a friend of mine had the same problem while his amp was set to audio sensing. Which remote turn on do you have the amp in? There was: 12v, DC Offset, and Audio Sensing. This problem is usually caused by the wrong settings while in audio sensing. Try setting the amp to DC Offset. The Audio Sensing is for input levels around 5v, and if you have a factory amplified system its probably around 10v and above, so your amp should be in DC Offset. Also make sure your High/Low input is set correctly.
i have the same problem but im powering the amp with a psu.. i plug in the psu into the amp it turns on for a sec and turns off ...it use to work but idk wat happen and i tested another psu and the same problem plz help
check your power and ground and remote. take them all the way out of the car if you have to and visually check to make sure nothings wrong with those then run them again. I hope its not the amp.
MINES DOING THE SAME THING, ITS BEING A FUCKING FAGGOT!!
PLEASE SOMEONE TELL ME HOW TO FIX!!!!
MaximaJ31 2 weeks ago
thats how my amp kinda is but it only goes on for like 5 secs when my i turn my car on then wont turn on :/.
madmkila1 8 months ago
a friend of mine had the same problem while his amp was set to audio sensing. Which remote turn on do you have the amp in? There was: 12v, DC Offset, and Audio Sensing. This problem is usually caused by the wrong settings while in audio sensing. Try setting the amp to DC Offset. The Audio Sensing is for input levels around 5v, and if you have a factory amplified system its probably around 10v and above, so your amp should be in DC Offset. Also make sure your High/Low input is set correctly.
dandafuckinman 1 year ago
did you ever find out what was up with the amp?? mine is doing the same thing and i need some advice
jaZzyjeff818 1 year ago
i have the same problem but im powering the amp with a psu.. i plug in the psu into the amp it turns on for a sec and turns off ...it use to work but idk wat happen and i tested another psu and the same problem plz help
estasfeo44 1 year ago
calling the amp a "faggot" is not gonna get it fixed any faster....
vince1389 1 year ago
check your power and ground and remote. take them all the way out of the car if you have to and visually check to make sure nothings wrong with those then run them again. I hope its not the amp.
shanklin07 1 year ago
@shanklin07 me too!
thanks i will try that today
sfchawks01 1 year ago
@sfchawks01 how did that work out for you? Didi you find the problem?
shanklin07 1 year ago