3000gt lifter tick or spun bearing

[chamblizi]

what i don't get WHO THE FUCKING HELL DISLIKES THIS THIS IS FUCKING HELP SECTION! FAGGOT GO HOME ~,~

[bronco6921]

dude does this sound goes away when you go pass certain RPMs I had the same noise and took it in to a local shop. My timing belt was loose. I had it fix and the noise now sounds more like lifters. that is not a lifter!!!!!!!!

[KilluhCalKushMan]

@bronco6921 Sure It Was The Timing Belt.? I Checked Mine And It Was Tight.

[vanagon101]

Its a rod knock the engine is done

[adan1799able]

hahahaha bearing on cranckshafft hahahahaha no engine sale it i buy it

[ladygodia]

It's a lifter... meaning your pistons about to lift it's damn self out that motor.

[piecartbox]

Heart sunk when I heard, I imagine you wanted to die.

[piecartbox]

ouch dude

[MegaCutie123456]

what is a lifter tick?

[godrilla]

Way tooooo loud to be a tick. Sounds like banging. It is a rod..

[shawnkdunn]

Sounds too spaced apart for a piston rod bearing...let us know.

[coffey46]

damn, you thought that was a lifter????

[3kgt1992]

OMg im having flash backs. U got a fucked up rod bearing or three. Dont start that car for long. U must of missed a oil check or ran wetshot into it.

[hellionzero766]

Have fun rebuilding that. Oh and when it comes to timing that, have fun not smaking a valve

[eroc2689]

oh god please shut it off i can hear the damage!! LOL :(

[00duce84]

The first thing to do is to listen to a person who know these motors. I've race built and blown up my fair share of 6g72's. Recently I've had that same sound on two different occasions. One on my street car and the other on my race car. One was my AC compressor was coming apart, Crazy. The other a spark plug that got shot out of my # 6 cylinder. My point is check around before you jump the gun. Look at the vital signs. Oil pressure, cylinder to cylinder ect..... It could be simple

[jamesvzfighter]

how many miles is on this engine?

[RecedingMillinium]

the more it runs the worse off it is

[NWO41508]

i bet that wa sa pain in the ass to rebuild that engine.. the stealths/3000gts seem like there are a pain in the ass to work on?

[PePeLePeW42089]

dude thats no lifter lmao a lifter is an actual tick this sound like cracked out speed addicted hamster acting like a woodpecker THATS A ROD bud if im not wrong !!!!!

[littleowen212]

someone stole ur v6 petrol and replaced it with a diesel

[SkyLineSpeedz]

smells like an engine rebuilt :S

[xtreme01hac10docter]

Here's how to fix the problem: Put a rock on the gas pedal and let it run full throttle for about 20 mins. that should fix it.

[7butterscotch7]

ahh fuuk my life..car is making the same sound. and yes i raced and lost. shity ass 1993 ford probe GT oh wel

[WOTGTP98]

Honestly? You cant tell if thats a lifter tick or rod knock? I hope you arent the one rebuilding the motor.

[chris12123212]

i hear both but the hard knock is the rod

[ildj08]

dude definitely a rod! good luck rebuilding!

[RicerFromIowa]

time for a rebuild... good luck man

[rgrafton]

lol @lifter  #spunbearing

[bmm1793]

hey guys, can you watch my video and tell me what you think the problem with my engine is?? Thanks, it would be greatly appreciated!

[XxilikesoupxX]

deff sounds like a rod knock to me.

ha.

[coombsy16]

might be savable. dont run it though. tear it out and see whats going on. probably a broken conrod OR conrod bearing burnt out

[elemineseslapolla]

sorry man, your engine has dieded

[JISINSANE1]

Oh I forgot to mention to, If my suggestion does not work, Drain out your oil from the engine and put about 5 quarts of whiskey in the engine run it redlined for another 5 minutes, This will clean any dirt in the motor. Again, Disregard any unusal engine noises and oil pressure readings and tempature.

[JISINSANE1]

Thats just a small little lifter tick, You will be fine, Trying running some 0w-10 weight oil in it and rev it past 10krpm and hold it there for about 5 minutes, The noise should go away then And disregard any oil pressure readings, That is normal. Glad you made this video, Cause its really hard to tell between your 2 questions.

[freddyp413]

same problem with my 99 SL. deff a rod i had it looked at. question is can u drop the cross member beneath,drop the oil pat like TXT was saying? or is there other steps invovled? thanks.

[NelsonStJames]

Mine isn't that bad, you only hear it at start up and sometimes when you accelerate, lay off the gas it goes away. Which is easiest to repair, spun bearing or bad lifter?

[vr42000]

VALVE? OR CONROD CAP

[MrLegendary88]

you might wanna check your oil level... cause i heard the same noise and my car was burning oil and was 3 quarts low... i did an oil change with Castrol Edge 5-30 and that "knock" disapeared... now if when you change the oil you find metal shavings, then you most likely have a spun bearing and not lifter tick...

[alienfrmearth]

that is a rod... not a lifter...

[angler765]

bang it on ebay

[Paiste402]

:o...

[kolbiie]

lol u wish that was lifter tick

[lavid2006]

hahaha that made me lol

[cwsoicy]

damnthat just happened to my car FUCKKKKKKKKKKKKK i hate my life right now.... wtf do i do now i have a spun bitch asss bearing

any advise???

[txtrcr]

you fix it, its not that hard really, remove the oil pan. Find the rod thats not tight, remove the bolts, take out the bearing peices. use a caliper to see if the crank has been misshapend, same for rod, if ok then install new lubed bearing, then clean out oil pan and go hot rod some more. easy weekend job.unless you drive it till it quits running or till the noise stops.

[xterc1]

spun bearing mate

[mybuttcheeks]

thats a spun bearing fo sho

[mommysaisimpro]

Change your oil....You probably have a dented oil pan

[midnitesquirldog]

the lower half spun the bearing under high load like over reving it i bet it will eventualy make a bang and the motor will quit

[smithraymond]

Squeezing 3.0 liters of v6 motor into an engine bay sideways? Someone should hang those design engineers. They have a deal with techs that service these machines.

[smiley00341]

What caused it? were you racing?

[ohloody]

theres a difference in a KNOCK and a Tick.

[YouraN1993R]

lmao you think thats lifter tick. HAHAHAHAAHAHAHAHAHAHAHA

[Mfoehrkolb21]

I almost keeled over an died of laughter when i listened to this and read the title... LOL!... But seriously dude... That's definitely a "tick" and not a "knock"... LOL.

[mybuttcheeks]

thats a knock my lifters tick in my 1989 mitsubishi montero and sounds nothing like that

[espionage84]

defo spun bearing

[ondonti]

Almost all of the videos are lifter tick on youtube, the owners just have no idea. This one is Rod knock. its a great video with great audio.

[jeremysgonenorth]

It's pretty bad when I type spun bearing on youtube and see nothing but 3000gt vidoes coming up considering I have one!

[memphetic]

If there's a dent in your oil pan, bang it out with a hammer. Spun bearing possibility fixed.

[RatRodDeLuxe41]

all 3000gt's do this, mine did too. bearing. pull the motor, reeal its fun, lol.

[memphetic]

Well, not all of them... it takes proper maintenance to prevent it though.

[ryanberry88]

ROD KNOCK!!! stop trying to start it!!!

[xiongsta00]

your rocker might be fucked up.

[terrancoleman]

ouch rod knock. park it