@joonjoon819 Those hands in the video are human hands that should give you some idea of the paper size, better still the 1ft ruler you can see in the video is a1ft long. As for Scale I have never weighed it but obviously the lighter the better . . .
Thanks so much for sharing this... been searching for the steps on how to make like this. Am gonna use it for my wedding.. Blessings to you... Please share more, and would appreciate if you will put audio on it.. :)
why is there no sound? i hate it when people make instructional videos and are too shy to talk in them. nobody cares what ur voice sounds like! have some confidence!
@TheWingedScapula Has stated in an earlier post this video was composed & posted as an exercise in visual only presentation for international understanding, all the information you need is in the video.
I felt that in would be arrogant to assume that further verbal explanation is necessary as this would only have been in my native tongue of English. The surprising popularity of this presentation especially from Non-English speaking countries bears witness to this being a wise choice . . .
Very good, thanks for the video. Yesterday was Chinese mid-autumn festival and if I found this earlier I would have made a flying lantern out of it. Oh well, there is always next year ;-)
Hey Gordon, I just built one of these balloons today, I'm headed to Hamburg tomorrow to surprise my girlfriend with it. She's gonna freak!!! Thanks. Any suggestions on candles used for the inside?
this thing is awesome! my friend made one and i made i bet with him that i could use my bb gun the shoot and tilt the flame canister while it was 40 feet in the air an set it on fire... i won.
@Jeloubool yes it is water , the glue does not need to be so strong because of the light weight material and the water evaporates away and makes the balloon lighter.
In the last month I have had three enquiries asking for written instructions on how to make this balloon. The following is how I replied to these requests : -
The instructions are in my head. I did make the video to be a rough self explanatory visual presentation with no commentary so that it could be understood internationally all you need is in the video if you look very closely.
The ruler in the video is 1ft long and the tissue paper is standard size if that helps. If you go through the video and write down step by step you should have some sort of instructions. Basically it is a loose cube with a 12" hole top and bottom, cover the top hole using a 14" square and glue a 12" square wire frame in the bottom.
You could start with something like :-
Take eight sheets of standard tissue paper fold in half, etc.
It was filled with hot air from an electric fan heater for the purposes of the video.
A single burner camping stove could be used to prime it for external launches or a fire-lighter attached to the centre of the wire frame if the environment is safe to do so.
@sickyanne Tishoo paper
TheLittlemix6400 3 weeks ago
@SickYanne he used standard "tissue paper" which can be obtained in stationers , craft or gift shops
raphaelandrada09 2 months ago
what about the size of the paper? or the scale?
joonjoon819 2 months ago
@joonjoon819 Those hands in the video are human hands that should give you some idea of the paper size, better still the 1ft ruler you can see in the video is a1ft long. As for Scale I have never weighed it but obviously the lighter the better . . .
GordonDipple 1 month ago
uhhhhh why did my lil bro watch this video, now its my problem :(, but nice easy steps :)
AdamChocoSo 2 months ago
@AdamChocoSo It's not a problem this will be a bonding exercise that will glue your very souls together . . .
GordonDipple 2 months ago
WHAT KIND OF PAPER DID YOU USE??
msjhasz29 2 months ago
@msjhasz29 AS STATED IN EARLIER POSTS It is standard "tissue paper", which can be obtained from stationers, craft or gift shops.
GordonDipple 2 months ago
Thanks so much for sharing this... been searching for the steps on how to make like this. Am gonna use it for my wedding.. Blessings to you... Please share more, and would appreciate if you will put audio on it.. :)
iampeeay01 3 months ago
can you please number the materials which did you use?
Ivver 4 months ago
Dude, can you please tell us the measurements? Its hard to make estimates...
DJDNDK 5 months ago
can you give us the measurements of the paper? please? I need it for our project...
DJDNDK 5 months ago
WHAT KIND OF PAPER IS THIS???
warlock0110 6 months ago
For an outdoor wedding, I would need to use fire-retardant spray on the paper before-hand, correct?
VioletPersuasion 6 months ago
Awesome idea! If u add a tea light candle will this fly? Or do u just blow air and send it outside?
MarJoTV 6 months ago
I Loved watching you make this. I think you did a wonderful job and showing us how to makeone ourselves. HaveA Nice Day & Thank You for sharing.
Jimilynn 9 months ago
why the hell is it that when i what to know how to make things smaller the only way is doing it big.
Rolando09090 9 months ago
what kind of paper is this?
TheEirica 1 year ago 3
Nice folding technique. I'm pretty confident I can make one now.
You can actually use cold boiled potato (just rub like a glue stick) to glue the lantern. Theoretically is would be even lighter if used properly.
PuppyZwolle 1 year ago
why is there no sound? i hate it when people make instructional videos and are too shy to talk in them. nobody cares what ur voice sounds like! have some confidence!
TheWingedScapula 1 year ago 18
@TheWingedScapula Has stated in an earlier post this video was composed & posted as an exercise in visual only presentation for international understanding, all the information you need is in the video.
I felt that in would be arrogant to assume that further verbal explanation is necessary as this would only have been in my native tongue of English. The surprising popularity of this presentation especially from Non-English speaking countries bears witness to this being a wise choice . . .
GordonDipple 1 year ago 43
@GordonDipple music would have been a nice touch. good video.
slmUSA 8 months ago
HEy MAN, NiCE BaLLoOn., IS ThiS reSIsTanT to WInD?
traiano 1 year ago
wouldnt this be dangerous if a plane hit it or if the tops went on fire and it fell into a house?
GamerIreland 1 year ago
Well done, Fantastic idea
ei1429 1 year ago
What comes next???
aardvark1956 1 year ago
Very good, thanks for the video. Yesterday was Chinese mid-autumn festival and if I found this earlier I would have made a flying lantern out of it. Oh well, there is always next year ;-)
198back 1 year ago
Hey Gordon, I just built one of these balloons today, I'm headed to Hamburg tomorrow to surprise my girlfriend with it. She's gonna freak!!! Thanks. Any suggestions on candles used for the inside?
mckinnonjames 1 year ago
@mckinnonjames how was your girlfriend encounter with the balloon? i wouldlike to do the same..
traiano 1 year ago
gordon, you dont need add the top after . the top is a part of gome.
and the whater is not necessarie . glue can add directly with botle. a simple line of glue resolv. thanks for this video..
regards
a brazilian baloner
terainfo 1 year ago
what is the wire used for? can we use something other than the wire? like tape?
oobiemoobies 1 year ago
@oobiemoobies The wire is to attach a fire lighter, or other heat, source for longer outdoor flights.
GordonDipple 1 year ago
this thing is awesome! my friend made one and i made i bet with him that i could use my bb gun the shoot and tilt the flame canister while it was 40 feet in the air an set it on fire... i won.
varun009 1 year ago
Is that water that you are mixing with glue?
Jeloubool 1 year ago
@Jeloubool yes it is water , the glue does not need to be so strong because of the light weight material and the water evaporates away and makes the balloon lighter.
GordonDipple 1 year ago
@GordonDipple which would be lighter, stick glue or your concoction of glue and water?
ls2much 1 year ago
whats the materials?
PaineHeaven 2 years ago
Hi. Is it possible to make a mini hot air balloon with any type of fabric?
gojin 2 years ago
no it will be too heavy
qo1o4262UYA 2 years ago
that is cool
MGS2SolidSnake 2 years ago 4
thanks man i have to make 1 4 skool and it really helped
rozaespinozza 2 years ago 4
i tried doing it and it really worked! i had so much fun!
berritouches 2 years ago 7
me parece un excelente video y boy a tratar dde imitarlos haciendo mis globos muchas GRACIAS DESDE MÉXICO
corvelciencias 2 years ago 3
how come the paper doesnt catch fire from the heat??
Ishaq91 2 years ago 2
a good qeustion, i reckon the air must not heat up enough to set alight to the paper.
poloptree 2 years ago
lol i thought my laptop sound card stoped responding!
hasanjohnh 2 years ago
i tried to make one outa normal paper and it worked but then it burnt a hole in the top and fell back down
england4589 2 years ago
i have a question do you put a candle in it or something
Optimus1177 2 years ago
I filled it with heat from the space heater. You just keep refilling it when the hot air cools. You could probably use a blowdrier on low, too.
rhiakolareny 2 years ago
Buen video, gracias.
marckmon 2 years ago
Thanks ^^
I sorta made one, and looks pretty nice [except there's too many holes -.-]
I had to make one for school, and it helped~
iRadiant 2 years ago
Thank your for you comment. I am sure it is fine, you can always patch up the holes with bits of tissue, at least you tried! Well done.
GordonDipple 2 years ago
wat kind of paper is that? thanks...
vahnrondel 3 years ago
In the last month I have had three enquiries asking for written instructions on how to make this balloon. The following is how I replied to these requests : -
GordonDipple 3 years ago
The instructions are in my head. I did make the video to be a rough self explanatory visual presentation with no commentary so that it could be understood internationally all you need is in the video if you look very closely.
GordonDipple 3 years ago
The ruler in the video is 1ft long and the tissue paper is standard size if that helps. If you go through the video and write down step by step you should have some sort of instructions. Basically it is a loose cube with a 12" hole top and bottom, cover the top hole using a 14" square and glue a 12" square wire frame in the bottom.
You could start with something like :-
Take eight sheets of standard tissue paper fold in half, etc.
GordonDipple 3 years ago
How did you blow it up??
CarCrasher17 3 years ago
It was filled with hot air from an electric fan heater for the purposes of the video.
A single burner camping stove could be used to prime it for external launches or a fire-lighter attached to the centre of the wire frame if the environment is safe to do so.
GordonDipple 3 years ago
how good is that!
thanks Gordon
melfalah 3 years ago
do you think you could light a fire under it to make it fly?
like attaching the base to a cotton/acetone mix and lighting that up?
anElaborateMess 3 years ago
sem som?
guilhermeinde 3 years ago
Pesaroso sobre nenhum som. Eu tentei fazer-lhe toda a apresentação visual para a compreensão internacional.
GordonDipple 3 years ago
no sound?
biggbro1 3 years ago
Sorry about no sound. I tried to make it an all visual presentation for international understanding.
GordonDipple 3 years ago
this is such good material
frangapani13 3 years ago
It is standard "tissue paper", which can be obtained from stationers, craft or gift shops.
GordonDipple 3 years ago
hey...my paper burned....ZZZ
smcnike 4 years ago
cool!! : D
simentri 4 years ago
that is an awsome way to make a hot air ballon
shadowmark68 4 years ago
THANK YOU [2]
rafask8drop 4 years ago 4
THANK YOU
741741 4 years ago 4