@Megalodon64 It's usually attributed to computer control and the way the wing flaps work. on the wing flaps their are actually 2 flaps, one on top of the other, one moves up and the other moves down to control yaw. they both move up or down together to control roll and pitch
i love this plane this was the first one i made and it flies great (plus my fav plane in the US military is the B-2) but i just drop it if i try tossing it in any way it will just head strait for the floor
@bombersander sounds like a printer problem, you can put a piece of paper on your monitor and sketch out the design, honestly the P 38 flies better then this one.
@durdyll i did, i designed about 20 of them, i just posted a video of a P 51 mustang with a rubber band powered motor and should have a few more posted soon. thanks for watching.
@SweetCrack187 purely for stability, I didn't want to add one, and i tried to make the canopy act like a tail, but it just wasn't enough during loops. it will fly without it, but not as well since it isn't computer controlled like the real thing.
@taoistflyer Make the vertical stabilizer out of clear plastic, such as the plastic packaging common on many products. that will give the right look, yet maintain the stability
Helo.... Great... paper plane.. I love a paper plane too... I want just a share... I found a great FLYING paper plane on internet . This is about How to make a paper airplane...this is only modern military airplane.. It has good shape like real aircraft...There are 8 models : F-16, F-18, F-14, Eurofighter typhoon, F4 Phantom, F-15, Mig 29 and sukhoi Su 27....I think this model have good shape and good on flying .... visit here : w w w dot howtomakepaperairplane dot blogspot dot com
@naiils Thanks. I wanted a tiny paper airplane one day and couldn't find anything like em online so i had to start making my own, i tried to cover all the classics.
@Silverfang15 I've used glue on them and it does work as long as you don't use to much, tape is a lot quicker though, you don't have to weight fo it to dry.
@milqn4o I use normal printer paper like you, it is important on the B2 to have the front edge of the wings folded over, it acts like a brace, if it's just a flat wing it will flap around. Also it helps to push the wings against a round pen so that you can give them a little bit of a classic airfoil shape, this also helps support the wings and keep them straight.
don't make the wingspan to much wider then 4 inches unless you use thicker paper, the B2 isn't the best but it can fly.
some of them loop better then others, the blue angle and the p38 are really good at looping, you need to bend the tail up just right to make it loop it takes a little practice but most of them can loop, this one can't loop though
@taoistflyer my b2 can loop! i just bent the flaps and threw it hard and it loop two times.i am gona try two paper and put it together.the body and wing will be strong so that the b 2 can loop more than 2 times i thing.
instead of downloading it when it shows it on the screen go to full size veiw wait a couple seconds then press the button called Prt Scrn or something like it (its above the arrow keys) then go to paint edit paste downsize to whatever you want then print it works really well
a answer of this is my b2 bomber version that is better in colour, i can do the avro vulcan, i can do it in different paintjobs, but i think that i will make the camo normal.
I know, that's what I thought when I was dun making the first one. it's actually a real picture of a b2 that is cut up, so the colors are real, they just don't look black enough because of the lighting in the original picture.
The one in the bottom left corner is a p 51 mustang, it's a little different then the rest, it is a little more 3d, and it is rubber band powered, but the rubber band power is more for show then flight.
how does the real one fly without a tail?
Megalodon64 2 months ago in playlist Sub micro paper airplanes
@Megalodon64 It's usually attributed to computer control and the way the wing flaps work. on the wing flaps their are actually 2 flaps, one on top of the other, one moves up and the other moves down to control yaw. they both move up or down together to control roll and pitch
taoistflyer 2 months ago
Thumbs up if you want to see him actually fly it!
DGenerationX256 2 months ago
Were do I go to print plane
DillonWS 6 months ago
@DillonWS click the first link in the description, then click where it says click for printable version.
taoistflyer 6 months ago
i love this plane this was the first one i made and it flies great (plus my fav plane in the US military is the B-2) but i just drop it if i try tossing it in any way it will just head strait for the floor
swordslasher299 6 months ago
sisers
noeljerry94 7 months ago
IT SUCKS.and than again it's okay
noeljerry94 7 months ago
how do u throw it @taoistflyer
taby448 7 months ago
@taby448 this one i just lighlty toss to make glid, and i throw it up and at an angle to make it loop back to me.
taoistflyer 7 months ago
@taoistflyer ok
taby448 7 months ago
i tried printing it and it didn't work!!!!!!!!!!!!!!!!!
i lost like half a liter of ink!!
bombersander 8 months ago
@bombersander sounds like a printer problem, you can put a piece of paper on your monitor and sketch out the design, honestly the P 38 flies better then this one.
taoistflyer 7 months ago
i get lost at 2:06 can someone help me?
lasamoostang 8 months ago
@lasamoostang that's just me rolling up the 2 triangles at the front to make nose weights, then i just tape it together.
taoistflyer 8 months ago
It can't fly
armandausin 8 months ago
@armandausin it takes some tweaking of the flaps and nose weight to make it fly, but i have others that fly better, check out the p 38 or the yf 23
taoistflyer 8 months ago
I used to make planes like that all the time! Until we had a dog..
AlbertLloydy 9 months ago
did you create these
durdyll 9 months ago
@durdyll i did, i designed about 20 of them, i just posted a video of a P 51 mustang with a rubber band powered motor and should have a few more posted soon. thanks for watching.
taoistflyer 9 months ago
do u make these out of printer paper?
pokematt99 1 year ago
i love your videos but can you please give me the links to the other planes
MG6748 1 year ago
@MG6748 in the video description i have links to all the planes that I have posted online.
taoistflyer 1 year ago
@taoistflyer thank you
MG6748 1 year ago
oye porque aceleran el video porque no lo dejan en velocidad normal
daniel2468si 1 year ago
will it work on normal paper????
medo007black 1 year ago
@SweetCrack187 purely for stability, I didn't want to add one, and i tried to make the canopy act like a tail, but it just wasn't enough during loops. it will fly without it, but not as well since it isn't computer controlled like the real thing.
taoistflyer 1 year ago
@taoistflyer Make the vertical stabilizer out of clear plastic, such as the plastic packaging common on many products. that will give the right look, yet maintain the stability
simmonstwopointzero 1 year ago 2
@simmonstwopointzero that's not a bad idea, i may try that. thank you.
taoistflyer 11 months ago
Theres only one question......Will It Blend?
joyby662 1 year ago
what kind of papper?
THEbestGman 1 year ago
OMG.. it actualy does a great job :)
jaytjuh575 1 year ago
How can I cut the video screen
SayamPatel356 1 year ago
Comment removed
q10800 1 year ago
yea that cute babe,,,,
NiGhtKids1982 1 year ago
i would wonder how you would react if someone just crushed all of those planes
henrybear123 1 year ago 14
to fast
TheTbone285 1 year ago
can u please speak in ur videos
sonicboom592 1 year ago
Helo.... Great... paper plane.. I love a paper plane too... I want just a share... I found a great FLYING paper plane on internet . This is about How to make a paper airplane...this is only modern military airplane.. It has good shape like real aircraft...There are 8 models : F-16, F-18, F-14, Eurofighter typhoon, F4 Phantom, F-15, Mig 29 and sukhoi Su 27....I think this model have good shape and good on flying .... visit here : w w w dot howtomakepaperairplane dot blogspot dot com
beritasaya 1 year ago
will it come back?
FatManScoop1100 1 year ago
@FatManScoop1100 it can but not very well, just getting it to fly was the hard part, i have made it loop before, but it glides much better.
taoistflyer 1 year ago
fuck mate dont you have a big coleckshon
naiils 1 year ago
@naiils Thanks. I wanted a tiny paper airplane one day and couldn't find anything like em online so i had to start making my own, i tried to cover all the classics.
taoistflyer 1 year ago
will glue work?
FatManScoop1100 1 year ago
@FatManScoop1100 glue is kinda heavy, so I doubt it would fly if you used glue.
Silverfang15 1 year ago
@Silverfang15 I've used glue on them and it does work as long as you don't use to much, tape is a lot quicker though, you don't have to weight fo it to dry.
taoistflyer 1 year ago
does it fly...:/
morgsta345 1 year ago
man first of all my printer isnt with colors its black and white .. ok but how do u make them so strong cuz i make em with printer paper
what do u do them with ??
milqn4o 1 year ago
@milqn4o I use normal printer paper like you, it is important on the B2 to have the front edge of the wings folded over, it acts like a brace, if it's just a flat wing it will flap around. Also it helps to push the wings against a round pen so that you can give them a little bit of a classic airfoil shape, this also helps support the wings and keep them straight.
don't make the wingspan to much wider then 4 inches unless you use thicker paper, the B2 isn't the best but it can fly.
taoistflyer 1 year ago
@taoistflyer hmm it looks like carboard idk why and the front parts i cant make em right ...
milqn4o 1 year ago
su 37
Peanutdinos3000 1 year ago
i get i could make 1 like it rc
rockonmyfriend 1 year ago
i see your hair
Leeanmarjon 1 year ago
for me this one is the one that flys better
sr1997 1 year ago
what is the paper airplane is in the left side of c-130 hercules? not the f-22 raptor.
Leeanmarjon 1 year ago
@Leeanmarjon the blue one is the yf 23 the black one is the su 47
taoistflyer 1 year ago
@taoistflyer not the big c-130 the small c-130
Leeanmarjon 1 year ago
I want to see you Fly it!
dustin4441 1 year ago
that is so sick probably the coolest thing ever
phily1222 1 year ago
your su 37 was awesome five stars
legonakonow 1 year ago
p51 please and the b2 does not have the tail thingy on the back
chingoblin24 1 year ago
all of the others i made didn't loop. is it supposed to loop? because mine flied like an aircraft, just needs strong winds.
onyokerz1 1 year ago
some of them loop better then others, the blue angle and the p38 are really good at looping, you need to bend the tail up just right to make it loop it takes a little practice but most of them can loop, this one can't loop though
taoistflyer 1 year ago
@taoistflyer my b2 can loop! i just bent the flaps and threw it hard and it loop two times.i am gona try two paper and put it together.the body and wing will be strong so that the b 2 can loop more than 2 times i thing.
ernshengjoel 1 year ago
can you please help me to do the eurofighter typhoon jet and the x36 for me ?
ernshengjoel 1 year ago
when are u going to release the p51 mustang
jrmx12345 1 year ago
i spy harrier! :D
Austin567 1 year ago
how do i copy it when it is on the screen
fallingbombs1 1 year ago
how do you know where to fold it?
crazydude52able 1 year ago
mw2 lol
freshgrim1999 2 years ago
haha i know right (;
MrSniperGecko 1 year ago
when i made this one it didnt work well but almost all the others do
grupa2009 2 years ago
this one is a little less stable, it is hard to make it loop, it's more of a glider, it took a while for me to design one that would even fly.
taoistflyer 2 years ago
WOW HOW MANY DO YOU HAVE????
heatblast425 2 years ago
I've made about 25 different aircraft.
taoistflyer 2 years ago
hey superdemon u SUCK
Fsxbestfriend 2 years ago
This comment has received too many negative votes show
that shit sucks
SuperDamon12 2 years ago
can u send these to me in a email cuz it wont let me dowload any of them D;
bakemycherrypie 2 years ago
Send me your email address in a PM
taoistflyer 2 years ago
instead of downloading it when it shows it on the screen go to full size veiw wait a couple seconds then press the button called Prt Scrn or something like it (its above the arrow keys) then go to paint edit paste downsize to whatever you want then print it works really well
grupa2009 2 years ago
get a fucking life kid ur lame as hell.
JoshJT4444 2 years ago
Same to you.
sorry your a dick and don't like the vids, but thousands of others have enjoyed them so it doesn't really bother me.
Have a nice day.
taoistflyer 2 years ago
it not that hard to do just a bit of common sense and glue is needed
staraptor2k9 2 years ago
wow,this model don't have a thing on his nose,awnsome,i just don't know how to fold it
freedomfighter81292 2 years ago
it got,wrong look
freedomfighter81292 2 years ago
When i adjust the elevators on the B-2 accurately, it goes back. just like it happened to my B-2
pedrosoandrew 2 years ago
Very nice!. Can you do the Avro Vulcan XH558?
brigad09 2 years ago
It's on my list, but it may be a while, I have a whole stack of videos to do before it.
You could probably put one together pretty easily using this technique.
taoistflyer 2 years ago
a answer of this is my b2 bomber version that is better in colour, i can do the avro vulcan, i can do it in different paintjobs, but i think that i will make the camo normal.
619cactusjack 2 years ago
brigad09, a answer of this video is the avro vulcan, i invite all to see my gallery of paper planes, i have 25+
619cactusjack 2 years ago
what kind of paper do you use? normal sheets of paper or a hard one?
gengrubiks 2 years ago
Could you make big ones like 6inches long!
D4rk43ver 2 years ago
6 or 7 inches is about as big as you can make them with normal paper, but with stiff paper or foam you can make them much much larger.
taoistflyer 2 years ago
its easy to create planes like that, the answer is my BWB concept aircraft of paper
619cactusjack 2 years ago
Your going too fast, i can't see what you do with the black edges.
rubypatate 2 years ago
The plane colour and skin looks like a pair of jeans
ExplosiveRage 2 years ago
I know, that's what I thought when I was dun making the first one. it's actually a real picture of a b2 that is cut up, so the colors are real, they just don't look black enough because of the lighting in the original picture.
taoistflyer 2 years ago
can you get going on the swing wing
ryanbp111 2 years ago
what is that plane when your building the b2 bomber, on the bottom left side, it has 2 green trips on each side, and a star on each wing....
tw1745 2 years ago
The one in the bottom left corner is a p 51 mustang, it's a little different then the rest, it is a little more 3d, and it is rubber band powered, but the rubber band power is more for show then flight.
It can do torque rolls.
taoistflyer 2 years ago
this is the only one i made they take so long to make lol but its cool and flys pretty good
MoRRisoNRisiN 2 years ago
You should make a blue angle or a p38 next, they both fly a hundred times better then this one.
taoistflyer 2 years ago
awsome i have ben waiting on this one
godfreek 2 years ago
tailors shears. scissors
ernestryles 2 years ago
thanks for do my favourite planes f22,f117,b2 and blackbird
619cactusjack 2 years ago
cool
dsaler1 2 years ago
I see m0re planes but they dont have a video will you make a video of them
m43991 2 years ago
nice 5/5
CapLAGOS 2 years ago