HUGHES 500D BLADE 400 HELI ARTIST FUSELAGE

[SuperWildman69]

Nice photos...let's see her flying

[1BLADESHY]

Sorry to say it ,but she's no longer with me. She met her doom as a result of dumb thumbs,but there is video of the first test hover on my channel. Thanks for the comment :-)

[Joeriver92]

need to know if you left the tail boom suport,i put my and left suports off and i lost all,bad viabration,,joeriver92

[1BLADESHY]

hey,i removed the supports, you have to to install the fuse. the heli in the vid i had no problems with. the second one i built has a trex 450 in it and it has the same issues as yours it shook so bad it broke the mounts loose from the frame and bent the main shaft. don't know why, still trying to figure it out. if you solve the problem first let me know. i'm going to check on helifreak,there is alot of good info there. good luck :-)

[carlosperla]

I have the same heli and fuselage but i have a little problem,

the Gyro don't fix inside of the fuselage, where did you put the gyro, i'know it must to stay in vertical position with de led light in direccion to the tail boom. Thank you!!

[1BLADESHY]

i am using a gy240 gyro and it fits fine. when i had the eflight gyro i just turned it 90 degrees so the wires run parallel with the tail boom

[carlosperla]

Oh thank you, any setup for the gyro after turned 90 degrees ?

Thanks for your quick response

[1BLADESHY]

just make sure the direction your servo moves stayed the same. sometimes turning the gyro will reverse the servo direction :-)

[carlosperla]

Thank you now you resolve my problem, keep flying :D

[dolbydarma]

How much work/problem solving did this project take? I am not a builder but interested in making my blade 400 look just like this. How did it fly compared to pre-scale looks? Thanks for any info.

[popcornreviews]

looks nice!

but i dont get the paint job!