken to a lab for testing to see what it really is. It may be the diode lead is breaking down in the water due to the SEC field. I hope it really is Oxygen and Hydrogen or at least Hydrogen and not something else. The diode must be doing something as the gas only comes from one lead. I would say there is rectification of the SEC field.
@slinky460 -----This really is electrolysis of water. What is of note here is the method. The fact that there is no direct link from the SEC exciter and the water.
Lid, nice replication of Dr Stifflers work. I wonder if small copper plate attached to the lead would increase the (what ever it is) gas production? The diode seems to cause rectification of the SEC to produce the gas from the water. Also I wonder if the metal in the diode leads have anything to do with the production of the gas? May be the metal is turning to a gas and not the water. If so, this may not be actual electrolysis of the water, Hydrogen and Oxygen. Anyway it is interesting.
please please try different metal at diferent spacing, in distilled water, see the distilled water is the most important part because in distilled water you maintain up to 1000 volts in a 1/2in lead spaceing without alot of drain,,,, so if you put disimilar metals into the situation with minimal distences the voltage is already in the water just need the different mineral to activate it. i used to burn copper anodes to make them blue, the blueing is actually like a insulator.= no gap in cell
@Lidmotor I was implying trying to say do other types on diodes that are availible to you there are two diodes types I am aware of those are germainium and silicon diodes. I mean is try something with different current ratings and voltage ratings to find the one that works just as good or if not better then the fast switching glass ones.
So why a diode? There is no connection to the diode except on the anode side. I expect your results would be similar with just a piece of wire as the diode does nothing special.
@valveman12 -----There is no connection to the diode at all. It is free floating in the water. There is only a capacitive link between the one wire coming out of the SEC and the diode. That is what makes this so strange. There is no direct connection to the water.
@rroge5 ----- I tried a carbon rod already and did not have much luck. You have to be careful that you don't setup a battery. The diode has to be able to do it's thing without interference. I found that if you add an electrolye enhancer like salt to the solution the effect stops. This doesn't seem to work like regular electrolysis.
@ProgressiveTV -----This method of electrolysis is brand new to me. It is the work of Dr. Stiffler. You can see his videos at MRH202 or visit his web site at Stiffler Scientific. My attempts to light the gas have been unsuccessful so far. I may need to set up a bubbler.
maybe you can nickle plate the wire instead of the tin coating.......the wire is steel, clean off the tin with sand paper, then use electrolisis to nickle plate it.......then it will last even in electrolite.......can i get a copy of this circuit when you have time.....not sure if you have posted it.....you got a lot of vidios.....dont think i seen em all
sorry for the post here but i am wondering if you could add a small amount of potasium hydroxide to the solution to see if you get any heating effect from the water as this would be a cold fussion reaction it would not be a large amount as this would change the water resistance and my stop its function.
geshbeddin 10 months ago
so how efficient is this???
if H2 is only coming out then the water has to change ph.
josephdupont 1 year ago
you missed it vaporise the water then charge with frequency its way better you got the brains I got the string keep me updated someone said I reversed russia accelerated vacume bomb Fuck bp and haliburtion were ending oil.
MrCletushowell 1 year ago
Lid, I am starting to think that the rectification is just one part of what is going on here. the other part is the natural internal capacitance of the diode. However this has to be a very small capacitance to match the frequency of the SEC. May be this is where the leads of the diode come into play. They may be part of the circuit. Kind of a high frequency L C circuit. Where the diode is the C and the lead wire is the L. Due to the rectification, just one lead is "hot", the one with the gas.
slinky460 1 year ago
Lid, What I am trying to say is, that the small capacitance in the diode that you are now using may be the actual receiver of the SEC and the one way effect of the diode is only secondary to the SEC receiving process causing the electrolysis on just one lead. The very small capacitor naturally in the diode which makes sense due to the high frequency of the SEC. I am starting to think that it is the natural very small capacitance of the diode that is really acting as the receiver here.
slinky460 1 year ago
All diodes exhibit this phenomenon to some degree (capacitance), but specially made varactor diodes exploit the effect to boost the capacitance and variability range achieved - most diode fabrication attempts to achieve the opposite. Lid, I wonder what happens if you use a varactor in the water? These are capacitance based diodes. Since SEC seems to be capacitance based as a transmitter, may be a varactor might make a good receiver. Maybe the small capacitance in the diode is actually a receiver
slinky460 1 year ago
Hi,
Give me a shout. I have something to share with you.
4FreshEye 1 year ago
Miniature solar system. SEC is sun and diode with milky haze is earth and its external field generated by the great sun SEC.
Anothercoilgun 1 year ago
Lid, I was thinking that a diode is really just a rectifier with leads attached. It is one lead that is producing the gas. I am not sure what the other lead is doing, if anything at all. I was thinking that the real action is happening inside the diode, the actual rectification. Selenium acts as a diode or rectifier internal to it's self also. Leads can be attached, or not. That is why I suggested using a Selenium and water mixture to (may be) produce the same gas as the diode.
slinky460 1 year ago
@slinky460 ----Looks like I have to take a trip to the drug store to get some Selenium. Hey it is worth a try.
Lidmotor 1 year ago
Lid, Selenium was once widely used in rectifiers. These uses have mostly been replaced by silicon-based devices, or are in the process of being replaced. Selenium is used in photo cells also and Selenium powder for these cells is available. Each Selenium atom it seems, is it's own little rectifier.
slinky460 1 year ago
Lid, what happens if you used distilled water and Selenium? Selenium acts like a diode, a rectifier. May be if you used Selenium like you get from the drug store vitamin shelf and made a mixture with water, you could create the gas with just the SEC field applied to the outside of the test tube, No diode required. Every Selenium atom in the water Selenium mixture would produce gas as it's own little rectifier. (may be) . A zillion Selenium atoms each producing gas. Might be worth a try,
slinky460 1 year ago
This is just awesome. And, I like your magnifying glass :p
crusiatusblack 1 year ago
@crusiatusblack ---Thanks.
Lidmotor 1 year ago
Lid, I am not saying that the gas is not Hydrogen or Oxygen or a combination of both. But the gas should be captured in a balloon or other container, taken to a lab for testing to see what it really is. It may be the diode lead is breaking down in the water due to the SEC field. I hope it really is Oxygen and Hydrogen or at least Hydrogen and not something else. The diode must be doing something as the gas only comes from one lead. I would say there is rectification of the SEC field.
slinky460 1 year ago
@slinky460 -----This really is electrolysis of water. What is of note here is the method. The fact that there is no direct link from the SEC exciter and the water.
Lidmotor 1 year ago
Lid, nice replication of Dr Stifflers work. I wonder if small copper plate attached to the lead would increase the (what ever it is) gas production? The diode seems to cause rectification of the SEC to produce the gas from the water. Also I wonder if the metal in the diode leads have anything to do with the production of the gas? May be the metal is turning to a gas and not the water. If so, this may not be actual electrolysis of the water, Hydrogen and Oxygen. Anyway it is interesting.
slinky460 1 year ago
Try other types of diodes and see if one works better then the other.
egn83b 1 year ago
@egn83b ------ If I was a diode expert I would but all I know is that this is a fast switching diode. Beyond that I don't have a clue what to try.
Lidmotor 1 year ago
please please try different metal at diferent spacing, in distilled water, see the distilled water is the most important part because in distilled water you maintain up to 1000 volts in a 1/2in lead spaceing without alot of drain,,,, so if you put disimilar metals into the situation with minimal distences the voltage is already in the water just need the different mineral to activate it. i used to burn copper anodes to make them blue, the blueing is actually like a insulator.= no gap in cell
crob227 1 year ago
@crob227 ---- If I put dissimilar metals in water I create a battery----but it would be interesting to see what a SEC exciter does to it.
Lidmotor 1 year ago
@Lidmotor I was implying trying to say do other types on diodes that are availible to you there are two diodes types I am aware of those are germainium and silicon diodes. I mean is try something with different current ratings and voltage ratings to find the one that works just as good or if not better then the fast switching glass ones.
egn83b 1 year ago
@egn83b ---I have some germanium diodes so that is worth a try. Thanks.
Lidmotor 1 year ago
So why a diode? There is no connection to the diode except on the anode side. I expect your results would be similar with just a piece of wire as the diode does nothing special.
valveman12 1 year ago
@valveman12 -----There is no connection to the diode at all. It is free floating in the water. There is only a capacitive link between the one wire coming out of the SEC and the diode. That is what makes this so strange. There is no direct connection to the water.
Lidmotor 1 year ago
@Lidmotor That is interesting. Thank you for the reply.
valveman12 1 year ago
i want to try putting alluminium foil onto the leads of the diode so that more current can go into the water.
rroge5 1 year ago
@rroge5 ----- I tried a carbon rod already and did not have much luck. You have to be careful that you don't setup a battery. The diode has to be able to do it's thing without interference. I found that if you add an electrolye enhancer like salt to the solution the effect stops. This doesn't seem to work like regular electrolysis.
Lidmotor 1 year ago
Hey there! Another nice video. I do have a couple of questions though.
1. Will that gas burn as it exits the test tube.
2. Will this type of electrolysis leave heavy metals in the water like the stainless steel HHO units do?
Thanks Again!
ProgressiveTV 1 year ago
@ProgressiveTV -----This method of electrolysis is brand new to me. It is the work of Dr. Stiffler. You can see his videos at MRH202 or visit his web site at Stiffler Scientific. My attempts to light the gas have been unsuccessful so far. I may need to set up a bubbler.
Lidmotor 1 year ago
maybe you can nickle plate the wire instead of the tin coating.......the wire is steel, clean off the tin with sand paper, then use electrolisis to nickle plate it.......then it will last even in electrolite.......can i get a copy of this circuit when you have time.....not sure if you have posted it.....you got a lot of vidios.....dont think i seen em all
irondmax 1 year ago
@irondmax ---Thanks for the tip. The circuits are all Dr. Stiffler's and he has many of them posted at Stiffler Scientific.
Lidmotor 1 year ago
nice keep up the good work
jccooluser 1 year ago