i did eveything you said and i can get boot from bt3. But when try to open konsole, the size thingy doesnt go away and i cant type anything. What should i do?
hey i can't get it to worki go into the bios after doing all that and set the boot priority to hte flash drive first and it just ignores it and goes straight to vista?!?!
WHen i start up backtrack, it says "triggering ubdev" i think it was. Then the computer freezes. It is like this for all modes. Even when i take the usb out the picture is still there...
estoi casado de buscar y buscar Alguien que sepa .bueno tengo todoa esto en nel usb pero no ocure nada solo me dise que está instalado pero siguen solo las dos carpetas en el pendrive
but i'm having some problems, after reboot and run from usb device, there is many opciin, but unfortunaly none of them works... when I choose any, just appear a black screen and nothing else...
i had the same problem when i first started backtrack a couple years ago... it sucks, and theres alot to explain.. first try goin on the remote exploit forums (theyre the developers) but to give a little advice, when at the boot up have the option highlighter where you can start in graphics mode (kde) hit tab, then hit space, and type acpi=off noapic and then hit enter, and boot up.. see if that helps at all
How do you shutdown the computer when running from the usb as when i goto shut the computer down it just says end current session and then takes me to the backtrack login screen.
after download was done i got a rar file i extract it and i got the boot and BT3 folders
after that i Open the bootnist.bat and it says that E: should now be bootable after restarting and changing that boot modes to removable disk first i still cant boot it can u help?
any error messages? or... is it just not even reading the usb at all? try putting that bad boy in another usb port, restart and re-check the boot order. if vista make sure you do everything as administrator
okay now i was able to get into BT# but once in i went to internet then check connections or somethign liek that and it told me a message that said that there werent any connections found and that the connection browser was going to close.. is my card not compatible can u tell me?? i got a:
Intel(R) WiFi Link 5100 AGN and a
Realtek RTL8168C(P)/8111C(P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
im not too sure about that wireless, but have you tried hooking up a wired connection?
I cannot find your card on the supported hardware list for Back Track on the Back Track wiki. If you dig around the remote-exploit forums I'm sure you'll get the info on your wireless card.
But, for now my advice is try to get a wired connection, and if that works out for you surf the net to find the dirt on your wireless, if it ends up not being compatible google "hcl wireless" and find one that will work
I did all you said. I went to BIOS before all of this and set my boot priority to 1.removable drive 2. cd/dvd and 3. hard disc. And after I reset my computer it still doesnt boot from USB. Help me out here, please!
Lol, how noobish of me! I got it :) Just done a little bit of poking around in BIOS and saw where I made a mistake :D :D I guess i asked for help to early :) Great videos btw. Very useful!
ahhh thats easy :) thanks man. i just did it by slapping those 2 files without formatting or installing .bat into it. what kind of tech am i ;) thanks again .
ive installed bte on my usb drive, i try to bbot from it and it comes up with a blackscreen and says syslinux load error : boot error what could this bee!!!!! please help me someone
if you have dual core processor, disable the ACPI option from BIOS (Power tab) if it doesn't boot from USB (if the image remains black and nothing else shows up)
p.s.: how do I set backtrack 3 final (from usb) on persistent mode? on reboot i loose every config i am making
You over complicated this. To make it more simple, grab a copy of 7zip or WinRAR and drag+drop the files into a freshly formatted stick or SD card, and double click the .bat
could be a video issue. check out the remote-exploit forums.. i handled alot of problems with video issues over there... or you could just PM me and ill help you personally.
i have the same problem...ps i`m instaling it on a memory card...after i restart my laptop i chose boot from memory card and all what appears is _...i don`t now how to send private message...
i got the same problem.. a black screen, no boot. so, I changed the memory card with a brand usb stick and now it's working.. i think some usb sticks are not recognized by eeePC BIOS..
Im having problems with the installation. An error message keeps popping up after i type in "bootinst.bat". It says "Exception Processing Message c0000013 Parameters 75b6bf7c 4 75b6bf7c 75b6bf7c". I have downloaded the usb version from the site, and extracted the correct files from the iso. I have done all of the instructions that you said above. Please help!!!
heh thanks for the video, I'm just roaming YouTube harvest videos for offline mode if Internet2 ever arrives.
I notice you also play Diablo 2 LOD, Thats an excellent game :) I had a few accounts there for many years. Its a real annoying installation process [Diablo2] lol.
same with me, i just recently got bored with D2 though, lol. i've played it for years as well... just waiting for D3 to make an appearance, but until then i havent been gaming online really
great video, i currently got my bt3 to work i'm just doing some checking and getting dictionary ready for WPA and stuff..BTW some people may be difference letter for their USB. mine was F: and others may be K: like yours or E:. thanks for the vid, well explained...5*
But during the process I'm recieving a error-message. It comes up when the process is making the usb bootable. Although the error (error about syslinux) the process message indicates that the usb is succesfully bootable.
If I tried it out. It wont boot!!!
I downloaded the iso-file directly from remote-exploited!!
WTF I downloaded the usb version, dropped it into the stick after formatting it first, and all I see is the same one file, not the 2 you show, How are you getting 2 files to drop in there, don't tell me it splits like an cell.
All 3 downloads are ISO,s where or how are you getting these 2 files, I tried extracting it into a folder and I get a shit of files, wish I knew which of them to pack into these two folders, Tired of booting BT3 from CD and want to USB bootit!
i have a major issue, not with ur instruction but with me bios settings
i followed your instructions bit by bit with succes but when it came to trying to boot the usb flash drive i couldnt find it on the list of bootable items, i tried diffrent usb ports and even tried plugging it into a usb hub
please help!
P.S: im running windows vista home premium on a acer aspire 5710g notebook, 4gb ram, two 69 gb hdds and an intel centrino duo processor
im a bit drunk off my ass right now, its been a couple days since your question.. any luck with solving your problem? wierd u cant bott it first from your bios, it is plugged in while u try to boot it via bios? if not bios is there some sort of "f" key for boot options rather than just going through boot order from bios? arrrrrr get back to me whilst i take another shot
Thx for the reply phait, I have BT3 on cd and it runs smooth( it boots up and I get to see what i'll be working with). Meaning I get to do everything on it but actually use it. I am still in the middle of getting a compatible adapter. However I've tried to make a USB bootable and no mater what tutorial I follow it just doesn't work. Could it be my Laptop? Though I don't think so. I get a Kernel error.
As far as adapters go I recommend getting the Hawking HWUG1.
Hawking HWUG1
* Driver: rt73
* Chipset: ralink
* Injection and monitor mode work fine, just have to "ifconfig rausb0 up" and it works
I have it with the High Gain Antenna you can buy for it, as well. As far as that adapter goes though, I bought it (and still use it) and it works right out of the box.
As far as your USB problem, no, I don't believe from what you've told me it's a laptop issue.
all depends on ones computer knowledge and the right timing. obviously if you crack your neighbors WEP key they probably wont notice (unless they are computer savvy which chances are they are not having WEP encryption (lol). but lets say you change your MAC and they are computer savvy and are in the right place at the right time, noticing an outside connection on their system(s)/machine(s) they could trace the wireless signals and where they are coming from if givin the right amount of time.
hey im new to thise computer stuff and i have a dell laptop with vista home premium and i really need to download back track so i can get a better internet conection.and whats a usb???
why is ti that every one that is cool and likes to do cool stuff like computers and knows stuff also plays d2 lod hehe i think that i found a connection here D2 LoD = Smartness yep :p Nice Vid by the way
You never mentioned what type of file system you formated it too. I would like to know, thanks. I'm going to assume not NTFS since that is proprietary to microsoft.
omg someone needs to help me.i did everything right i went into cmd did all that i went to the bootinst ran that and when i try to boot its just a black screen witht he blinking line its annoying
hey Fisher, Backtrack does run on windows if you use VMWARE. It will run in a virtual machine environment. Personally, id follow this tutorial and run it off a flash drive, once you get a little experience playing around with it while on a flash drive, go to the BT3 website and down load the VMWARE version.
after I did all your steps
fedotiulian 1 month ago
it says at the end unsupported media
fedotiulian 1 month ago
hey uploader nothing new changed after the installation I can still not run back track 3
fedotiulian 1 month ago
What is the song?
austiion 1 month ago
can you tell me how to boot my computer from the usb after i install it in the usb?
Theethruth 8 months ago
very nice
Junaid3233 9 months ago
This is not installing backtrack into usb..Rename video to "Making Backtrack bootable into usb"
mtsacricky09 10 months ago
if i do this to a usb that already have stuff on there will i lose it or will i be able to access the data on there later?
MrCelloman21 1 year ago
just made a twitter! twitter (dot) com/robroy_linuxguy follow me! ill ask questions and continue BT support
phait08 1 year ago
nice vid, ty
KennYA51 1 year ago
is there anyway you can install Backtrack 3 simply by mounting the .iso file using daemon tools? and making the commands under the specific drive?
Shooter412 1 year ago
what song is that?
and thanks :D got it working thanks to you :)
BradleyC654 1 year ago
Please Please Answer
if i install backtrack to my USB will it format(delete) only my usb
or the whole Hard Disk?
ivandonat 1 year ago
people lrn to google..... google backtrack 3 usb download..... click a few links bam there it is
ustink142 1 year ago
where can i get the usb backtrack 3?
IwishIwereJoe 1 year ago
thank you for making sense ... every other vids I saw they just blah blah to much... Dling BT3 now...
ushero87 1 year ago
wow works like charm
thank you then
specially the change password for root
it really helps me alot
thank's so much
keep it up mate
thesprakanyt 1 year ago
whoever said anything about paying for it?
phait08 2 years ago
this is fuckin gay.. there is a point why people watch videos on youtube.. so they wont have to read the fuckin long shitt..
DIego12Moctezuma 2 years ago
I dig the D2 LOD. :P
SingleTMat 2 years ago
i did eveything you said and i can get boot from bt3. But when try to open konsole, the size thingy doesnt go away and i cant type anything. What should i do?
rotiman12 2 years ago
so where do i get the BT3 to put on muy USB?
ssargman 2 years ago
Vista i mean.
F0H1 2 years ago
will this work on 64 bit windows?
F0H1 2 years ago
hey i can't get it to worki go into the bios after doing all that and set the boot priority to hte flash drive first and it just ignores it and goes straight to vista?!?!
HUm4ns 2 years ago
run the bootinst.bat as administrator, thats should fix your problem
phait08 2 years ago
thank you very much It was very useful....
KAMUI2007 2 years ago
WHen i start up backtrack, it says "triggering ubdev" i think it was. Then the computer freezes. It is like this for all modes. Even when i take the usb out the picture is still there...
PLZ HELP!
btw, thanks for nice vid
BatteriPakke 2 years ago
Comment removed
BatteriPakke 2 years ago
Comment removed
BatteriPakke 2 years ago
Work for me , Thank you so mush
danielhb1988 2 years ago
Thanks for the positive feedback
phait08 2 years ago
is this work on backtrack 4 ?
othmanOCP 2 years ago
estoi casado de buscar y buscar Alguien que sepa .bueno tengo todoa esto en nel usb pero no ocure nada solo me dise que está instalado pero siguen solo las dos carpetas en el pendrive
elshekinaencanarias 2 years ago
so how do i use windows again ... assuming that this will mess up my boot order
anurangax27 2 years ago
nope. you can just restart the system without the usb inserted.. lol.
and if you are really paranoid you can change the boot order when you startup:
hit f12. may be differnet on your computer.
BatteriPakke 2 years ago
thanks man ... i dont wanna ruin my laptop cuz i just bought it ... but f12 is the key on my comp .. thanks again
anurangax27 2 years ago
no problem :)
BatteriPakke 2 years ago
hi thanks for the vid...
but i'm having some problems, after reboot and run from usb device, there is many opciin, but unfortunaly none of them works... when I choose any, just appear a black screen and nothing else...
can someone helps???
thanks
thats13 2 years ago
i had the same problem when i first started backtrack a couple years ago... it sucks, and theres alot to explain.. first try goin on the remote exploit forums (theyre the developers) but to give a little advice, when at the boot up have the option highlighter where you can start in graphics mode (kde) hit tab, then hit space, and type acpi=off noapic and then hit enter, and boot up.. see if that helps at all
phait08 2 years ago
can someone help me
bujang1986 2 years ago
Be a little bit more specific please.
xstream82 2 years ago
lol diablo 2 expansion set, i ve got it too
good game good game XD cant wait for diablo 3
tommek47 2 years ago
me either, right now im playing silk road online, and neo-steam to keep me busy D:
phait08 2 years ago
cool. you have diablo 2 expansion xD
yOuLiEd 2 years ago
How do you shutdown the computer when running from the usb as when i goto shut the computer down it just says end current session and then takes me to the backtrack login screen.
doggyme1 2 years ago
Setting up boot record for G:, wait please...
Accessing physical drive: Access is denied.
Did not successfully update the MRB; Continuing..
Disk G: should be bootable now. Installation finished.
WTF?
OctoberUploader 2 years ago
when opening up the cmd in windows, try to ruin it as an admin by right clicking on cmd and going to run as admin
billythekiddrummer 2 years ago
will i still be able to use windows after i follow this video
doggyme1 2 years ago
yes, absolutely
phait08 2 years ago
well u install Bt3 on ur USB not HDD
milorad3232 2 years ago
If you have to ask a question like that, maybe you shouldn't be using BT3.
brent0071 2 years ago
ok
i downloaded BT3 for usb
after download was done i got a rar file i extract it and i got the boot and BT3 folders
after that i Open the bootnist.bat and it says that E: should now be bootable after restarting and changing that boot modes to removable disk first i still cant boot it can u help?
thanks
arvizu619 2 years ago
any error messages? or... is it just not even reading the usb at all? try putting that bad boy in another usb port, restart and re-check the boot order. if vista make sure you do everything as administrator
phait08 2 years ago
okay now i was able to get into BT# but once in i went to internet then check connections or somethign liek that and it told me a message that said that there werent any connections found and that the connection browser was going to close.. is my card not compatible can u tell me?? i got a:
Intel(R) WiFi Link 5100 AGN and a
Realtek RTL8168C(P)/8111C(P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
My laptop is a Asus g50Vt X1
And im using windows vista
arvizu619 2 years ago
im not too sure about that wireless, but have you tried hooking up a wired connection?
I cannot find your card on the supported hardware list for Back Track on the Back Track wiki. If you dig around the remote-exploit forums I'm sure you'll get the info on your wireless card.
But, for now my advice is try to get a wired connection, and if that works out for you surf the net to find the dirt on your wireless, if it ends up not being compatible google "hcl wireless" and find one that will work
phait08 2 years ago
Sweet tuts you have. On this one I believe it's easier to just go into the Boot folder and click "bootinst"
gx51575 2 years ago
yeah, you are right lol... and thank you for the positive feedback
phait08 2 years ago
NICE one thx
lababacke415 2 years ago
Dude, Nice Vid.. This Helped Me Alot... I Ran BT3 Today In School And Cracked Some WEP Man... lol..
rated 5/5 and subscribed
DevHacks 2 years ago
lol very nice, have fun and thanks for the subscribe
phait08 2 years ago
If I take out my usb flash drive could I start up in windows cause that's wut I kind of need xp/linux box.
n3tf1r3 2 years ago
yes sir
phait08 2 years ago
nice tut found it helpfull
krew7900 2 years ago
i saw in another vid that backtrack 2 had the user as root and pass as toor is it the same in 3?
1k1llc47s 2 years ago
Nice video, thank you, but how much flash drive memory do you need?
ramoj02 2 years ago
a 1gig will work just fine
phait08 2 years ago
Thanks.
I installed everything right. I restarted my computer and boot the USB. And i got an error says:
"Could not find kernel image: Linux"
Did I do something wrong?
ramoj02 2 years ago
make sure if youre running vista you run bootinst.bat as administrator
phait08 2 years ago
Yeah i got same thing have you fixed it? if so help me do it :p
1k1llc47s 2 years ago
Yeah I got it. Format your USB as FAT not FAT32
ramoj02 2 years ago
yeah thanx, i found out the same day X^D, thanks though...
1k1llc47s 2 years ago
lol. thats good. and no problem
ramoj02 2 years ago
So you got it to work formatting your flash drive as FAT and NOT as FAT32?
Cause I tried FAT, to no avail.
I'm gonna reformat with FAT32 to see if its any better.
Wonder if BT3 cares if its FAT or FAT32?
EuropaBloke 2 years ago
Here's my problem...
I did all you said. I went to BIOS before all of this and set my boot priority to 1.removable drive 2. cd/dvd and 3. hard disc. And after I reset my computer it still doesnt boot from USB. Help me out here, please!
InfinityNS 2 years ago
Lol, how noobish of me! I got it :) Just done a little bit of poking around in BIOS and saw where I made a mistake :D :D I guess i asked for help to early :) Great videos btw. Very useful!
InfinityNS 2 years ago
lol okay man, glad to hear it. and thanks for the positive feedback!
phait08 2 years ago
ahhh thats easy :) thanks man. i just did it by slapping those 2 files without formatting or installing .bat into it. what kind of tech am i ;) thanks again .
AtomicPhill 2 years ago
np, glad my vid is helping people
phait08 2 years ago
WTF how could u people possibly screw this up it works fine thx for the tutorial.
SimplyMagic123 2 years ago
thank you for the positive feed back
phait08 2 years ago
if your running vista make sure you run the command prompt with admin rights or it may say "Did not successfully update the MBR"
Masterstockli 2 years ago
A Backtrack 3 tutorial using Windows? WTF?
mordsgaudimachen 2 years ago
good observation
phait08 2 years ago
just use winRAR
Digadogup 2 years ago
wow dude you told us what we needed to know to get this working
good job
only got 4 stars for this cus i hated the crappy music hehe
tobyreynolds 2 years ago
lol well i dont like your music either =P
rather listen to i killed the prom queen, or godless crusade.. but yeah metal for life
phait08 2 years ago
got the same thing here
KennYA51 2 years ago
i love daemon tools
phait08 2 years ago
I used Unetbootin, works great on bt3 iso file
gaia8811 2 years ago
I don't know if some people are having a hard time finding what to open the iso file, but you can use winrar.
Works like a charm ;)
dethyl 2 years ago
ive installed bte on my usb drive, i try to bbot from it and it comes up with a blackscreen and says syslinux load error : boot error what could this bee!!!!! please help me someone
DistortionGreen 2 years ago
it means that that you FAIL EPICLY
Sliveix 2 years ago 4
redo everything, if all else fails consult the remote-exploit forums.
phait08 2 years ago
my friend
username ?????
password ??????
zong888 3 years ago
root & toor
DutchNelson 3 years ago
if you have dual core processor, disable the ACPI option from BIOS (Power tab) if it doesn't boot from USB (if the image remains black and nothing else shows up)
p.s.: how do I set backtrack 3 final (from usb) on persistent mode? on reboot i loose every config i am making
ConTroLLFlubber 3 years ago
i had the same problem as the 2 guys below me but i swiched to an administrative acc and it worked. idk for u guys
h0lychit 3 years ago
yea i get the same problem as glitchbusters2
what do i do?
raph1428 3 years ago
You over complicated this. To make it more simple, grab a copy of 7zip or WinRAR and drag+drop the files into a freshly formatted stick or SD card, and double click the .bat
xD
thepcdude 3 years ago
true that nukka!
phait08 3 years ago
can i install it to a SD card instead for usb?
manstarson 3 years ago
im not actually 100% sure how to do that
try the remote-exploit forums
phait08 3 years ago
Yes, you can.
thepcdude 3 years ago
Thanks for the video, very helpful. One question though. How much memory do you recommend the usb drive to have?
trureaper 3 years ago
atleast 1 gb
phait08 3 years ago
nice, thanks a lot
sesisco 3 years ago
I have a problem.
After restarting my pc i have only black screen when i want to boot BT3 from usb.
Can someone help me ??
goorec83 3 years ago
could be a video issue. check out the remote-exploit forums.. i handled alot of problems with video issues over there... or you could just PM me and ill help you personally.
phait08 3 years ago
i have the same problem...ps i`m instaling it on a memory card...after i restart my laptop i chose boot from memory card and all what appears is _...i don`t now how to send private message...
dragosh43 3 years ago
sorry bro's i have no experience with putting BT on a mem card
phait08 3 years ago
i got the same problem.. a black screen, no boot. so, I changed the memory card with a brand usb stick and now it's working.. i think some usb sticks are not recognized by eeePC BIOS..
florineiiiiiii 3 years ago
round of applause i love you i can now run backtrack 3 thank you i love you :) as a friend :) lmao :P:P
EnZtricks 3 years ago
lol no problem man, glad i could help
phait08 3 years ago
Im having problems with the installation. An error message keeps popping up after i type in "bootinst.bat". It says "Exception Processing Message c0000013 Parameters 75b6bf7c 4 75b6bf7c 75b6bf7c". I have downloaded the usb version from the site, and extracted the correct files from the iso. I have done all of the instructions that you said above. Please help!!!
iambestever 3 years ago
try reformatting your USB and doing the whole process all over again. if that fails, give this site a read
consumingexperience(dot)com/2007/11/windows-no-disk-exception-processing(dot)html
(replace the (dot)'s of course)
phait08 3 years ago
heh thanks for the video, I'm just roaming YouTube harvest videos for offline mode if Internet2 ever arrives.
I notice you also play Diablo 2 LOD, Thats an excellent game :) I had a few accounts there for many years. Its a real annoying installation process [Diablo2] lol.
Cheers.
cdenver 3 years ago
same with me, i just recently got bored with D2 though, lol. i've played it for years as well... just waiting for D3 to make an appearance, but until then i havent been gaming online really
cheers
phait08 3 years ago
great video, i currently got my bt3 to work i'm just doing some checking and getting dictionary ready for WPA and stuff..BTW some people may be difference letter for their USB. mine was F: and others may be K: like yours or E:. thanks for the vid, well explained...5*
madew2 3 years ago
thankyou for the positive comment :D
phait08 3 years ago
Hi thanks for the vid.
But during the process I'm recieving a error-message. It comes up when the process is making the usb bootable. Although the error (error about syslinux) the process message indicates that the usb is succesfully bootable.
If I tried it out. It wont boot!!!
I downloaded the iso-file directly from remote-exploited!!
nl9112 3 years ago
try re-formatting your flash to fat32, then re-trying the process of installing, if that does not work, send me a PM
phait08 3 years ago
WTF I downloaded the usb version, dropped it into the stick after formatting it first, and all I see is the same one file, not the 2 you show, How are you getting 2 files to drop in there, don't tell me it splits like an cell.
dseldown 3 years ago
All 3 downloads are ISO,s where or how are you getting these 2 files, I tried extracting it into a folder and I get a shit of files, wish I knew which of them to pack into these two folders, Tired of booting BT3 from CD and want to USB bootit!
dseldown 3 years ago
bro, read the description...
you have to get a tool like daemon tools to extract the folders from the .iso
get daemon tools, mount the .iso and extract the two folders "BT3" and "BOOT" from it, to your USB
phait08 3 years ago
song?
noname250593 3 years ago
"winters bliss" i found it on the newgrounds audio portal
phait08 3 years ago
hey phait nice vid
i have a major issue, not with ur instruction but with me bios settings
i followed your instructions bit by bit with succes but when it came to trying to boot the usb flash drive i couldnt find it on the list of bootable items, i tried diffrent usb ports and even tried plugging it into a usb hub
please help!
P.S: im running windows vista home premium on a acer aspire 5710g notebook, 4gb ram, two 69 gb hdds and an intel centrino duo processor
joeystar8888 3 years ago
im a bit drunk off my ass right now, its been a couple days since your question.. any luck with solving your problem? wierd u cant bott it first from your bios, it is plugged in while u try to boot it via bios? if not bios is there some sort of "f" key for boot options rather than just going through boot order from bios? arrrrrr get back to me whilst i take another shot
phait08 3 years ago
hahah lol sounds like ur havin fun
neways i got BT3 workin on a pc running xp and it worked fine, now all i need to do is teach myself how to use most of the programs
anyways i tried ur advice with no such luck, i looked at the boot options but it didnt list it there and it was plugged in
joeystar8888 3 years ago
thats weird bro.
well just use what u got workin, if u need help with any programs PM me
phait08 3 years ago
As I can see you showed us how to make it bootable on USB over windows XP in cmd.
That means that you have Linux on other HD so you can dual boot xp and linux, right??
Backtrack is only for linux comaptible, so can you explain how could you dual boot or make a video about it. how to dual boot linux and backtrack 3?
Please answear!
trzamifinger222 3 years ago
Actually, BT3 is an operating system based off of Slackware. It's Linux in itself, so you don't need a prior installation of Linux on your machine.
phait08 3 years ago
Thx for the reply phait, I have BT3 on cd and it runs smooth( it boots up and I get to see what i'll be working with). Meaning I get to do everything on it but actually use it. I am still in the middle of getting a compatible adapter. However I've tried to make a USB bootable and no mater what tutorial I follow it just doesn't work. Could it be my Laptop? Though I don't think so. I get a Kernel error.
Darkbain 3 years ago
As far as adapters go I recommend getting the Hawking HWUG1.
Hawking HWUG1
* Driver: rt73
* Chipset: ralink
* Injection and monitor mode work fine, just have to "ifconfig rausb0 up" and it works
I have it with the High Gain Antenna you can buy for it, as well. As far as that adapter goes though, I bought it (and still use it) and it works right out of the box.
As far as your USB problem, no, I don't believe from what you've told me it's a laptop issue.
phait08 3 years ago
This has a mac address changer how could anyone be caught? Just curious.
Darkbain 3 years ago
all depends on ones computer knowledge and the right timing. obviously if you crack your neighbors WEP key they probably wont notice (unless they are computer savvy which chances are they are not having WEP encryption (lol). but lets say you change your MAC and they are computer savvy and are in the right place at the right time, noticing an outside connection on their system(s)/machine(s) they could trace the wireless signals and where they are coming from if givin the right amount of time.
phait08 3 years ago
hey im new to thise computer stuff and i have a dell laptop with vista home premium and i really need to download back track so i can get a better internet conection.and whats a usb???
please reply i need help! :(
treiselBobby 3 years ago
cracking someones elses WEP and accessing their network is illegal without permission. I only condone pen-test upon your own system(s)
phait08 3 years ago
hi
great review
bt3 is a os correct ?
CRAKIZGOOD 3 years ago
yes, its a slackware based linux distrobution
phait08 3 years ago
dude im not going to arrest u or something rofl ok um i need help cracking MY wep and accessing MY network using MY permission l0l ok dude???
treiselBobby 3 years ago
hah that's more like it =p send me a PM
phait08 3 years ago
why is ti that every one that is cool and likes to do cool stuff like computers and knows stuff also plays d2 lod hehe i think that i found a connection here D2 LoD = Smartness yep :p Nice Vid by the way
DarkRadience 3 years ago
lol thanks for the comment. D3.. cant wait even though its a ways away
phait08 3 years ago
I mean.... Microshit. :]
CyraxianOverLord 3 years ago
youre right, it should be formatted to FAT32
but in some cases NTFS works, but go with FAT32
phait08 3 years ago
You never mentioned what type of file system you formated it too. I would like to know, thanks. I'm going to assume not NTFS since that is proprietary to microsoft.
CyraxianOverLord 3 years ago
what do you mean unzip it?its an ISO disk image file there is no "unzip"
xmodrock 3 years ago
install winrar
dougblur 3 years ago
Nice vid Phait.
What size of USB drive do you suggest? It would need to be large enough for a good dictionary. Also know where to get a good dictionary?
dougblur 3 years ago
i suggest a 4gb-8gb USB. yes, if you send me a PM message i can link you up to a huge wordlist
phait08 3 years ago
where do you get backtrack 3? when ever i download it i get it as an ISO. should i9 just copy over the whole ISO?
xmodrock 3 years ago
you have to unzip it
SupraDream08 3 years ago
get daemon tools to extract the folders from the .iso
phait08 3 years ago
Can you tell me how to get the computer to boot from the flash drive because even after I reboot it it still loads Microsoft and not Backtrack
Aparsanlal 3 years ago
you have to change the settings in your bios
SupraDream08 3 years ago
diablo for live ;) (you must be looking forward to D3 )
Nice video btw, but what does Backtrack do?
moviecrewz 3 years ago
backtrack is a pentesting linux distro
it pentests lol
phait08 3 years ago
and yes i am looking forward to D3 very much so as well
phait08 3 years ago
have you seen the first in-game footages? they rock :D
moviecrewz 3 years ago
fuck yeah i did
... the witch doctor? and the new barb skills? its gunna rape
phait08 3 years ago
Sure thing ^^
moviecrewz 3 years ago
omg someone needs to help me.i did everything right i went into cmd did all that i went to the bootinst ran that and when i try to boot its just a black screen witht he blinking line its annoying
cmdzero 3 years ago
u got a video problem, type xconf then enter should solve it, then try startx again
Bonsaverh 3 years ago
Yes I had tested on vista, and it works !
maxmaximuss1 3 years ago
Has anyone ever tested this tutorial on Windows Vista?
vlally88 3 years ago
Very nice and very easy, even a script kiddie could do it!
OmegaIris1 3 years ago
does backtrack run on windows????i heard that btrack just work on linux...plz reply
Thx
Fisher1898 3 years ago
backtrack is linux. its a type of a linux distribution dedicated to pentesting. you run it right off a usb stick or cd.
phait08 3 years ago
nice clear step-by-step tutorial thx
Bonsaverh 3 years ago
does backtrack run on windows????i heard that btrack just work on linux...plz reply
Thx
Fisher1898 3 years ago
hey Fisher, Backtrack does run on windows if you use VMWARE. It will run in a virtual machine environment. Personally, id follow this tutorial and run it off a flash drive, once you get a little experience playing around with it while on a flash drive, go to the BT3 website and down load the VMWARE version.
OmegaIris1 3 years ago
thx man
Fisher1898 3 years ago