Extreme Garage Makeover

[wittethan]

If I could only afford it all...

[ytregguy1]

I've done some work to the interior of my garage, check out the progress and maybe get an idea or two (?)

Search: 'Finished Garage with 2 Post MaxJax Lift' on You Tube or Google to see my video

[djspray803]

Thats super awesome and all, but how much did all of those shelving units and toolboxes cost? probably around $3000 to $4000 for everything?

[suddnstar]

Nah, you'd definetly need more space cause I don't think your roof is high enough for an alignment rack or a lift. Also you'd be pretty crammed with them.

[suddnstar]

That is the way a shop should be. Everything should be organized, so you can find whatever tool you are looking for when the need arises. Also I love how you all keep the tools nice and clean. It helps keep the boxes clean too, in some shops they don't clean the tools so rust, grease and dirt are all up in the tool box. All you need is a lift and an alignment rack, but you'd probably need more space for those.

[motorztv]

@suddnstar Thank you for watching, and the for the great feedback! Most of these tools were new at the time we filmed this episode, however we always clean them up after we use them so they are all still looking great!

[motorztv]

@MoonlightAutoRepair Have you tried their customer service or Facebook page?

[mike081283]

i don't have know any 1 named buddy but i have a friend named matt will that work

[motorztv]

@mike081283 That will do then :)

[thejazz1510]

what tool set is that one on the partz section?

[thejazz1510]

looks great 

[MeanStang08]

is that a squirrel? lol 

[motorztv]

@MeanStang08 It's Clay "Bar" the squirrel

[MeanStang08]

awesome show, i'm SOOOO envious of all those nice tools.. garage looks great Chris!

[oneoleqt]

are craftsman rachets covered under the lifetime  replacement warranty

[motorztv]

@oneoleqt Yes, in fact I don't know of a Craftsman tool that isn't.

[itsdaveperdue]

@motorztv From what I understand their torque wrenches aren't covered (their considered measuring instruments)...speaking of which I need to buy a torque wrench!

[asyoulikeitvideos]

My garage is suddenly jealous!

[motorztv]

@AnythingWeThinkOf Good luck at UTI! Please let me know how it goes...

[reallunacy]

Congratulations on having such a great set up. Question though, is that compressor you have a two stage that can be used for painting? Also, I'm digging that rotor and caliper clock you have back there.

[motorztv]

@reallunacy Thanks! It isn't, but you can learn more about the Craftsman Professional 27 gal air compressor by going to sears(dot)com/tools and searching for p/n 00916474000

[dilpickle218]

Hey Chris did you switch the F-150's wheels to DC-2's or is that from the Jeep JK in the after shot?

[motorztv]

@dilpickle218 I loved them on the JK so I got them for my F-150 as well :)

[mariokart209]

Yes Im getting my Spark Plugs, Luis Rodriguez, I love E3.

[motorztv]

@mariokart209 Congrats! I'll send you an email soon...

[RoniisH]

I've almost given up hope on Motorz, you post a video like once a year.

[motorztv]

@RoniisH In 2010 I produced 20+ videos. Keep in mind that when it comes to editing and distribution I'm a one-man show. Also see the previous video "Motorz TV February 2011 Update". Thanks for watching! -Chris

[67mustangreg]

I agree about the honda. not that theres anythign wrong with a ford... but a B series would be cool to see worked on.

[andrestnt]

WOW awesome tools, but man are they expensive.

looks like you have 10k worth of tools.

[003Mexicano]

hey chris i really like your show, i also saw that your a crafstman guy just like me but what do you think about snap on tools? have you ever used them? will you ever use them? are they really that much better than crafstman tools? because my friend recently bought some snap on ratchets and he keeps saying that craftsman is nothing compared to snap on. he says that just because snap on makes ratchets with swivel heads.

[67mustangreg]

@003Mexicano ....snap on is better, ask the pros. when you really, need a quality tool, snap on will win everytime

[butty41]

@003Mexicano well i have some input. snap on can be VERY expensive. but my dad is a mechanic and he does buy snap on, mainly becuase they are tough well designed and have a lifetime warrenty, hes just had a plastic mallet replaced, free of charge and it was also about 10 years old. so they are a company that you pay for what you get. some times though u dont need the most top quality stuff, so think if it siuts your needs

[motorztv]

@003Mexicano I have no personal experience with Snap-On tools, but I can tell you that there's been many occasions when we've been filming on the weekend and we needed a tool--a Sears store was accessible and we got our tool quickly. Due to my relationship with the Sears Blue Tool Crew, you won't be seeing anything on my show that's not sold at Sears.

[sergh8605]

i envy you guys

[bsl3216]

Those those tools are sweet that's why I never go to sears because I would end up walking out with to much of that stuff and Chris you forgot the zoot!

[motorztv]

@bsl3216 I know the feeling... it's like walking into a candy store every time I walk into the tools section. I didn't forget the zoot... it's just no longer a part of the show.

[motorztv]

@VitoRocks03 I didn't :) More on the job training with smart people. Have a great time!

[GenuineCriminal]

@motorztv Hey do you know anything about wyotech? have you heard anything?

[motorztv]

@GenuineCriminal I've heard some good things about it, but I don't have any personal experiences to share sorry!

[keyandnut]

100th video coming soon XD

[motorztv]

@keyandnut 3 away!

[crawfdady]

the tools and garage are insane :D i would love that garage 

[motorztv]

@crawfdady It helps to make filming go faster when we have everything... :)

[TUNER429]

12:26 Man those hand tools looked really nice! Wish i had them in my garage

[theflashjaxx]

can i come hang out in ur garage, its freakin' awesome now

[motorztv]

@theflashjaxx Thanks... it's so nice to have Sears on board as a partner with my show :)

[Kirbynessness]

What I would'nt give for all these!! Congratulations fellas!

[motorztv]

@Kirbynessness Thank you kindly! Subscribe to the Blue Tool Crew Facebook page or Twitter as they have sales and deals all the time!

[integraz32lover]

When you said get over buddy...you should have said GET YOUR ASS OVER HERE BITCH!!!!!!

[renthal971]

Good episode. I need to check my ball size.

[motorztv]

@renthal971 Good luck with that! LOL

[chunkyfunkymonkey28]

The sears guy for the commercials looks like he's about to shit himself he's so nervous

[motorztv]

@chunkyfunkymonkey28 Oh I think Nate did an excellent job with that. He's clearly a bit green on video but he nailed all those bullet points perfectly!

[integraz32lover]

Have you ever gotten mad during an episode...you should sometime....it would be funny

[motorztv]

@integraz32lover We all have our moments I guess, but for the most part No--we have so much fun filming this show we usually have to stop laughing and get serious before a take.

[integraz32lover]

@motorztv But if you do get mad one day FILM IT PLEASE

[integraz32lover]

Some one is helping you at 04:03 ....its about time

[motorztv]

@integraz32lover There are some things I shouldn't be doing on my own... :)

[integraz32lover]

@motorztv You mean every thing

[integraz32lover]

At 03:51 uuuu thats loud..lol

[motorztv]

@integraz32lover It was much louder in person than in the video LOL

[integraz32lover]

@motorztv I can see that

[integraz32lover]

WTF????????No one was helping you out at 02:30 ......I can see that lazy ass camera man just sitting there

[motorztv]

@integraz32lover LOL! It was just my camera guy and I that day. I built the other 2 by myself prior to that one in the episode so it's no big deal...

[americansmark]

Can I HAVE a garage? I could use a lift and a low profile jack. lol.

[motorztv]

@americansmark I think Gladiator GarageWorks is giving away one through some other site (I can't remember which one off-hand)

[americansmark]

@motorztv Awesome. lol. Thanks Chris.

[integraz32lover]

YAY!!!!!!!!my garage is a freaking mess....Btw you got me kinda excited by saying "today WE ARE DOING A GARAGE MAKEOVER!!!!!!!!!"

[motorztv]

@integraz32lover It was fun :)

[integraz32lover]

@motorztv OK but isnt working on a car alot funner

[BlackShadowBM]

Looks Great!

[motorztv]

@BlackShadowBM Thanks!