I Hope you have fun doing this work i sure as hell like watching it, and if the free energy gig dont work out you can always paided by you tube to go buy electricity lol oh i realy do hope you do well, i have some ideas also but we see how things go
sounds like you are a vollpfosten du klaus, with a lightbow, a mousetrap and wood it'll always be easy to set up a fire. thx for wasting my time. but BTW, how did you get that thing to rotate without any further finger-input? may be you secretly installed a coil and a power supply to get that thing rotating? ehr, just because I can't see the sourounding and the setup.
I've always thought of this kind of design for some sort of self powering magnetic motor, good to see one kind of working, you could probably replace the wood with metal or some sort of carbon fiber and you wouldnt have to worry about that burning.
hey, great ideas in your videos. i'm doing a project for an alternative energy class and i would love to use some of the ideas from your videos in it. if u could make a tutorial for your latest model that would be great. thanks.
Nice Video That You Share , So Very Nice Thanks You This is just a test for the rotor and the switching mechanism. Nothing more. There's no load or generator hooked up to it.
I Really Like The Video From Your This is just a test for the rotor and the switching mechanism. Nothing more. There's no load or generator hooked up to it.
Your Video Is Very Useful Sharing This is just a test for the rotor and the switching mechanism. Nothing more. There's no load or generator hooked up to it.
this is like a breaker point in a magneto for an aircraft engine. The high voltage spark sent to the opening and closing of the breaker points causes sparking between the two points which can get so hot that it ionizes the air around the points getting to the point of possibly welding the points together. Try running a capacitor parallel to the points to prevent this from occurring.
Thought it was funny that I'm being called an idiot for supporting people who enjoy making things instead of you ignorant/low negative scum always having to be detrimental towards new ideas or fun. Can't stand reading peoples comments on YouTube, grow up, stop being so negative about life and continue to follow society and how it's shaped your "wonderful" views.
@cassius969 wait are u tht retarded millions of people have already done it some people are even starting to develop cars powerd by magnets... u.. u.. idiot!
@MegaRuckaruckafan yeah where are those devices powered by free energy? There are only scams in the internet where they sell plans to build such a device that does not work as advertized obviously. If somebody builds a free energy device the trucking companies are gonna be all over him. Those eastern Europe companies dont give a f if the energy giants are pissed off or not.
@cassius969 You are a naive fool, look around stupid. Do you think any government doesn't like money? In case you havent noticed even if they didnt America runs the world, and they are very very very greedy. No money in this means no government interest.
@ShadyRaider There would be at the very least a criminal market for it and like I said somebody would try and use a free energy device for military purpose.
Yah, I was thinking about wooden truck, and wooden truck cannot use metal, so its stealth and wooden truck, but wooden truck uses water and capacitors so that it stays stealth and lite weight.
I'm sorry, but it's just a motor, not a "generator". the system is known since more than century! :( What's new here? I don't see anything about overunity nor "free energy"! :( For overunity, always need to have an "out-put" and an "out-put" in terms both of power and to be able to calculate the efficiency of the system: "out-put" / "in-put" > 1.00, if not, means nothing :/ Sorry. Regards.
@Khwartz if you read the description you'll find it very clear that this is not a generator. Nevertheless if the wheel rotates without consuming any energy then it should be no problem to hook it up with a generator and get the required output above 1.00.
If you've watched the previous models leading to this product then you'd understand the whole idea of this vid.
@FreeRiderDZ I DID (!) understood that was not a generator, and that's why I've argue for the use of the expression "free energy" in the title, that could only apply if use as generators (even if some call "motors" or "dynamo" presented and intended "free energy devices", like "Muller's dynamo".
@Khwartz it's true about the title, but considering the video as a part of a series of videos then it makes perfect sense. anyway if you look solely on this vid then you are right :)
@FreeRiderDZ Ok could be I understand even if I have no time for now to see the other vids: you mean that the intention and interest is about free energy, but that you recognize that is not yet achieved in this vid, that has no intention to say that was any way? Are we fully agree now? ;)
A generator is a motor with copper and magnets. If he can get the motor to spin for free then he can generate energy for free. It's called a dynamo. Look it up.
@ShogaNinja No, sorry, it could be a "motor (like) with copper and magnets", but a generator is not oblige neither to have copper nor magnet, just it could be like you said. Yes, when a generator use magnets and produce DC current, we are used to call it dynamo, but alternators and dynamo are often miss-used word. Remember: I'm trained electrician and have my own business in electricity ;)
For speed for free it's not sufficient, need torque too & so on, could drop otherwise.
It's a work in progress. A motor such as this, made larger, and spun up with electromagnets and fitted with copper and magnets can work. It may cost energy to get going but once in motion would power itself. Even if it only generates DC you just invert the DC to AC. This may be science fiction but one day it may be science fact. It starts with little experiments like this. A tiny alternator can power your entire car.
@ShogaNinja Ok, so, show me that, as it looks so easy for you and that you're so sure! ;)
I'm very about Free Energy indeed, but can have a long way before to reach overunity in the same kind of energy device (EM-EM). That is the challenge, because already have many "overunity devices", or more professionally COP>1 like heat pumps, wind turbine, solar panels, etc. COP is the ratio of the energy we want under the one it costs to us. Self-running system would achieve infinite COP ;)
@koolumbo4real Ok, but what is the problem here with me?! do you reproach me to distrust the video maker or the comment of ShogaNinja? in giving me you pity like you were the bright mind that could see the other from your highness to grant them like this?
I try to bring something constructive, in case you didn't notice: it's to bring rigour in experiments and their interpretation for free energy real benefit & make some people wining their time. What the problem with that & you?
make it so it push's it with magnetic power your letting the timing mechanism hit those 3 magnets you have on the motor you need to make it so they don't touch each other.
@SpeedsCustom - No he actually is right. These free energy videos are a joke. You can see a ton of them on youtube and none of them have led anywhere because you cannot create energy out of thin air.
@ffstibs Good job. You recommend solar panels, something pretty inefficient, to people who are designing and inventing in their own free time. Fuck you Benjamin Franklin, just go buy a candle stick and stop wasting your life experimenting with alternatives.
@Geechs I don't get the reference to Benjamin Franklin... Do you think he invented the lightbulb, or do you think he discovered electricity? because both are wrong.
Mate you just keep getting them in. 133256 hits on this one. How many hits do you need to get before they will pay you for the ads? Serious question. I want in on the action.
We created new Alternatives to get our Electricity such as Fuel, Solar and Wind Generators; but No Fuel, Sun or wind means No Electricity.
Some created Magnet Generators as do-it-yourself Toys & Video Clips and asking for donations.
The Perfect Generator System that needs no Fuel, Sun or Wind to Supply Electricity is Shahin Electro Magnet Generator System whenever Electricity is needed with no Extra Costs to get Electricity.
"The turning of an iron and metal core creates magnetism in the center of the earth." - It also creates gravity too, funny that!
Yes but it only need to be moved into the field once if you use iron to block the attraction effect and it's reppled onto a circular object. You only have to think about it and apply some logic.
@Archline2 Gravity is not created by the dynamo in the centre of the earth. Gravity is a force that exists between all objects which have a mass. If gravity was a function of our planets iron core then *all* objects would need such a core to have gravity. Something we can see is not the case simply by looking into the sky. Einstein explained that it's due to mass bending space-time.
Every put a block of iron onto a magnet?
Did it block the effect or just become an extension of the magnet?
@mryellow123 Gravity Is not created by the dynamo in the centre of the earth - True
But what is the dynamo at the center of the earth made of? Could it possibly be iron and does it not have a mass? Remember not once did I state it was only because of that but that is a big mass.
There's a person who has some special type of Iron or something and has managed to block it effects dont ask me how there's a vid on here somewhere showing it. If your that intrested I advise you look for it.
@mryellow123 I see what you’re saying but a dyno involves direct friction between wheel and dyno and the shopping trolley you are physically moving yourself, no natural force is moving both for you. Both you could say are using a thermal energy source not just as a initiator but also as the sustainer, that's not the same in terms of magnetic force.
@Archline2 No I'm not talking about the friction waste on the wheel.
The dynamo is a coil of wire and some magnets (not touching).
The light is the load.
Moving the wire through the magnetic field takes work because of this load.
The higher the load the harder the dynamo/generator is to turn.
Nothing to do with friction.
Force is force is force is force. Magnetic or otherwise. The force I put into the trolley is transfered via the magnetic field to the 2nd trolley. Equal work.
@mryellow123 Give up. You cant convince some people of what they don't want to believe no matter how much sense you make. some people just want to believe there is a simple and easy way, that for some reason hasn't been thought of yet, to get free energy
@Archline2 [The turning of an iron and metal core creates magnetism in the center of the earth."] - "It also creates gravity too, funny that!"
No it doesn't. You only have to think about it and apply some logic. If it were spinning in the opposite direction, would it be creating anti-gravity? lol
Stick a static coil in the middle so that it goes round the center axel but doesn't touch anything else, then stick a magnet to the axel so it is in the middle of the coil. Then hook the coil up to a battery and the clicker. See what happens? Seriously man I'm intrested in what the results would be? I reckon as long as the friction ain't too bad and the battery is decent and rechargeable it might be able to power itself.
Wonder how well it would work on the dark side of the moon, free cooling and low resistance or maybe it would be weaker because the magnetic field of the moon is weaker? and where does the magnets get there energy and how much energy did it take to make em. not completely free.
@BlocklandWorld Know what? That energy only changes form? Because all our knowledge of the universe confirms what we've learnt through our long history. If it turns out possible that energy can be created or destroyed, you can bet it ain't gunna be on someones desk with a few magnets and a switch.
@mryellow123 I know that science and actually playing with stuff breeds enlightenment and saying things like "what we know now is how it is" is certainly a pretty sure way of standing still rather than progressing. Saying it wont work and using history as a reason is like saying "don't try and cross the ocean because the world is flat" 400 years ago, it's certainly isn't the case now and wasn't the case then.
@Archline2 This all sounds wonderful and is a great way of making people seem "close minded" however it's akin to a person who believes the world is flat telling Columbus "You're just blinded because you were told lies, disinfo agent! There is no America!"
He's admitted there is an external source plugged into this but what you have to do is say well ok this is spinning what happens if I turn it into an alternator to source itself, not hard. Then how do I make it more efficient. Without asking and exploring these and other possibilities you will always come to the conclusion that its impossible, then you will never progress. You know science should never be dictated, it should be explored like the world was explored centuries ago.
@Archline2 A powered "magnet motor" as a generator is simply a "transformer" it changes the amps/volts but no energy is created. Really effective technique for fooling people.
@mryellow123 I see volts and amps being transferred into a spinning movement using magnets. The question remains can that be refined using better/frictionless bearing and heat resistance materials to make it efficient enough to replace those amps and volts that made that movement and create surplus. I'm not saying it works I'm saying can it be made to work? It’s not saying it is, it’s saying what if? That difference between an open and closed mind.
Lets say you can design a 100% frictionless device (good luck) which accepts powered input and turns a load to generate power.
You say "create surplus".
Where would you say a "surplus" of energy could come from in this or any other configuration? The fly-wheel effect of the whole thing is simply stored energy from the input.... So where would you get this surplus? What is this "it can work in theory" thing you talk of?
@mryellow123 Ok dude I'm not here to educate you on the way the world works.
"Magnetic Ball Bearings" are low friction, not frictionless though. Imput is feeded from a replusion effect of magnets which doesn't cost energy per part apart from making the magnets. Some also theorise that tides are influenced by gravitational forces of the moon and the sun. Some also theorise gravitational forces are apart of magnetics and the way the earth spins. It's all on the net buddy go read it!
@mryellow123 So if it only needs to be moved into the field once and it makes more energy than it consumes it will also make back the energy it took to move it into the field. That's just simple logic.
Now you can either sit there and say its impossible, just like a roman might say its impossible to cook food with out fire (microwave) or you can go learn it for yourself.
@BlocklandWorld These magnet motors are just a trick of perception more then anything, perpetual motion devices have been around for centuries and they never work. They are generally simple highly efficient machines, always losing small amounts of energy as heat/light/noise/etc. In other cases needing constant input of small amounts of energy. Often the input is obfuscated so without looking deeper it appears to be "coming from nowhere" but is always some external source.
@mryellow123 I see no reason why it can't work, at least in theory. One guy claims he has made such a machine "torian III" type it in search. If you base your theories on other age old theories like thermodynamics then maybe you should be looking at the steam engine page or just bury your head in the sand because I fail to see how magnetic fields have anything to do with heat exchanges, I don't know why people are referencing it to this, this is electro-magnetic dynamics not thermo.
@Archline2 People who claim to have built working perpetual motion devices or free energy generators are exclusively scammers and never demonstrate a truly functioning device. There is a MASSIVE difference between a "law" and a "theory". Why are people talking about heat? Because heat is one form of energy, noise is another, when a machine makes heat or noise that is inefficiencies immediately apparent to the observer. Magnetism is not a form of energy.
@mryellow123 I didn't say magnetism was a form of energy, it's a natural force a bit like the waves on the ocean is a natural force :-D. Heat and noise is something that can be reduced with refinement. Laws and theories are man made they too are often prove true or false by refinement.
How about a hall effect timing device or you could use light beam interruption all are relatively cheap can get the parts at local electronics store may need to look the designs up on the web first to understand them though :-)
the thing that hit me is that functions similar to a tattoo machine, maybe try using an armature bar, spring, points, and contact screw for a tattoo machine, they might not use quite as much power but i'm sure they can handle much more rpm than what you're needing
you need to use a hall effect sensor and a good mosfet for this, it would be much much more reliable and effective and it wouldn't be easier to wire and implement than the mechanical setup you have done here
sorry but this is just stupid. there is not even the slightest potential for free energy from this or any design similar to this. All you did was build an electrical motor. energy input with out energy out put.
@lostinthewoods1026 If all that is input to it is his hand giving it that first push, and then It picks up speed and starts generating, then it is nearly free and very cheap and safe.
@SeanRamey No, it's not free, it's using the energy stored in the magnetic fields of the magnets. Fields which cost energy to produce and which get weaker as you use them. . .
@SeanRamey All he has done is build an electric motor. The concept is simple and is not new what so ever. There are different levels of efficiancy however this is not a generator. It is using electricity as an input, with no electrical output. Any electrical output would come from what is esecially an alternator, which would put drag on the system slowing down the motor or increasing input energy by a greater amount than the output to maintain spinning. Look up "electrical brush motors".
Ooh, interesting point here. If someone *did* somehow create a perpetual motion machine, would it fry itself instantly due to the imbalance of power? I'm honestly curious.
Conservation of energy is a basic law of the universe... sparks= electricity and light energy escaping from the system, so this can't be claming to be perpetual motion, what does it run on?
You need to collect that back emf rather then wasted! Here is how" Put a high power bridge diode rectifier 2 of the ac in puts on that sparking switch then other end of the br diodes has to be connected to a 50v 10,000 MF (or so) capacitor, then you will be amazed how much back emf you will be able to collect. If you need a further help? Drop me line man and I send you drawing how to do that.
can somebody explain this to me? so basically the wheel revolves by the help of magnets and a li'l help from electricity that is actually produced from the wheel itself, like of that wind turbine thing? so basically this machine produce more work or energy than they consume? awesome!!
since you use a mechanism which uses a battery to trigger the magnets ... you put in more energy that you get out. because once the batts are out (outside interference) the device slows down, because if friction and the fact your using magnets. srsly man go and take some physics classes ... its embarassing to watch this. nice goal actually but not possible, like travel at lightspeed which isnt possible.
fapfapfapfapfapfapfapfapfap
hakmurro 5 hours ago
. . .free energy or free (CLASSIC electric) motor ? ? ? -_-'
Petardo238 1 day ago
use a transistor instead of a mechanical switch.
rizendell 3 days ago
This is obviously energy amplification. It's not free energy.
luciddreamerism 3 days ago
I Hope you have fun doing this work i sure as hell like watching it, and if the free energy gig dont work out you can always paided by you tube to go buy electricity lol oh i realy do hope you do well, i have some ideas also but we see how things go
SouchonP 5 days ago
Who cares if it's on fire? It's FREEEEE!! :D
Oh wait... when you said a "**FREE** ENERGY MOTOR"...
IloveCaramelldansen 5 days ago
fire= FREE energy YAY! :D lol
boobie284 6 days ago
appears to be a recreation of the electric motor, not a free energy device....
xKORTHOSx 1 week ago
sounds like you are a vollpfosten du klaus, with a lightbow, a mousetrap and wood it'll always be easy to set up a fire. thx for wasting my time. but BTW, how did you get that thing to rotate without any further finger-input? may be you secretly installed a coil and a power supply to get that thing rotating? ehr, just because I can't see the sourounding and the setup.
MultiSecretViewer 1 week ago
This information will help a lot for sure....
If you want to Get the Plans for the Free energy generator
Go To Google and Search for "Top Magnetic Generator"
Select the First Result (Skip The Advertisements)
jonathoncrowe28 1 week ago 3
Very nice!
PiccoloMichela 1 week ago
In all honesty though, this is really cool.
lostGash 2 weeks ago
Nonononono, you guys got it all wrong. He's building a fire generator. SUCCESS!!!
lostGash 2 weeks ago
cool electric engine
BartJBols 2 weeks ago
You spend $30 and a few days to make fire?
DennisPochenk 2 weeks ago
SCIENCE!!! Why dont they use this on a large scale? I Mean you still get a good output and that little tap could give more jobs!
N8ERCHIPJR 2 weeks ago
Comment removed
astriknon 2 weeks ago
how do you stop it?
steammaniac314 2 weeks ago
I've always thought of this kind of design for some sort of self powering magnetic motor, good to see one kind of working, you could probably replace the wood with metal or some sort of carbon fiber and you wouldnt have to worry about that burning.
trezza181 2 weeks ago
hey, great ideas in your videos. i'm doing a project for an alternative energy class and i would love to use some of the ideas from your videos in it. if u could make a tutorial for your latest model that would be great. thanks.
-Dan from Michigan.
dantrupke 3 weeks ago
Seems like you stirred up some Controversy here Guy, LOL... AA well, goes with the territory I suppose...LOL. Interesting video non the less.
Thom in Scotland.
fuelban 3 weeks ago
Nice Video That You Share , So Very Nice Thanks You This is just a test for the rotor and the switching mechanism. Nothing more. There's no load or generator hooked up to it.
fitnesus 3 weeks ago
I Really Like The Video From Your This is just a test for the rotor and the switching mechanism. Nothing more. There's no load or generator hooked up to it.
lupabuatchannel 3 weeks ago
Your Video Is Very Useful Sharing This is just a test for the rotor and the switching mechanism. Nothing more. There's no load or generator hooked up to it.
cenedywong 3 weeks ago
put your balls in there
weekendswithme 4 weeks ago
Very intresting
Jaydakaskittle 1 month ago
wow troll physics do exist :o
xMrjamjam 1 month ago
Well, at least you can warm your hands a little.
EthanNin0 1 month ago
Day 3... Supplies running low... We're still searching for ffstib's comment...
MrMollusk7 1 month ago
I hear it making noise...Free energy fail.
thedarkone2134 1 month ago
This has been flagged as spam show
this is the solution
h tt p:/ /w w w . youtube.com/watch?v=Wd4ekSUoFXQ&feature= related
leps85 1 month ago
this is like a breaker point in a magneto for an aircraft engine. The high voltage spark sent to the opening and closing of the breaker points causes sparking between the two points which can get so hot that it ionizes the air around the points getting to the point of possibly welding the points together. Try running a capacitor parallel to the points to prevent this from occurring.
oldredford300 1 month ago
here i am on the magnetic part of youtube again ... : /
WhiteEyeTree 1 month ago
good shit bro keep up the work
prthomas0321 1 month ago
I fixed that problem with Olive Oil.
quovolez 1 month ago
Too much free energy! Nooooooooooooooooooooooooo
lexichronicle2 1 month ago
Scams.. You guys are better off building your own solar panels on your house.. Just research.
TrueGreatness73 1 month ago
sounds like an internal combustion engine...
steammaniac314 1 month ago
just add a computerized fire extinguisher and ull be fine!
steammaniac314 1 month ago
Thought it was funny that I'm being called an idiot for supporting people who enjoy making things instead of you ignorant/low negative scum always having to be detrimental towards new ideas or fun. Can't stand reading peoples comments on YouTube, grow up, stop being so negative about life and continue to follow society and how it's shaped your "wonderful" views.
SpeedsCustom 1 month ago
this is my hobby allso , and have to say you did a splendid job on yours
randytosh 1 month ago
I came here to see some fire
that's all
MilindaX 1 month ago
A Hall effect transister - no sparking. Look up brushless motor. Look into the Lorenz force.
EmmittBrownBTTF1 1 month ago
For true alternative power. Watch Nassim Haramein and get your mind blown.
kroese1870 1 month ago
A 30 second ad on a 1 minute video? Shit pisses me off!
FreedomForYouAndMe 1 month ago
If somebody powers a lightbulb with free energy ill believe it.
cassius969 1 month ago
@cassius969 wait are u tht retarded millions of people have already done it some people are even starting to develop cars powerd by magnets... u.. u.. idiot!
MegaRuckaruckafan 1 month ago
@MegaRuckaruckafan yeah where are those devices powered by free energy? There are only scams in the internet where they sell plans to build such a device that does not work as advertized obviously. If somebody builds a free energy device the trucking companies are gonna be all over him. Those eastern Europe companies dont give a f if the energy giants are pissed off or not.
cassius969 1 month ago
@cassius969 You are a naive fool, look around stupid. Do you think any government doesn't like money? In case you havent noticed even if they didnt America runs the world, and they are very very very greedy. No money in this means no government interest.
ShadyRaider 1 month ago
@ShadyRaider There would be at the very least a criminal market for it and like I said somebody would try and use a free energy device for military purpose.
cassius969 1 month ago
We need funding for you!!!
nebadon85 2 months ago
What does "free energy" mean?
arxidoforos 2 months ago
@arxidoforos means it got out of jail.
linkuei83 2 months ago
@arxidoforos it means its free aka u dont nhave to pay for it o_O kids these days just dont get science...
MegaRuckaruckafan 1 month ago
Yah, I was thinking about wooden truck, and wooden truck cannot use metal, so its stealth and wooden truck, but wooden truck uses water and capacitors so that it stays stealth and lite weight.
ftlqed 2 months ago
I'm sorry, but it's just a motor, not a "generator". the system is known since more than century! :( What's new here? I don't see anything about overunity nor "free energy"! :( For overunity, always need to have an "out-put" and an "out-put" in terms both of power and to be able to calculate the efficiency of the system: "out-put" / "in-put" > 1.00, if not, means nothing :/ Sorry. Regards.
Khwartz 2 months ago 22
@Khwartz Well he did say he was just testing part of it. I mean anything forbid actually trying this semi scientifically right?
KaelasAskavi 1 month ago 2
@KaelasAskavi yeah, of course. But I'd like that non-professional that look at such vid don't confuse about what is going there ;)
Regards.
Khwartz 1 month ago
@Khwartz that's why it obviously says motor in the title?
OiHereticX 1 month ago
@OiHereticX yes! but "free energy" one, means that it would give in output, more power that it takes in input :/
Khwartz 1 month ago
@Khwartz if you read the description you'll find it very clear that this is not a generator. Nevertheless if the wheel rotates without consuming any energy then it should be no problem to hook it up with a generator and get the required output above 1.00.
If you've watched the previous models leading to this product then you'd understand the whole idea of this vid.
FreeRiderDZ 1 month ago
@FreeRiderDZ I DID (!) understood that was not a generator, and that's why I've argue for the use of the expression "free energy" in the title, that could only apply if use as generators (even if some call "motors" or "dynamo" presented and intended "free energy devices", like "Muller's dynamo".
Khwartz 1 month ago
@Khwartz it's true about the title, but considering the video as a part of a series of videos then it makes perfect sense. anyway if you look solely on this vid then you are right :)
FreeRiderDZ 1 month ago
@FreeRiderDZ Ok could be I understand even if I have no time for now to see the other vids: you mean that the intention and interest is about free energy, but that you recognize that is not yet achieved in this vid, that has no intention to say that was any way? Are we fully agree now? ;)
Khwartz 1 month ago
@Khwartz i guess we are ;)....
FreeRiderDZ 1 month ago
@FreeRiderDZ :)
Khwartz 1 month ago
@Khwartz
A generator is a motor with copper and magnets. If he can get the motor to spin for free then he can generate energy for free. It's called a dynamo. Look it up.
ShogaNinja 1 month ago
@ShogaNinja No, sorry, it could be a "motor (like) with copper and magnets", but a generator is not oblige neither to have copper nor magnet, just it could be like you said. Yes, when a generator use magnets and produce DC current, we are used to call it dynamo, but alternators and dynamo are often miss-used word. Remember: I'm trained electrician and have my own business in electricity ;)
For speed for free it's not sufficient, need torque too & so on, could drop otherwise.
Regards.
Khwartz 1 month ago
@Khwartz
It's a work in progress. A motor such as this, made larger, and spun up with electromagnets and fitted with copper and magnets can work. It may cost energy to get going but once in motion would power itself. Even if it only generates DC you just invert the DC to AC. This may be science fiction but one day it may be science fact. It starts with little experiments like this. A tiny alternator can power your entire car.
ShogaNinja 1 month ago
@ShogaNinja Ok, so, show me that, as it looks so easy for you and that you're so sure! ;)
I'm very about Free Energy indeed, but can have a long way before to reach overunity in the same kind of energy device (EM-EM). That is the challenge, because already have many "overunity devices", or more professionally COP>1 like heat pumps, wind turbine, solar panels, etc. COP is the ratio of the energy we want under the one it costs to us. Self-running system would achieve infinite COP ;)
Khwartz 1 month ago
@Khwartz Poor guy. Im feel sorry for you.
koolumbo4real 1 month ago
@koolumbo4real How much are you paid to put say that! lol any way, I'm not interest by your ch..ting comments and we will see who will laugh at last!
Khwartz 1 month ago
@Khwartz I hasnt been payed for this and i laught either. Why distrust? Ists just my opinion as you got yours.
koolumbo4real 1 month ago
@koolumbo4real Ok, but wha
Khwartz 1 month ago
@koolumbo4real Ok, but what is the problem here with me?! do you reproach me to distrust the video maker or the comment of ShogaNinja? in giving me you pity like you were the bright mind that could see the other from your highness to grant them like this?
I try to bring something constructive, in case you didn't notice: it's to bring rigour in experiments and their interpretation for free energy real benefit & make some people wining their time. What the problem with that & you?
Khwartz 1 month ago
Do you have tutorials for this?
OfficialJerla 2 months ago
/watch?v=5KIhDVLbMeY
Watch and learn before you waste any more of your life
Xero555000 2 months ago
make it so it push's it with magnetic power your letting the timing mechanism hit those 3 magnets you have on the motor you need to make it so they don't touch each other.
weedissafer 2 months ago
Seriously, you need to stop wasting your life on this. If you really want free energy go and buy a solar panel or two.
They're getting cheaper all the time, have no moving parts and even come with a 25 year warranty.
Why does youtube always lead me to these stupid videos? I started out looking for a Muse video clip FFS!
ffstibs 2 months ago
@ffstibs People like you are a waste of time.
SpeedsCustom 2 months ago 6
Comment removed
elcid282009 1 month ago
@SpeedsCustom - No he actually is right. These free energy videos are a joke. You can see a ton of them on youtube and none of them have led anywhere because you cannot create energy out of thin air.
karl75m 1 month ago
@SpeedsCustom And a waste of building materials, oxygen and bytes
g7txu 1 month ago
@ffstibs Good job. You recommend solar panels, something pretty inefficient, to people who are designing and inventing in their own free time. Fuck you Benjamin Franklin, just go buy a candle stick and stop wasting your life experimenting with alternatives.
Geechs 2 months ago
@Geechs I don't get the reference to Benjamin Franklin... Do you think he invented the lightbulb, or do you think he discovered electricity? because both are wrong.
TheResidentSkeptic 1 week ago
@ffstibs idiot
elcid282009 1 month ago
Mate you just keep getting them in. 133256 hits on this one. How many hits do you need to get before they will pay you for the ads? Serious question. I want in on the action.
QCTechnologies 3 months ago
This has been flagged as spam show
Shahin Electro Magnet Generator
We created new Alternatives to get our Electricity such as Fuel, Solar and Wind Generators; but No Fuel, Sun or wind means No Electricity.
Some created Magnet Generators as do-it-yourself Toys & Video Clips and asking for donations.
The Perfect Generator System that needs no Fuel, Sun or Wind to Supply Electricity is Shahin Electro Magnet Generator System whenever Electricity is needed with no Extra Costs to get Electricity.
Web: shahin-kadir.diytrade.com
ShahinGenerator 3 months ago
What does gravity have to do with magnetism?
"The turning of an iron and metal core creates magnetism in the center of the earth." - It also creates gravity too, funny that!
Yes but it only need to be moved into the field once if you use iron to block the attraction effect and it's reppled onto a circular object. You only have to think about it and apply some logic.
Archline2 3 months ago
@Archline2 Gravity is not created by the dynamo in the centre of the earth. Gravity is a force that exists between all objects which have a mass. If gravity was a function of our planets iron core then *all* objects would need such a core to have gravity. Something we can see is not the case simply by looking into the sky. Einstein explained that it's due to mass bending space-time.
Every put a block of iron onto a magnet?
Did it block the effect or just become an extension of the magnet?
mryellow123 3 months ago
@mryellow123 Gravity Is not created by the dynamo in the centre of the earth - True
But what is the dynamo at the center of the earth made of? Could it possibly be iron and does it not have a mass? Remember not once did I state it was only because of that but that is a big mass.
There's a person who has some special type of Iron or something and has managed to block it effects dont ask me how there's a vid on here somewhere showing it. If your that intrested I advise you look for it.
Archline2 3 months ago
@Archline2 Think I've had enough.... You can read back over my questions and discover for yourself where your thinking is breaking down.
mryellow123 3 months ago
@mryellow123 I see what you’re saying but a dyno involves direct friction between wheel and dyno and the shopping trolley you are physically moving yourself, no natural force is moving both for you. Both you could say are using a thermal energy source not just as a initiator but also as the sustainer, that's not the same in terms of magnetic force.
Archline2 3 months ago
@Archline2 No I'm not talking about the friction waste on the wheel.
The dynamo is a coil of wire and some magnets (not touching).
The light is the load.
Moving the wire through the magnetic field takes work because of this load.
The higher the load the harder the dynamo/generator is to turn.
Nothing to do with friction.
Force is force is force is force. Magnetic or otherwise. The force I put into the trolley is transfered via the magnetic field to the 2nd trolley. Equal work.
mryellow123 3 months ago
@mryellow123 Give up. You cant convince some people of what they don't want to believe no matter how much sense you make. some people just want to believe there is a simple and easy way, that for some reason hasn't been thought of yet, to get free energy
jonservo 3 months ago
@Archline2 [The turning of an iron and metal core creates magnetism in the center of the earth."] - "It also creates gravity too, funny that!"
No it doesn't. You only have to think about it and apply some logic. If it were spinning in the opposite direction, would it be creating anti-gravity? lol
TheResidentSkeptic 1 week ago
Stick a static coil in the middle so that it goes round the center axel but doesn't touch anything else, then stick a magnet to the axel so it is in the middle of the coil. Then hook the coil up to a battery and the clicker. See what happens? Seriously man I'm intrested in what the results would be? I reckon as long as the friction ain't too bad and the battery is decent and rechargeable it might be able to power itself.
Archline2 3 months ago
I am subscribing to you to see your progress! :)
MoviesAK 3 months ago
Wonder how well it would work on the dark side of the moon, free cooling and low resistance or maybe it would be weaker because the magnetic field of the moon is weaker? and where does the magnets get there energy and how much energy did it take to make em. not completely free.
mikestmp 3 months ago
@mikestmp magnets are not an energy source. Moon? righto....
mryellow123 3 months ago
watch it a powerful magnetic feild pressing againts another at rapid intervals does create friction
BelieveBlueVideos 3 months ago
put your tounge in it?
MrMichael0212 3 months ago 3
how did you make this? i'm doing a science project in school about free energy and i tried making this and it didn't work
BlocklandWorld 3 months ago
@BlocklandWorld If you want to pass science whatever you do don't start talking "free energy" garbage to any science teacher.
mryellow123 3 months ago
@mryellow123 And how do you know that?
BlocklandWorld 3 months ago
@BlocklandWorld Know what? That energy only changes form? Because all our knowledge of the universe confirms what we've learnt through our long history. If it turns out possible that energy can be created or destroyed, you can bet it ain't gunna be on someones desk with a few magnets and a switch.
mryellow123 3 months ago
@mryellow123 I know that science and actually playing with stuff breeds enlightenment and saying things like "what we know now is how it is" is certainly a pretty sure way of standing still rather than progressing. Saying it wont work and using history as a reason is like saying "don't try and cross the ocean because the world is flat" 400 years ago, it's certainly isn't the case now and wasn't the case then.
Archline2 3 months ago
@Archline2 This all sounds wonderful and is a great way of making people seem "close minded" however it's akin to a person who believes the world is flat telling Columbus "You're just blinded because you were told lies, disinfo agent! There is no America!"
mryellow123 3 months ago
He's admitted there is an external source plugged into this but what you have to do is say well ok this is spinning what happens if I turn it into an alternator to source itself, not hard. Then how do I make it more efficient. Without asking and exploring these and other possibilities you will always come to the conclusion that its impossible, then you will never progress. You know science should never be dictated, it should be explored like the world was explored centuries ago.
Archline2 3 months ago
@Archline2 A powered "magnet motor" as a generator is simply a "transformer" it changes the amps/volts but no energy is created. Really effective technique for fooling people.
mryellow123 3 months ago
@mryellow123 I see volts and amps being transferred into a spinning movement using magnets. The question remains can that be refined using better/frictionless bearing and heat resistance materials to make it efficient enough to replace those amps and volts that made that movement and create surplus. I'm not saying it works I'm saying can it be made to work? It’s not saying it is, it’s saying what if? That difference between an open and closed mind.
Archline2 3 months ago
@Archline2 The answer is "no it can't". Yay for the "close minded" line coming up for the 2nd time.
mryellow123 3 months ago
@Archline2 lets look at this again....
Lets say you can design a 100% frictionless device (good luck) which accepts powered input and turns a load to generate power.
You say "create surplus".
Where would you say a "surplus" of energy could come from in this or any other configuration? The fly-wheel effect of the whole thing is simply stored energy from the input.... So where would you get this surplus? What is this "it can work in theory" thing you talk of?
mryellow123 3 months ago
@mryellow123 Ok dude I'm not here to educate you on the way the world works.
"Magnetic Ball Bearings" are low friction, not frictionless though. Imput is feeded from a replusion effect of magnets which doesn't cost energy per part apart from making the magnets. Some also theorise that tides are influenced by gravitational forces of the moon and the sun. Some also theorise gravitational forces are apart of magnetics and the way the earth spins. It's all on the net buddy go read it!
Archline2 3 months ago
@Archline2 How does a magnet repel another without being moved into the field by the use of energy?
Some theorise the moon effects tides? oh man... Did you think that might be a revelation to me?
What does gravity have to do with magnetism?
mryellow123 3 months ago
@mryellow123 So if it only needs to be moved into the field once and it makes more energy than it consumes it will also make back the energy it took to move it into the field. That's just simple logic.
Archline2 3 months ago
@Archline2 Lets say I have a 2 magnets on trolleys I can push around.
I move the first 2 feet to the left.
The 2nd moves 2 feet to the left.
How much work was done on the 2nd magnet?
Is it the same amount of work I put into the 1st magnet?
mryellow123 3 months ago
@Archline2 Think what you miss is that it takes work to turn a generator under load.
Try this experiment.
On the open highway, accelerate in your car with all the gadgets switched off.
Now turn on the air-con, the DVD player, the head-lights, and charge your phone.
Why didn't you accelerate as quickly?
Ever rode a bike with a dynamo generator for the headlight?
Why is it harder to peddal with the light on?
mryellow123 3 months ago
Now you can either sit there and say its impossible, just like a roman might say its impossible to cook food with out fire (microwave) or you can go learn it for yourself.
Archline2 3 months ago
@BlocklandWorld These magnet motors are just a trick of perception more then anything, perpetual motion devices have been around for centuries and they never work. They are generally simple highly efficient machines, always losing small amounts of energy as heat/light/noise/etc. In other cases needing constant input of small amounts of energy. Often the input is obfuscated so without looking deeper it appears to be "coming from nowhere" but is always some external source.
mryellow123 3 months ago
@mryellow123 I see no reason why it can't work, at least in theory. One guy claims he has made such a machine "torian III" type it in search. If you base your theories on other age old theories like thermodynamics then maybe you should be looking at the steam engine page or just bury your head in the sand because I fail to see how magnetic fields have anything to do with heat exchanges, I don't know why people are referencing it to this, this is electro-magnetic dynamics not thermo.
Archline2 3 months ago
@Archline2 People who claim to have built working perpetual motion devices or free energy generators are exclusively scammers and never demonstrate a truly functioning device. There is a MASSIVE difference between a "law" and a "theory". Why are people talking about heat? Because heat is one form of energy, noise is another, when a machine makes heat or noise that is inefficiencies immediately apparent to the observer. Magnetism is not a form of energy.
mryellow123 3 months ago
@mryellow123 I didn't say magnetism was a form of energy, it's a natural force a bit like the waves on the ocean is a natural force :-D. Heat and noise is something that can be reduced with refinement. Laws and theories are man made they too are often prove true or false by refinement.
Archline2 3 months ago
@Archline2 waves in the ocean in no way resemble magnetism.
mryellow123 3 months ago
This has been flagged as spam show
@mryellow123 "waves in the ocean in no way resemble magnetism." I'm not saying they do.
Archline2 3 months ago
1:13 for some Fiya!
rahxephon52 4 months ago
Do you know what a RELAY IS ??
How about a hall effect timing device or you could use light beam interruption all are relatively cheap can get the parts at local electronics store may need to look the designs up on the web first to understand them though :-)
Risenangelicaegis 4 months ago
It's free energy if you steal the current form your neigbor. You reinvent a motor.
Calculate the Work you put into it. And than how much do you get out. You will see you put more in than you get out.
boecki 4 months ago
Why perpetual motion can never exist:
1. It doesn't work
2. It sets itself on fire when it does
But seriously, keep trying, it looks great.
FreshApplePieOnXBL 4 months ago
LET ME MAKE ONE SERIOUS POINT. IT WAS RUNNING BY ITSELF AFTER YOU UN PLUGED IT.. SO YOU DID IT .. IT RAN WITHOUT THE PLUG IN
umakeitupdickhead 4 months ago
the thing that hit me is that functions similar to a tattoo machine, maybe try using an armature bar, spring, points, and contact screw for a tattoo machine, they might not use quite as much power but i'm sure they can handle much more rpm than what you're needing
cybrmniac 4 months ago
worth it, just for the fire
lunarshift 4 months ago
so this is how tazers produce their electricity...
Thomotron 4 months ago
you need to use a hall effect sensor and a good mosfet for this, it would be much much more reliable and effective and it wouldn't be easier to wire and implement than the mechanical setup you have done here
ki4hou 4 months ago
Friction, Sparks and wood.....NO SHIT!!!
gallomex13 4 months ago
Of course they make the holder out of wood. LOL
limeffdd 4 months ago
Electric fire starter? I like it. It's kinda neat.
Bet it interferes with radio too - can it block cell phones?
fluffymcdeath 5 months ago
sorry but this is just stupid. there is not even the slightest potential for free energy from this or any design similar to this. All you did was build an electrical motor. energy input with out energy out put.
lostinthewoods1026 5 months ago
@lostinthewoods1026 If all that is input to it is his hand giving it that first push, and then It picks up speed and starts generating, then it is nearly free and very cheap and safe.
SeanRamey 5 months ago
@SeanRamey No, it's not free, it's using the energy stored in the magnetic fields of the magnets. Fields which cost energy to produce and which get weaker as you use them. . .
WNxFish 4 months ago
@SeanRamey All he has done is build an electric motor. The concept is simple and is not new what so ever. There are different levels of efficiancy however this is not a generator. It is using electricity as an input, with no electrical output. Any electrical output would come from what is esecially an alternator, which would put drag on the system slowing down the motor or increasing input energy by a greater amount than the output to maintain spinning. Look up "electrical brush motors".
lostinthewoods1026 4 months ago
@SeanRamey Clearly it's safe when it catches on fire. Clearly it's free when it's connected to power to keep it going.
tylerbrainerd 4 months ago in playlist Videos from jzsd14me
/watch?v=raQWOVN098k
i watched this vid and im no expert but there is no wires at all just magnots and its working i think this is legit check it out
islandboiitsi 5 months ago
wonder if w w w diymagneticmotor com works well???___ some free energy ?
kimkim1199 5 months ago
7 people burned their house down and disliked the video
yomyssebyy2 5 months ago
Make the casing metal or rubber or something
rahkshifan99 5 months ago
dude they do make magnetic switches. look in radio shack or ebay
wcemichael 5 months ago
Ooh, interesting point here. If someone *did* somehow create a perpetual motion machine, would it fry itself instantly due to the imbalance of power? I'm honestly curious.
ductTapeDJ 5 months ago
i think this might work, it just needs some liquid nitrogen ot liquid helium in a case for ot keep cool
valdezmj10 5 months ago
That huge arc is taking electricity to create. So its not "Free" Energy
supramanz 6 months ago
cool stuff!!! :)
AlexLoveTrance1 6 months ago
magnetic reed switch perhaps?
Animeabe 6 months ago
this is awesome. thanks for sitting down with me and explaining your design. i will be following your progress very closely.
joshhunt2011 6 months ago
have you considered an electronic switch instead of a mechanical one? Btw Amazing project =)
rro866 6 months ago
Conservation of energy is a basic law of the universe... sparks= electricity and light energy escaping from the system, so this can't be claming to be perpetual motion, what does it run on?
sloosh6000 6 months ago
You need to collect that back emf rather then wasted! Here is how" Put a high power bridge diode rectifier 2 of the ac in puts on that sparking switch then other end of the br diodes has to be connected to a 50v 10,000 MF (or so) capacitor, then you will be amazed how much back emf you will be able to collect. If you need a further help? Drop me line man and I send you drawing how to do that.
mksboysal 6 months ago
can somebody explain this to me? so basically the wheel revolves by the help of magnets and a li'l help from electricity that is actually produced from the wheel itself, like of that wind turbine thing? so basically this machine produce more work or energy than they consume? awesome!!
ItlogNaEgg 6 months ago
So... Rube Goldberg plays a Pan Flute nowadays?
frankenstein with the neck bolts screams whilst busting down the door "Fire! arrRRRrnnngghh FIRE FIRE !!"
DancingSpiderman 6 months ago
since you use a mechanism which uses a battery to trigger the magnets ... you put in more energy that you get out. because once the batts are out (outside interference) the device slows down, because if friction and the fact your using magnets. srsly man go and take some physics classes ... its embarassing to watch this. nice goal actually but not possible, like travel at lightspeed which isnt possible.
grindkerensky 6 months ago
Hopefully you can find a way to stop it from catching on fire.
ZeVeegee 6 months ago
Eff you physics! We don't need your laws!
MjrTom2009 6 months ago
free energy? fuck physics!
320005397 6 months ago
Sei un grande, ma i fili dove gli attacco ?
motomnbvc 6 months ago
Seth Rogen at 1:21!
BustinCapsErDay 6 months ago
I've come up with a design that works and I must say... exciting times. I hope lots of people figure out a way so we can all stop paying for hydro.
SeaBreeze90 7 months ago
very clever , very nice....best 1 I have seen yet guy... nice 1
Thom in Scotland.
fuelban 7 months ago
why there was a fire?
abdzibdeh 7 months ago
@abdzibdeh friction
mystery264 6 months ago
Respond to this video... qw
mystery264 6 months ago
Can you use a relay for your switching mechanism, so you don't have to have much current going through the switch.
colsovsky 7 months ago