5.0 Mustang exhaust clip

[tyrents334]

Sounds really good :)

[78SilverBronco]

How do you like the ported E7TE heads? I was thinking of porting mine, throwing in some bigger valves and running the stock cam with 1.72 rockers. What cam/roller rocker setup are you running?

[89stanghondaslayer]

Sounds like prettyboyent707 needs to do his ford homework.... Roller motor in 1982 mustang? Ahahahahaha

[fireman62truck]

this the best 5.0 hatchback mustang on here dude you kill everyone keep it goin

[brianburg11]

sound good, i have a small clip of my 5.0

[rp94cobra]

i love your exhaust by the was 2 chamber are the way to go

[rp94cobra]

4;10 gears your exhaust gt40 heads smog pump delete cold air intake aluminum drive shaft and short throw shift kit with a king cobra clutch oh my god you can only imagine the felling of shear torque you would have with a nearly stock car

[GTVert93]

Nice! So as long as you use the stock cam and the stock ratio rockers, you won't have problems with the valves running into the flat-top pistons when you do the E7 swap?

[5literfan]

sounds very good. 5 stars

[ShadowHerder]

Fuel pump is on the way out. Classic for mustang pump whine.

[JRTINA7620]

It has a bark and I want the same for mine. Can you tell me what all you did to it?

[Bornn368]

Sounds Good, but i heard a little miss there for a second or to at idle?

[Ray0442]

how much hp did you get from porting the heads?

[03CENTGT]

Never had the chance to have the car dynoed. I wish I could have. But back when I had it, I noticed a big diff. in performance. The car was running 9.8s the 1/8th mile stock everything and on my trip back after the swap I ran a 9.20@77 mph on street tires with stock gears.

[BLACKLACDTS]

@03CENTGT is it worth it to get the stock heads ported? im on the fence about it.

[GearheadRod]

Nice Stang! I have a 1990 Mustang GT and a 1967 Mustang coupe.

[xbox360fan246]

i have the exact same ehaust on my 89, nothing like crusin in 3rd then dropping her into 2nd and letting her breath eh?

[MrDsmguy55]

nice..i hope mine sounds llke that..ive got mac shorties...h pipe..and thats it...lookin for cat back magnaflows

[mrwiggz05]

sounds nice

[SJS68]

Damn that sounds sick as fuck! nice ponys btw...you sure those are flow 2 chambers ? that what i have an it sounds nothing like yours...

[03CENTGT]

Yeah they are 2 chamber delta 40s I believe. The car has a magnaflow o/r xpipe and shorty headers on the exhaust note. A set of E7te's that came in the 87' and up model Heads give it that deep loud tone. Sounds way better in person!

[jrcaprai]

Oh My GAWD.. "Heads give it that deep loud tone" Where do you morons get your info? Right out of your ASS I ASSume !

[03CENTGT]

NO out of your moms...Exhaust tone changed as soon as I swapped the stock E6SE heads for the later version E7TE's. The exhaust sound changed big time after installing those head you smartass!

[pugdug808]

I'm guessing that you're 17 and this is you 1st car? After you have 20 + years of Building race Motors, then you can make educated comments... Until then keep your Feces in your ass where it belongs!

[03CENTGT]

First car? You obviously haven't seen my other 2 Mustangs. Ans if you're an engine builder then you should be familiar with the 86' 5.0 and know that they do not sound the same as the 87' up 5.0s,and when I swapped the heads the car sounded way diffrent then before. So relax MR.ENGINE BUILDER

[pugdug808]

ok thats not me somone always uses my acount

so sorry that wasnt me

[saleenxxx]

@pugdug808 why is it when shit talkers get caught they say its not them ahahahah right

[pugdug808]

@saleenxxx what the fuck i didnt post that shit i dont give a fuck about your mustang so dont say that im covering shit up

[saleenxxx]

@pugdug808 and you get the thumbs up for being a pussy ahhahahah

[pugdug808]

@saleenxxx oh my god i dont use the word feces its fucking retarded and as for you god i tried explaining that it really wasnt me but your to much of a stupid cunt to believe me you fucking dumb shit

[saleenxxx]

@pugdug808 what are you talking about your as slow as you stick figure picture ahahahhaa

[pugdug808]

@saleenxxx whatever you dumbass what kind of retard takes that much convincing and still doesn't believe the truth it wasnt me that posted the first post but your just stupid so i know it wasnt me you can just go on being a fuck tard

[prettyboyent707]

@03CENTGT IT HAS THE SAME ENGINE FROM 86 THUR 95 SO WHY WOULD IT NOT SOUND THE SAME IF ITS JUST STOCK WITH EXHAUST AND CLEARLY THATS ALL U HAVE..... TO BE EXACT THE ROLLER 5.0 ENGINE WAS USED FROM 82 TO 95 AND 1982 TO 85 WAS Y PIPE EXHAUST THAT SPLIT INTO DUAL MUFFLERS IN THE REAR. I SHOULD KNOW I JUST PUT A O/R H-PIPE ON MY 85 T TOP ..... SO REALLY THE ENGINES CAN ALL SOUND THE SAME STOCK TO STOCK WITHOUT MODS. TO JUST LET YOU KNOW..... PS. DO YOUR FORD HOME WORK. IF YOUR GOING TO DRIVE ONE!

[need2speed94]

@prettyboyent707 roller motors weren't used until 85. your foxbody is the first year they used a roller cam i dont know where you got 82 - 95.

[xNibz12345]

@prettyboyent707  you should know 85 was the firs year of the roller cam .... you should find a new website to get your facts right !!

[WildWillyWalker]

The biggest difference would be that x-pipe. Most guys go with hpipes on pushrod motors. Sounds sweet though dude.

[b0rs]

sounds like single chamber flowmasters. You should of got turn-downs right after the cat convertor instead of straight pipes to the back.

[03CENTGT]

Thanks, the wheels are the pony rims they where just painted black.

[TamiyaDude]

Did you paint them yourself?

[mishke]

sounds healthy-flomasters?got an 86 myself-blacked out mt 10holes-looks like u did the same to cobra rims..?