Added: 3 years ago
From: Mortalitus93
Views: 11,976
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (129)

Sign In or Sign Up now to post a comment!
  • It worked! Thank you so much!

    Oddly enough the folder was 0015 (as stated by zarteen) the first binary was already set to 00, and the two "new" binaries were already there, only they were set to 00 instead of 01. Again, thank you so much!! :)

  • I love you

  • OH MY GOD THANK YOU SO FKNNNNNNNNNNNNNNNNNNNNNNNNNNNN­NNNNN MUCH I SPEND SO LONG TRYING TO FIND DRIVERS...YOU'RE A GENIUS THANKYOU SO MUCH !!!!!!!!!!!!!!!!!!!

  • :):)P:

  • YES! It worked! I was trying to get stereo mix for a while! Thank You!

  • I did it and got it but now it won't let my mic work

  • Worked first time, thank you very much!!

  • YES! Thank you so so much! Remember, guys, when you get to the 0000 folders, just find the one with a plus next to it, that leads to another folder named Settings. It doesn't have to be 0005 or 0009. (Mine was 0015.)

    Thank you again! So so much, I went through seven layers of hell trying to get this to work. :D

  • @zarteen 0015 on mine too, but the two binaries i was supposed to make were already there (i just had to change them from 0000 00 to 0000 01)

  • @midimachine

    Wanna hear something funny, though? I got a new PC with Windows 7 on it shortly after this. Pointless work ftw! :D

  • Only video that worked!!!! I LOVE YOU MAN <3 And i love your background!

  • Hmm this caused my audio to not work entirlely, after I rebooted apparently The Sigmatel Audio Codec Vanished from the device manager and Was Replaced By An IDT High Defintion Audio Codec, and everytime I try to install the drivers, A Code 10 error comes up.

  • awesome!!!! it worked!!! thank you sooo muchhh!!!

  • i don`t have connselector and my is 0015

  • I did what you did, i only managed to get Input Monitor but no Stereo Mix

  • i have a windows xp dell xps 400... i did everything u said step by step...still doesnt work!!!

  • Thanks!

  • Worked! Thank you so much!

  • mine didnt work i did everything u said . reply back

  • Mine is available; I've clicked on Stereo Mix and turned the gain up; but on both of my Dimension 9200's they never recorded the PC's sound! Help please! If I plug a Mic into the front / rear plug, and turn it off on Audacity, then boost the sound up 20dB, I can hear the PC sounds quite low.

  • Mine is strange. When I record it in Audacity (before the video, like normal) You can hear nothing in Stereo Mix mode, but if I boost up the volume loads, you can hear fuck loads of noise but faintly the sounds in the background.

    After making DigitalInputMonitor as 01, it disabled all my Sound card properties which meaned I had to change it back to 00. (I created it in the first place.)

    Mine seems to be a mix-up, the Stereo Mix is there, but it isn't doing it's job..

  • sexy thnx a lot dude worked like a charm

  • After Settings, i don't see Filter and Rear only seeing: DevType_0262_SS173410bb and Drv5242_DevType_0262_SS173410b­b

  • Doesn't work if the rear folder isn't in the 005 file. It shows up in my 009 and I followed tut word by word but still no stereo mix. FML.

  • work for me.Thx

  • 1:30 - 0017 worked for me.....

    tHANKS for posting this!

  • i upgraded my xp to 7. what do i do?

  • I have XP, a Dell, and SigmaTel

    this didn't work at all

  • It works thank you! :DD

  • i like pie too! :)

  • worked first time :o)

    vostro 1500 dell laptop with XP pro

    thankyou :D

  • I have a Stereo mix option on my SigmaTel Audio Card in my Dell since the start, but it just won't record any sounds the PC is making in Audacity or anything.

    Got any ideas? (Reinstalling is a no-option, I've did it before)

  • This was a great help, followed instructions exactly and it worked! Finally I can upload video game stuff, except this laptop sucks... oh well

  • i followed exactly your instructions did everything, except i did in 0009, and when it came to creating a second binary value, the digitalstereomix, there was a digitalstereomix already so i left it there and restarted comp. but checked and i still didnt have stereomix

  • mortalitus i already digitalstereomix in my binary value list in the blah blah blah. so i left it there and restarted comp and i dont have stereo mix D: any ideas?

  • i dont have a 0005 or a 0009 it only works on 0008

  • GREAT JOB I've been working on this problem for longer than my Ego cares to admit,,,,, He Has Got It ,,,IT WORKS!!! Just follow his instructions Exactly,,,

    Gateway Laptop Sigmatel Chip

  • Comment removed

  • D: i did everything,but i only got Input Moniter and not Stereo Mix. If you could maybe PM me with a solution if you know one,that would be great.

  • It didn't work for me, but maybe my computer's just too old for this to work.

    Case in point, while looking over the vid, you have a lot more items in that specific registry folder than I do. Oh well. I guess it just wasn't meant to be.

  • i don't have 0005

  • THank you so much..your ttorial was superb and my soundcard is orking again... many thanks

  • how to change the word at the start button instead of the boring 'start'?

  • LoL I love ur start menu button. =)

  • Well, who doesn't like pie? :p

  • @Mortalitus93 hwd u do dat

  • ummm how do u get the MasterControlsIndependentMixer­Inputs???It wasn't on my computer,and I followed your instructions perfectly....

    tell me if i did something wrong if i don't see that file...

  • or can i make a binary with that?

  • You could try it if you wanted to. There is no guarantee it would work, but I don't see how it could mess up your computer.  It's editing existing binaries that can be potentially dangerous.

  • I tried it,and it worked perfectly! Now I got stereomix availible on my computer!

  • Glad it worked. :)

  • wow that is bullshit! it only works with XP? Jesus i hate vista so much, its like they didn't want most programs to work with eh damn thing!

  • Sorry dude. Vista tends to do that. My friend switched when I tried to tell him not to, and now all of his $200 + of software are garbage.

  • This does work but, i have to re-do this like very 6 months it might be my computer problem, but hey it works

  • But I have a question... When I try to record using Stereo Mix, it records every sound of the computer (it's fine), but with a VERY low volume =/

    I turned it to max, but it still records with low volume. Do you know how to fix this?

  • It may just be the program you are using to try and record with. What is the program you are using?

    And I apologize for the late response.

  • I tried GoldWave and Audacity. But they record in the same volume.

    And no problem.

  • I tried to look it up, but most people thought it was just a computability error or a program error. I'm not really to familiar with sound cards and solutions for their problems.

    It just took me forever to figure out how to enable it myself, and when I finally found out a tutorial, I put it on youtube so it would be easier to find; I did not make this up on my own.

    I apologize for not being able to help, but I suggest researching with google (it's how I found out how to enable Stereo Mix)

  • @Mortalitus93 i done exactly what you said but it didnt work i restarted my computer and i checked on the registry again but i went on control panel and went on that properties thing then recording and it wasnt there "STEREO MIX" i don't know why can u try and help?

  • yes me too HELP?

  • @YoshiFanGM You need to turn up the volume from your speakers, if it bother other people around you just plug in headphones but don't wear them

  • @cleancookie97 That's exactly what I've been doing with it xD

    When I want to record something, I connect my headphones first and I don't wear them, turning the volume to max, so that it can record with a "normal" volume.

  • Hey! THANKS A LOT for telling us how to enable Stereo Mixer!! :D It worked for me... really. I was searching how to do this for long ago, but it now works! Thanks :D Well, my sound driver is IDT Audio, but I think that it's an updated version of SigmaTel Audio.

  • It doesn't work for me :( I have Dell Demension C521 and I turned enabledinputmonitor to 01, all others were where they should be and i restarted and it still wasnt there :(

  • omfg u did it after 5 minutes.

    INSTRUCTION FOR XP

    GO TO SOUNDS>(little speaker near time on the task bar)>OPTIONS>SETTINGS>CHOOSE AUDIO INPUT>CHECK STEREO MIX> UNCHECK MUTE STEREO MIX.

    done. length time to do this maybe 15 seconds.

  • This video is for people without stereo mix that want to have it. I don't think those instructions work unless you already have it; yours just unmute it if it's already there.

  • Wow. I've researched this problem for years, and I found a working solution on YouTube of all places. Although it was in 0009 rather than 0005 (Dimension E521), it worked perfectly. Thank you so much.

  • Yea, I have dimension E520, and it was under 0009 (See below), but at least it works :D

    Must be the model, that causes it to be in 0009

  • I'm glad it worked. Maybe I should put it in my description that it works with 0009 and 0005. Hopefully it works with every computer that has it in 0009.

  • Mate, you are a legend!

    It wasn't under 0005 for me it was under 0009, but I still went though, and now my fraps videos have sound instead of just video!

    Thank you!

    PIZZAROX2920

    A.k.a

    [MM]Tee_Hee

  • Ok I found out what happened after I tried it. Input Monitor is now an option in the playback list. Im not sure what it does though....

  • I've tried it but it won't work. When I did the instructions, it turned out that there was already a binary value called DigitalStereoMix with teh same value setting. But when I look at the properties, there is no option called Stereo Mix. Just Line In and Microphone.....please help :(

  • Imma doin it right now....ill come back with the results :D

  • thank you so much man now i can finally use camtasia fully 5 stars man great job

  • Guys Some of u Dont have to do This.

    Sadly It didnt Work ether.

    I Think that For the PEOPLE that dont have STEREO MIx ion Sigma Tel Audio

    Is it could be OUTdated. U can Go to Ether gateway, DELL ect. UU have.

    and Put YOUR serial in and IT give yo a LISt of Updated SOFWARES FOR YOUR PC!!!!!!!

    :}

  • Thanks so much, worked perfectly! Nice vid, too

  • Can't tell you how much this helped me, thanks a lot

  • Fuck man, this fucking work, for real dude i kill my brain 2 days to do this shit man jesus.

    God bless You

  • Uh.... thanks.

  • I followed it to the letter.

    Still don't have stereo mix : /

  • ai dude wat computer u have

  • A Dimension C521 Dell.

  • yeah dude dell xp with intel Pentium d's sigmatel dosent work so write that in the discription cuz people are wating time with this

  • i can't find the first binary that you changed, i'm sure i'm in the right place though. does it have any other names?

  • I'm not too sure. You could always try to add that binary if it is not already there. I can't see what harm it could do.

  • Happy Face, it worked :) thanks dude.

  • thank you!! i love you! kiss me!

  • Your welcome

    ..... but I think we'll have to schedule the kiss for another day.

  • in 0005 i have BoardSetting.

  • IT WORKS!!! omfg

    got my laptop in 06 and i have never been able to record pc audio. now i can!!!!

  • Glad it worked.  : )

  • Okay, so if anyone else stumbles across the video and has Vista, just click on the Video Response.

    Ask all Vista questions in the Vista video though, not this one.

  • i have vista how can i make it work with vista or do u no where i can find it?

  • You can't make it work with Vista, and I do not know where you can find help.

    Sorry dude. :(

  • Watch my Video! I just explained how to do That, ;)

  • it didn't work

  • Don't why it hasn't been working for people...... Earlier it seemed to be working for everybody.

    Are you sure you had XP, the same sound card, and the same exact file paths as me? Only thing I can think of.

  • fuckin vista i hate it BLURGGG

  • Comment removed

  • Doesn't work

  • Are you sure you had the same registry paths as me?

  • i think so

  • folowed it exactly. restarted comp. don't got it =/

  • You had the same registry paths, right?

  • whats a registry path? I followed this exactly. not a single thing was different on my computer to this =/ Aw well..

  • Sorry dude. Don't know what could have happened. :(

  • It didn't work T_T

  • I'm sorry for commenting an old video, but My card is Sigmatel High Definition Audio Codec or something like that. It's actually folder 25, I am going to take a big gamble because it actually says driver and settings unlike my 8. It might help other people, it might screw them over, Cheers and wish me luck.

  • i did everything right up to "restart your computer" but i can't find the stereo mix check box afterwards.. i see the other 3..

  • me too

  • Comment removed

  • For some reason, my videos have been randomly saying "Comment removed by author". If this happened to your comment, I am sorry, but this continuously happens randomly.

    I have not removed any comments from any of my videos intentionally.

  • hi - - from another video I got the stereo mix to appear but line-in is horribly distorted with early clipping sounds.

    playback of stuff is fine. What might be botched and how might it be fixed?

  • The same thing happened with me on my other computer. Sigma Tel Audio works much better for me. Line-in, I have not had very much luck with.

    Either turn down the volume on Stereo Mix to see if that helps, or simply find a better sound card. I am not sure if there is a simple "fix" for bad sound quality. Sorry. :(

  • Comment removed

  • Worked perfectly for me, nice work

  • Thanks.

  • you just skip my question? -sigh-

  • Sorry dude. Something weird was happening with my comments last night, and it said your comment was removed when it really wasn't.

    But this is most likely because you have a different OS, a different version of Sigma Tel Audio, or a different sound card entirely.

    You are having different registry paths then I do. My only suggestion would be to look for help for your OS/sound card. Sorry. :(

  • Ah, i see. Thats too bad ive been trying to get this damed thing to work. Thanks anyways for you time 5/5 just because im nice

  • When i get to 0005/settings there is no filter. do you know whats wrong??

  • When you get to the 1:43 my MasterControlsIndependentMixer­Inputs is replaced by MasterMute.

    Is that the same thing? It looks similar.

  • It could possibly be the same thing. It's your risk to take though, you probably know how dangerous it can be when you are editing your registry.

    I don't know though. Probably means you have a different version or different sound card entirely. This sound card came as default for my Dell Dimension C521

  • how do you check what sound card you have got

  • Go to the control panel -> sounds, speech, and audio devices -> adjust the system volume.

    It should say at the top.

  • it doesnt for me...is there another way?

  • Nor for me either

  • Will it work on a Toshiba laptop?

  • Probably not. The sound card for you laptop will probably have a different registry than the one on a PC up there. But who knows?

    If you do not have the same file paths as me, then no, it will not work.

  • at 1:30 it says 0005 and go to setting my only says driver....but under 0009 it says settings what do i do?

  • This means that you have a different version of the sound card, a different sound card entirely, or a different OS than me. You need to either get the sound card I have, or look for a tutorial on the one you have. Sorry about that.

  • Thank you dude! It works! 5 stars, fave, and sub!

  • the audio thung dont come up ??? wtf ?

  • What do you mean by the audio thing?

  • if he means what i had, then what he means is after it is done and you have restarted cpu the drivers for sigmaTel become corrupt and you lose all sound and it isn't easy to reinstall i had to system restore.

  • the same happened to me when I tried to download a new version of SigmaTel. I just used System Restore.

    You must have not edited the registry correctly then. That is what it sounds like is happening. system restore should work.

  • tar i gonna restart my computer now ans see if it works !!

  • DUDE I COULD DO WITH SME help i cant find anythink on what is in your video nothing comes up :S when i type regedit

  • It is because you have a different sound card or system them me. What sound card do you have?

  • how did you change the start thing

  • I did alll this in another tutorial it never worked

  • thank you so much helped me out so much i think im going to go buy a soundblaster or somthing sigmatel is sorta garbage i had stereo mixer 10 mins ago windows update... no stereo mixer .

    5************

  • nvm it works

  • omg! i was looking all night and i found one that works!!! i have a dell inspiron 1520 with xp! it works!! all i had to do after resarting was reinstalling the driver and it works fine!!! thx!

  • No problem.

  • I can only do drivers :s

    please help!!!

  • What do you mean by you can only do drivers?

  • I'm having the same problem. He means when it gets to the part where you're supposed to click settings, you know how the Driver and Setting tabs come down, all we can open is the Driver tab, there isn't even a settings tab.

  • Oh, I see. If you are not having the same folders as me in the registry, than this means that you are not using the same sound program as me.

    I may need to add this to the video, but I am using the Sigma Tel Audio sound card.  I am not familiar with the registry paths of other sound programs, so I will not be able to help you there.

    My only suggestions would be to download Sigma Tel Audio, or to continue to look for help elsewhere.

  • Thanks man!

  • I dont have a dell :.(

  • Might still work. If you can find that registry path, then it will work. But some computers brands have different paths. It's worth a try, but if the file paths are different, then don't try it. It could screw up your computer.

  • Oh! It worked! Thanks! :D LOL 5/5

  • No problem. : )

  • +Open registry editor

    +Navigate to: HKEY_LOCAL_MACHINE--> SYSTEM--> CurrentControl001 -->

    Control --> Class--> {4D36E96C-E325-11CE BFC1-08002BE10318}--> 0005--> Settings--> filter--> rear

    +Now change the hex values of MasterControlsIndependentMixer­Inputs from 01 --> 00

    +If necessary, change the hex values of EnableInputMonitor from 00 to 01.

    +Now create two binary values, one named DigitalInputMonitor and DigitalStereoMix. Give them both a hex value of 01. Restart and turn up stereo mix volume

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more