Nokia N95 Fascia / Face Plate Change

[asvid437]

i can hear u saying... turn it on , 4:55 to 4:58.

[hasham360]

thx mate

[meyarz]

Thank you very helpfull. Some twat on a "how too" page, had left the part about sliding the slider down and removing those skews too, i nearly broke my phone!!

[ishan350z]

where did you get the case..???

mine oringnal case is trashed,and i want a new one,

can u tell me wher to buy..?

[JackInTheFrost]

What about the rubber seal, and who is that homo I can hear whispering in the backgound?

[1lubo1]

@JackInTheFrost "who is that homo I can hear whispering in the backgound?"

lol! made my evening!

[satyvirjasra]

0:41... no match found....he said okay!

[fulhammad]

my screws have gone rounded anyway of getting them out pls

[BLEEBLY]

someone make one for the 8gb version!! please!!

[hypethis67up]

can someone answer please.

if i change the housing to black from he original silver and purple that the n95 8gb comes with... will it looks exactly the same as a store bought black n95 or not????

be quick, thanks

[54651951981919198]

Sorry bro it cant look like that. Any one can Regognise it easily.Because N95 8Gb has a nice and shinny Cassing and Bigg screen then the Simple one And Some of the buttons of N95 are change from N95 8GB.

[hypethis67up]

yeh doesnt matter

i got a nokia 6700 instead :P

[54651951981919198]

Good FOr you Bro!

[alexlex85]

you will not be able to fit your external memory card as the 8gb version hasnt got a slot

[hossamm3]

looks ugly :S

[Kamal502]

is it same way for 8gb models

[BioCompStudioMusic]

thnx :)

[iturberules88]

The screwdriver I received with my cover made the screws rounded so now I can't take them out GRRRRRRRRRRRRR

[sirkidkelly]

hi have you managed to get your screws out of your n95 now ?? if so how did you do it?  got the same problem. thanks nick

[iturberules88]

nah, i can never change them now. :(

[Sacapuntus]

Ano how to, what you do is make a slotted hole in it (Small) Then use that and replace them

[Hyper7er]

id reccomend getting a flat head cheep screwdriver and file and grinding the flat head smaller little by little until it can fit the screw

[Jadsia]

It didn't work with a T5 for me. It was too small.

I think it has to be a T6.

[Valnjes]

I do all srews with T6, never had a problem...

(i never worked with N95, but all other nokia models, sone-e and motorola uses T6 Torx only)

[MarkyBNo4]

Ive just ordered a new case for mine cos the top keypad isnt working (the one with the arrow keys) please tell me that most new front fascias come with a new keypad cos in this video it looks like the old ones gone back on the fone

[iturberules88]

Mine came with a new keypad

[seanhogan1990]

wher u get t5 screwdriver from???????

[drancill]

Our website :)

[Wrothdonkey]

where did you get the case Mine is trashed and I cant find any help

[blahblaz]

jus search for n95 housing on the internet and you should get a few hits come up

its easy to find

[seanhogan1990]

it sez at the very end u fuckkkkin pillok

[drancill]

If you're still after them, we are yet to put them on our website but if you message me if you're still after a fascia and I'll send you over some colours etc.

[Phoneknower]

you have to pick a colour that maches

[haseeb925]

which version on the n95 do you have

cuz the t-5 doesn't work on my nokia v-1

[anaifr]

except you didn't explain how to change the back half, shame!

[nelv3]

lol its really easy to change the back

1. you take your finger and put it on the sides of the slider

2 if you have long nails just slowly put your finger inbetween the gap of the slider bit (if you can find the lil gap)

and then just run your finger all the way to the back your done =] then it should clip right off...well thats what happened with my n95 8gb xD

[red123adamb]

wow thanks

[anaifr]

just what i needed, you're my hero!!!

[zagab1234]

turn off mibile????

[zagab1234]

"mobile"

[Eddiesz]

what torx you get

[seliviano]

very cool phone wow

[Benist1987]

Is recommended properly to turn the phone off.

..."No match found!"

Okay.

lol

[Trendz4U]

thanks a lot of the video...

[Tezdread]

you should get the screw drivers when you buy the new case

[raghu469]

Hey that was helpful. What kind of screw driver is that. can you specify the number..

Thanks

[jamesdanielwebber]

where can you get these screw drivers from?

[wachin123]

wachin apaga q te va a entrar en corto la vas a cagar asi negra te puede aser falso contacto el lcd c t formatea la tranflash y perdes todo

[tuveuxtuveuxpas]

lo vas ha petar primo  quitale la bateria

[doug12341988]

some good tips! thanks

[Boby0802]

can some won give me this telefone please please please ;(

[dochertyx3]

i cant get a screwdriver to fit the screws! :(

helpppp.

[erol56]

at the end the guy whispers

"Turn it on"

HAH LOL

[nobyo]

hell yeah :D

[baolinh111]

i did a complete face lift, everything working perfect except 1 thing, the phone wont recognize when it being slides, anyone know how to fix it?

the magnetic slider mechanic still works fine, i dont know why the phone wont detect it

[kingofkingsnz]

can you please please please please please make a video of changing the back cause thats the part of the phone that i hate the back not the front please please please make a video about how to change the back.

[earns22]

brilliant, I wanted to know how to change my speaker before I bought a replacement, thanks again

[jimbobman20]

Please could you tell me what tools, you need to change the front fascia,do they have a specific name?

Thanks

[scaranoa]

Torx number five

[Mitch200714]

could u here the wispering???? ^_^

gd vid hanx

[cashier07]

very helpful thanx. bt me if i'll change cover shift only to the gold plated one!

[bandora]

Where did you get that battery cover with the "Nokia Nseries" label on it!?

[jared123412]

I'm having trouble cos one of the screws is stuffed . Any ideas on how to unscrew it?

[keepingthefaith72]

Pity you didnt get someone who could use a video camera ...

[drancill]

Jamie is learning :D

[bdh84]

where do you get new covers

[robnek085]

hi, i really want to know if there is any web page with instruccions to change all the cover. Thx

[662049983]

what the hell about his english??? where do he is from???

[hamadaironman]

cool thanks

[tommylux247]

I stripped one of the screws. But with all other 3 off, I can break of the last screw as I have the back plate and replacement screws. Might try drilling first, to prevent breaking something inside and to get a clean removal.

Any thoughts?

It would have been nice to keep the original parts, in case it needed to go back

[bangelta]

What about the back ??????? what about the back for the love of god NOOOOOOOOOOOOOOOOOOOOOOOOOOOOO­OOOOOOOOOO

[shreif]

thanks alot for this video :D i wanted to do it but i was afraid of what am i gonna find under cover! thanks again