jakby taki zestaw miał szlak trafić bo 5 hamowaniach to by ich nie dopuścili do sprzedaży... nie takie rzeczy by wytrzymały... to nie corsa 1.0 tylko infiniti.
are you rotors drilled and slotted? cause those ones dont looks like they are slotted or drilled. also you must be riding the braked pretty hard, are you sure they are disengaging all the way when brake is fully let off? when you put after marked shit on you always have to recheck specs or recalibrate shit.
So maybe some weight reduction should be taken under consideration. Substantial weight reduction, those infiniti's are chubby as fuck, or you could just buy a lighter car for driving like a lunatic and drive this one like a normal person.
@jokervrs Clearly you can't put grease on brakes unless you're an idiot and don't feel like being able to stop when pressure is applied. It was a joke but people don't understand smart humor.
The most I've ever had was smoke from the brakes, but this was totally normal because I had just done a pad and rotor change and I was testing/seating them by doing some heavy braking from speed.
You my friend have something a bit more substantial!
@RunTX Are you sure? Thats very poor quality for hawk pads to start fire when only braking from 120 km/h to 0 five times. I can do that in my mom's car with shitty autozone pads and still be okay..
@RunTX man, that brake set up is scary. Just 5 times braking from 120-0km?
When I bed in my GT-R's pads I did 200-30km for 8-10 times, it got hot and I could feel the fade but there wasn't any glow or smoke, just really bad smells.
Brake Calipper issue where when you release the brakes they don't spread apart fully leaving you pads slightly touching the rotors. You wont feel any braking but you brakes heat up.
After overheating at least once your pads are burnt so they wont function properly after this also
@MrRally4ever , ABS sensors (you can see only one side ..... but i can make you sure, that right wheel burning the same :)) still work properly. 600+ degrees can't make them harm.
And now all new brake 6pistons system works correctly. Can make intensive braking till ABS starts functioning....... and most important .... even temperature risin' too high - my brake pedal continue workin' )))
I've just finished all tests of my new DBA 4000 slotted and HAWK HPS brake pads...... They smoked too much )))) (of course all preprocedures for 500 km have been done)
At the end of that exam )) I stopped on the street to have a rest. And have seen what you see....... take my phone .... make some pictures ..... jumped in and went to cool my brakes ......
@petrol4d - yuo're right, man. As you can see - i made a 5 sec clip - and than jumped in my car and start cooling my brakes. Manufaster of discs - DBA 4000 series, non slotted.
As result - no problem with discs - but some damage with brake rotors. Repair kit has been needed.
@jcadlols Yes indeed you can. I just avoid burning disc's all together. I find using the brake peddle correctly and slowing through the greabox you can avoid this problem. some bigger disc or vented disc set up helps too. Never put your hand brake on (parking brake, USA) after coming of track this can weld rear pads as well.
@petrol4d The car I drive at the track (my dad's) has rx7 brakes whilst weighing 500kg, so I must admit I haven't tried using engine breaking at the track. Hahaha :)
You know when they really glow is after a tire blowing burnout.
runiggarunrunrun 1 day ago
next time try to put the fire out with something other than a video camera
daveygravey123456 3 days ago 3
What happend ?
sa3ood16 4 days ago
Boil the brake fluid yet?
niceday2dayman 5 days ago
jakby taki zestaw miał szlak trafić bo 5 hamowaniach to by ich nie dopuścili do sprzedaży... nie takie rzeczy by wytrzymały... to nie corsa 1.0 tylko infiniti.
blonie3 6 days ago
Don't worry, just the neighbor trying to get to work...
MMPSOnyou777 6 days ago
Me on the way to work....
richfilmswales 1 week ago
are you rotors drilled and slotted? cause those ones dont looks like they are slotted or drilled. also you must be riding the braked pretty hard, are you sure they are disengaging all the way when brake is fully let off? when you put after marked shit on you always have to recheck specs or recalibrate shit.
dudewtf1776 1 week ago
I have the 4 piston akebonos and they glow after hard driving as well. I have stoptech pads with motul fluid. But my ABS seems fine!
gevosti 1 week ago
So maybe some weight reduction should be taken under consideration. Substantial weight reduction, those infiniti's are chubby as fuck, or you could just buy a lighter car for driving like a lunatic and drive this one like a normal person.
HyperShotty870 2 weeks ago
Comment removed
LAwrx03 4 days ago
Did you try to stop the planet with that brakes ? ? ? :P
Diamas1985 2 weeks ago
nice fake!
nala243 2 weeks ago
lol instead of putting it out you take out your phone and record it, we thank you.
Hondas337 2 weeks ago
Methinks cool down lap is needed
peanuts2105 2 weeks ago
BURN BABY BURN! Don't take it personaly just made me think of that really annoying song watching this video! hope you got your brakes all sorted!
MTBwayneMTB 3 weeks ago
Hot Wheels
Ryannn93 3 weeks ago
keeewwwwwllllll
JulianoRamirez 3 weeks ago
Well,
There's your problem.
lmaomarine 3 weeks ago
You should put some grease on the brake pad to relieve some friction.
Zh1tube 3 weeks ago
@Zh1tube The physics of a brake system require maximum friction for maximum stopping power. to an extent of course untill the wheels lock up
jokervrs 2 weeks ago
@jokervrs Clearly you can't put grease on brakes unless you're an idiot and don't feel like being able to stop when pressure is applied. It was a joke but people don't understand smart humor.
Zh1tube 2 weeks ago
@Zh1tube Smart humor.... Like soo smart that its stupid.
jokervrs 2 weeks ago
haaaaaaaaaaaaaaaaaaaaaa o dare u to touch it
4ndrew901 4 weeks ago
Stuck in the wilderness, cold, and all I have is my Acura. Needing fire source. ...BRAKES.
SuperToasterCat 1 month ago
That's what happens when OEM rotors meets cheap non ceramic carbon brake pads... Less performance and get toast in high speed chase
spencer82rocks 1 month ago
Szkoda felg...
matrixx991 1 month ago
The most I've ever had was smoke from the brakes, but this was totally normal because I had just done a pad and rotor change and I was testing/seating them by doing some heavy braking from speed.
You my friend have something a bit more substantial!
Ferrariman601 1 month ago
Time for some Brembo's
rompn4x 1 month ago
This reminds me of when Jeremy Clarkson reviewed the SLR mclaren XD
mystiqueman366 1 month ago
Rear brakes should never burn.Check with a mechanic for the brake ratio.
trio3d 1 month ago
Typical nissan
AtariFTW 1 month ago
@AtariFTW What does that have to do with Nissan? The brakes and rotors were not designed by Nissan you dummy : P
H1mynameisLarry 1 month ago
laugh
ronaldinho12335 2 months ago
How the hell does one manage this? Lol
TheVengefulCo 2 months ago
Infinity and Nissan have the worse brakes on the market
sayeedrehan 2 months ago
1 - Brakes catch fire
2 - Take time to get camera
3 - Watch your own car burn
nielsboex 2 months ago
Just to let you know, its the brake dust, not the brakes that burn
mollis123456 2 months ago
Hmm... My brakes are on fire.. Better film it and put it on YouTube instead of throwing water on them
RamaLamaDingDon 3 months ago
@RamaLamaDingDon would you realy be that stupid? water? realy..
Timmys2007 1 month ago
@Timmys2007 Do you know what trolling means? No?
RamaLamaDingDon 1 month ago
Poor vehicle. What a beautiful machine.
speakdino10 3 months ago
were is the second 6 ???
sGTI94 3 months ago
yay for not having disk brakes on my car...i guess....
bad65stang 3 months ago
fuck dude the rim got burned
barterspark 3 months ago
Idiot!
flippi12 3 months ago
You have one of the speacial braking type foot :))
ultimatelane 4 months ago
shouldve drive off to let it cool not stop and admire the fire.
sunnyjason 4 months ago
OMG MY BRAKES ARE ON FIRE QUICK GET THE CAMERA
Mrboomx 4 months ago
Brakes on fire, brakes on fire, burning burng in desire... :D
michael9515 5 months ago
who was the genius that decided, "lets make a video of my infiniti on fire while i could be putting the fire out instead."
StrongIslandNewYork 6 months ago
Did you send this to HPS?
AeroPR 6 months ago
how do you like your warped rotors?
DaBrute 6 months ago
NEVER BUY A HONDA JAZZ. The brakes catch fire. Trust me.
liamcollister 6 months ago
The Brake said: So you just stand there and see me burn.... but that's all right because I love the way it hurt........
mixmanling 6 months ago 2
ah man, how heavy were you braking dude, you're rotors are glowing lol. what kind of setup do you have?
hwhhww 7 months ago 24
@hwhhww , i have made 5 times braking from 120-0 km/h.
My config at picture is - DBA4000 discs + Hawk HPS pads - on front and rear
RunTX 7 months ago 16
@RunTX Are you sure? Thats very poor quality for hawk pads to start fire when only braking from 120 km/h to 0 five times. I can do that in my mom's car with shitty autozone pads and still be okay..
hwhhww 7 months ago
@RunTX man, that brake set up is scary. Just 5 times braking from 120-0km?
When I bed in my GT-R's pads I did 200-30km for 8-10 times, it got hot and I could feel the fade but there wasn't any glow or smoke, just really bad smells.
golferchin76 6 months ago
Comment removed
CMDai1 5 months ago
@RunTX
1 of 2 things
Bad Brake Pads
Or
Brake Calipper issue where when you release the brakes they don't spread apart fully leaving you pads slightly touching the rotors. You wont feel any braking but you brakes heat up.
After overheating at least once your pads are burnt so they wont function properly after this also
CMDai1 5 months ago
@RunTX Why were you braking so much ? 120-0 5 times is excessive.. lol
midgetmayo 4 months ago
@RunTX Why the fuck
BlazerandBaller 5 days ago
quick throw some ice water on it
B0YTOYS 7 months ago
as i have written below - after this fire - hole brake system was checked.
Repair kit for brake pistons have been needed. All other components did not get any harm.
Now - 6p AP racing brake system was installed on front.
But its still burning )))))))
RunTX 9 months ago
@RunTX It didn't damage the ABS sensor?, or were they already gone. Currently I drive a car without ABS and have the brakes glow quite regularly.
MrRally4ever 8 months ago
@MrRally4ever , ABS sensors (you can see only one side ..... but i can make you sure, that right wheel burning the same :)) still work properly. 600+ degrees can't make them harm.
And now all new brake 6pistons system works correctly. Can make intensive braking till ABS starts functioning....... and most important .... even temperature risin' too high - my brake pedal continue workin' )))
RunTX 8 months ago
@MrRally4ever were your brakes destroyed?
scrokostas 4 months ago
@RunTX if i were u id put water on those brakes so they dont put the car on fire
topal002 4 months ago
небось
harounq1 9 months ago
with fire like that, be careful and check your brake lines and see if any of them have holes?
sillychink3293 9 months ago
)))))) its so suddenly happened ))))
I've just finished all tests of my new DBA 4000 slotted and HAWK HPS brake pads...... They smoked too much )))) (of course all preprocedures for 500 km have been done)
At the end of that exam )) I stopped on the street to have a rest. And have seen what you see....... take my phone .... make some pictures ..... jumped in and went to cool my brakes ......
RunTX 10 months ago 2
@RunTX Are you russian?:p
k0edby22 2 weeks ago
Yeah our car is about to blow up
GET THE CAMERA!!!!
bmxracer91 10 months ago 5
haha great to video it but how abouts putting the flame out
anotherhoe 1 year ago
sitting still watching them burn is no good. you need to keep moving and let them cool, other wise you will warp the discs.
petrol4d 1 year ago 54
@petrol4d - yuo're right, man. As you can see - i made a 5 sec clip - and than jumped in my car and start cooling my brakes. Manufaster of discs - DBA 4000 series, non slotted.
As result - no problem with discs - but some damage with brake rotors. Repair kit has been needed.
RunTX 1 year ago
@petrol4d you can get pad welding too (on the rears especially)
jcadlols 4 months ago
@jcadlols Yes indeed you can. I just avoid burning disc's all together. I find using the brake peddle correctly and slowing through the greabox you can avoid this problem. some bigger disc or vented disc set up helps too. Never put your hand brake on (parking brake, USA) after coming of track this can weld rear pads as well.
petrol4d 4 months ago
@petrol4d The car I drive at the track (my dad's) has rx7 brakes whilst weighing 500kg, so I must admit I haven't tried using engine breaking at the track. Hahaha :)
jcadlols 4 months ago
This has been flagged as spam show
прикольно. плюс 5
вот если бы показал как вся машина сгорела поставил бы плюс 105
fibrin100 1 year ago
This has been flagged as spam show
прикольно. +5
вот если бы показал как вся машина сгорела поставил бы +105
fibrin100 1 year ago
прикольно. +5
вот если бы показал как вся машина сгорела поставил бы +105
fibrin100 1 year ago
Сальники небось выгорели на суппортах, обкладки трубок тормозных - если резинки рядом. Жаль.
ilya2184 1 year ago
@ilya2184 ремкомплект потребовался.
Манжеты суппортов не сгорели - но задубели и потрескались. До трубок пламя не добралось.
RunTX 1 year ago
@RunTX Зачет Инфинити если при таком перегреве и возгорании герметичность не потерялась.
ilya2184 1 year ago
Omg
KHARYBINE 1 year ago
молодец!!! машина то хоть не загорелась??
Gizmo69s 1 year ago
да лан ) успел так сбить - в движении
RunTX 1 year ago
ебать, беги за огнетушителем
1AAlexandr 1 year ago 26
Тормоза на G35x это просто нечто. Я свои разогревал до появления синего огня ночью :)
Sylo999 1 year ago