@sailcat9 a how-to-not video! the yellling doesn't fit his stupid haircut either. clip-clip-clip-clip-clip-clip, the only thing he forgot to clip was his damn hair. And STFU! Gues that what happens when searching youtube on hawksky.
Better to mount ESC inside with plenty of air circulation. Stock ESC's on Hawk sky should be replaced as they tend to fail. Mine did so on the maiden flight. I upgraded to a 36A so it would run cooler inside.
I made my own plywood motor mount from 1/4" marine ply..
Purchased most everything from Grayson. Even a second Hawk Sky!
can someone tell me if a 5000kv brushless motor is too much for the Hawk sky? or a 3000kv is also too much. because i can get a 35 amp ESC along with a 5000kv or 3000kv motor please answer :)
would the 480/500 outrunner work on the hawksky from grayson? i am using my hawksky to record videos but i also wont a motor that has POWER and il looking for a flight time around 10-15min. I im using 11.1v 20c 2200mah lipo but the stock motor still lacks the power i wont. any ideas on better motor combo?
HEY GUYS! I HAVE A PROBLEM. DO YOU GUYS HAVE ANY IDEA ON WHAT THE EXACT NAME OF THE AILERON CONNECTORS IS? THE Y CONNECTOR THAT GOES INTO THE RECEIVER... i need to buy 1 because i received this plane from a crappy distributer and it came broken, stupidly, i soldered it back on but it ddnt work and my warranty VANISHED. PLEASE HELP! asap! I WANT TO GET MY WINGS!
hey reply me man... You talked about upgrading, but what does it do? what does longer rudder, elevator etc do? and the stronger motor what does it do?
@graysonhobby I'm too cheap to buy most "brand name" stuff but I buy Hot Glue. You should buy real glue. Oh wait, you're GraysonHobby, and it's a joke!(and so was mine....after I saw your username LOL)
1-With that wood motor support , can the motor be bolted/unbolted or one has to rip the glue every time the motor has to be changed for any reason? (screws will not "chew" good to the wood forever)
2-The enlarging ailerons looks easier than cut out new larger ones.. apart from rolling .. how does that affect the rest of the flight envelop? (normal flight, gliding .. etc)
i am puttting my FIRST!!!!! microjet v3 on my hawk sky and i have 2 questions
1. Would a 30 amp esc work with the microjet?
2.Am i supposed to glue the wings on with the new motor, because dave said dont glue your wings on, but with all the speed from the motor i dont know if they would stay on?
i am puttting my FIRST!!!!! microjet v3 on my hawk sky and i have 2 questions
1. Would a 30 amp esc work with the microjet?
2.Am i supposed to glue the wings on with the new motor, because dave said dont glue your wings on, but with all the speed from the motor i dont know if they would stay on?
i am puttting my FIRST!!!!! microjet v3 on my hawk sky and i have 2 questions
1. Would a 30 amp esc work with the microjet?
2.Am i supposed to glue the wings on with the new motor, because dave said dont glue your wings on, but with all the speed from the motor i dont know if they would stay on?
i am puttting my FIRST!!!!! microjet v3 on my hawk sky and i have 2 questions
1. Would a 30 amp esc work with the microjet?
2.Am i supposed to glue the wings on with the new motor, because dave said dont glue your wings on, but with all the speed from the motor i dont know if they would stay on?
i am puttting my FIRST!!!!! microjet v3 on my hawk sky and i have 2 questions
1. Would a 30 amp esc work with the microjet?
2.Am i supposed to glue the wings on with the new motor, because dave said dont glue your wings on, but with all the speed from the motor i dont know if they would stay on?
i am puttting my FIRST!!!!! microjet v3 on my hawk sky and i have 2 questions
1. Would a 30 amp esc work with the microjet?
2.Am i supposed to glue the wings on with the new motor, because dave said dont glue your wings on, but with all the speed from the motor i dont know if they would stay on?
i am puttting my FIRST!!!!! microjet v3 on my hawk sky and i have 2 questions
1. Would a 30 amp esc work with the microjet?
2.Am i supposed to glue the wings on with the new motor, because dave said dont glue your wings on, but with all the speed from the motor i dont know if they would stay on?
hi great vid, i am looking for the microjet v3, wooden adapter, 30a esc, and a couple of props all for my hawk sky can you put a package together for me and do you post to the uk.
BTW....I, for one, LOVE the "infomercial" style of the new vids. I am getting really sick of videos that are of a great upgraded plane or scratchbuild flying/crashing but we never get to see HOW it was done.....the good stuff!
so I am upgrading my hawksky, with the parkjet supersonic brushless combo package from grayson.. my question is what prop do I use? The originals? I want to get one from grayson too, but it obviously has to be a pusher prop... right? New to all this so go easy on me... so which pusher prop is best for my application? All help is appreciated!
@rele30 That motor is built for the 6x4, you can get the "pusher" or regular APC 6x4, the only true difference is one is made to turn clockwise and the other counter-clockwise. They BOTH can be used for this, just always make sure the 6x4 letters on the prop face the direction the airplane is traveling. If you need anymore help e-mail me: RCSPowers.ScottL@gmail.com Thanks and good luck!
Scott, you are awesome. Don't let the haters discourage you from doing what you love. What I don't get is when people watch your videos and say " Dave is better". Well, these aren't daves videos, they are yours and they're awesome.
Hey its Scott Lott the hippie! Great to see you again and good job on the video! I put a 2826/6 super mega-jet on my HS. I needed to shim the motor up to keep the plane from nosediving when you throttle up. DId you need to with the parkjet?
Great! I just mounted my microjet v3 without the mount because I couldn't find the template, then a week later Scott goes and makes a video about it. But its good to see the team working on RC stuff and not glorified squeegees... :D
@RCSuperPowers Oh, what a shame! The correct screws are 0.4325345234 x .02342342343, or you might also use a 0.4325345233 x .02342342342 or a 0.4325345232 x .02342342342. You can purchase these by the case or by the pallet at Simon's Screw Supply on Seventh and Sixteenth in Setauket.
No offence but it kind of reminds me of the ads with billy mays in them! You should make it like them and then it would be really funny! still great though
I was wanting to put the other motor on it, the ParkJet Combo 2212-06 V2 Super-Sonic Brushless Combo.... would that give me more power? Any help as I am a total newb!
Is it ok to glue the rudder to the canopy?
metal4ever1965 1 month ago
CAN SOME ONE TELL ME IF I CAN USE .90 MARINE OUTBOARD 4 CYCLE NITRO JET 4 CYCLE ENGINE ON THIS PLANE?
metal4ever1965 1 month ago
Insanely weird clip
chowmonkey2002 2 months ago
stop smoking meth dude
metal4ever1965 2 months ago
Good video thanks
24262748 2 months ago
Nice job Scott !
24262748 2 months ago
This should be used as a how-to video on how not to make how-to videos. Fail.
sailcat9 3 months ago
@sailcat9 a how-to-not video! the yellling doesn't fit his stupid haircut either. clip-clip-clip-clip-clip-clip, the only thing he forgot to clip was his damn hair. And STFU! Gues that what happens when searching youtube on hawksky.
LockedPadLock 2 months ago
why the fuck is that idiot yelling all the time..
marlonbrando007 3 months ago
@marlonbrando007 Low life language :-(
24262748 2 months ago
What a about the mega jet on the hawk sky?
justfly60482 3 months ago
Better to mount ESC inside with plenty of air circulation. Stock ESC's on Hawk sky should be replaced as they tend to fail. Mine did so on the maiden flight. I upgraded to a 36A so it would run cooler inside.
I made my own plywood motor mount from 1/4" marine ply..
Purchased most everything from Grayson. Even a second Hawk Sky!
Kamatis48 3 months ago
ultrajet combo worked great .. 6/4 prop
420choky 5 months ago
Wow Dave.... This hobby is keeping you young! LOL... :)
ehsanaman222 5 months ago
What Hex wrench do you use to unscrew the motor from the engine mount
PJWIM 6 months ago
So How am I suppose to make that wooden mount?
youronlycow 9 months ago
@youronlycow We sell those at Grayson Hobby dot com
BurelPhotography 8 months ago
can someone tell me if a 5000kv brushless motor is too much for the Hawk sky? or a 3000kv is also too much. because i can get a 35 amp ESC along with a 5000kv or 3000kv motor please answer :)
tiednotes45554 9 months ago
would the 480/500 outrunner work on the hawksky from grayson? i am using my hawksky to record videos but i also wont a motor that has POWER and il looking for a flight time around 10-15min. I im using 11.1v 20c 2200mah lipo but the stock motor still lacks the power i wont. any ideas on better motor combo?
DarkJet101 10 months ago
hahahaha your not santa clause lol xD
heyallright199 10 months ago
This has been flagged as spam show
wtf just happened
BiggRob1221 11 months ago
This has been flagged as spam show
HEY GUYS! I HAVE A PROBLEM. DO YOU GUYS HAVE ANY IDEA ON WHAT THE EXACT NAME OF THE AILERON CONNECTORS IS? THE Y CONNECTOR THAT GOES INTO THE RECEIVER... i need to buy 1 because i received this plane from a crappy distributer and it came broken, stupidly, i soldered it back on but it ddnt work and my warranty VANISHED. PLEASE HELP! asap! I WANT TO GET MY WINGS!
tiednotes45554 1 year ago
lol XD "dayyyypron" sounds like day porn
paulius360 1 year ago
BILLY MAYS HERE, FOR RC POWERS!
N37BU6 1 year ago
hey what angle should the foam strips be..angled down or level with the bottom of the wing??
badgolf1 1 year ago
Oh Very Nice! Scott's funny too...
legoliker7517 1 year ago
what is an esc???
AirForcedude5 1 year ago
@AirForcedude5 Electric Speed Controller. You need it to control the Motor.
legoliker7517 1 year ago
hey reply me man... You talked about upgrading, but what does it do? what does longer rudder, elevator etc do? and the stronger motor what does it do?
Cowdrinkingwater 1 year ago
i have a 4ch hawk sky..and i just got the mjv3..do you need a bec too???
badgolf1 1 year ago
@badgolf1 No u don't. the esc has a built in BEC, so it wont be neccessary
rcplanesofma24 1 year ago
@rcplanesofma24 THANK YOU THANK YOU!!!
badgolf1 1 year ago
Will elmers stick glue hold the motor? Im too cheap to buy real glue. Oh wait, I ate the glue while building the witch.
graysonhobby 1 year ago 2
@graysonhobby I'm too cheap to buy most "brand name" stuff but I buy Hot Glue. You should buy real glue. Oh wait, you're GraysonHobby, and it's a joke!(and so was mine....after I saw your username LOL)
legoliker7517 1 year ago
what prop did you use?
starcraftluver62 1 year ago
I have 2 doubts..
1-With that wood motor support , can the motor be bolted/unbolted or one has to rip the glue every time the motor has to be changed for any reason? (screws will not "chew" good to the wood forever)
2-The enlarging ailerons looks easier than cut out new larger ones.. apart from rolling .. how does that affect the rest of the flight envelop? (normal flight, gliding .. etc)
sparrowlt 1 year ago
What size are those 'hex screws' on the motor mount @ :12 Mine came out....and i need more :(
moron32 1 year ago
how do you buy the hawk sky with no electronics? i already have a transmitter and receiver.
rogerposehn 1 year ago
how do you buy the hawk sky with no electronics?
rogerposehn 1 year ago
This has been flagged as spam show
Hey scott
i am puttting my FIRST!!!!! microjet v3 on my hawk sky and i have 2 questions
1. Would a 30 amp esc work with the microjet?
2.Am i supposed to glue the wings on with the new motor, because dave said dont glue your wings on, but with all the speed from the motor i dont know if they would stay on?
RcSkyFlier 1 year ago
This has been flagged as spam show
Hey scott
i am puttting my FIRST!!!!! microjet v3 on my hawk sky and i have 2 questions
1. Would a 30 amp esc work with the microjet?
2.Am i supposed to glue the wings on with the new motor, because dave said dont glue your wings on, but with all the speed from the motor i dont know if they would stay on?
RcSkyFlier 1 year ago
This has been flagged as spam show
Hey scott
i am puttting my FIRST!!!!! microjet v3 on my hawk sky and i have 2 questions
1. Would a 30 amp esc work with the microjet?
2.Am i supposed to glue the wings on with the new motor, because dave said dont glue your wings on, but with all the speed from the motor i dont know if they would stay on?
RcSkyFlier 1 year ago
Hey scott
i am puttting my FIRST!!!!! microjet v3 on my hawk sky and i have 2 questions
1. Would a 30 amp esc work with the microjet?
2.Am i supposed to glue the wings on with the new motor, because dave said dont glue your wings on, but with all the speed from the motor i dont know if they would stay on?
RcSkyFlier 1 year ago
Hey scott
i am puttting my FIRST!!!!! microjet v3 on my hawk sky and i have 2 questions
1. Would a 30 amp esc work with the microjet?
2.Am i supposed to glue the wings on with the new motor, because dave said dont glue your wings on, but with all the speed from the motor i dont know if they would stay on?
RcSkyFlier 1 year ago
This has been flagged as spam show
Hey scott
i am puttting my FIRST!!!!! microjet v3 on my hawk sky and i have 2 questions
1. Would a 30 amp esc work with the microjet?
2.Am i supposed to glue the wings on with the new motor, because dave said dont glue your wings on, but with all the speed from the motor i dont know if they would stay on?
RcSkyFlier 1 year ago
Hey scott
i am puttting my FIRST!!!!! microjet v3 on my hawk sky and i have 2 questions
1. Would a 30 amp esc work with the microjet?
2.Am i supposed to glue the wings on with the new motor, because dave said dont glue your wings on, but with all the speed from the motor i dont know if they would stay on?
RcSkyFlier 1 year ago
Comment removed
bonytone 1 year ago
Comment removed
bonytone 1 year ago
hi great vid, i am looking for the microjet v3, wooden adapter, 30a esc, and a couple of props all for my hawk sky can you put a package together for me and do you post to the uk.
bonytone 1 year ago
great vid, nice work scott.
zyoungson215 1 year ago
BTW....I, for one, LOVE the "infomercial" style of the new vids. I am getting really sick of videos that are of a great upgraded plane or scratchbuild flying/crashing but we never get to see HOW it was done.....the good stuff!
catamaranman333 1 year ago
Great job Scott hope to see you making more videos!! Your better than Dave at least you are making rc vids
justacountryboy2001 1 year ago
so I am upgrading my hawksky, with the parkjet supersonic brushless combo package from grayson.. my question is what prop do I use? The originals? I want to get one from grayson too, but it obviously has to be a pusher prop... right? New to all this so go easy on me... so which pusher prop is best for my application? All help is appreciated!
rele30 1 year ago
@rele30 That motor is built for the 6x4, you can get the "pusher" or regular APC 6x4, the only true difference is one is made to turn clockwise and the other counter-clockwise. They BOTH can be used for this, just always make sure the 6x4 letters on the prop face the direction the airplane is traveling. If you need anymore help e-mail me: RCSPowers.ScottL@gmail.com Thanks and good luck!
NuttyPro67 1 year ago
nice job scott
joshcarz 1 year ago
Scott, you are awesome. Don't let the haters discourage you from doing what you love. What I don't get is when people watch your videos and say " Dave is better". Well, these aren't daves videos, they are yours and they're awesome.
12nickjr 1 year ago
YOURE NOT DAVE!
shoopwhoopX 1 year ago 2
@shoopwhoopX AND YOURE NOT SANTA CLAUSE!
NuttyPro67 1 year ago 23
This has been flagged as spam show
@NuttyPro67 thats what you think
shoopwhoopX 1 year ago
@shoopwhoopX Of course he´s not Dave dummy he´s Scott :-(
24262748 2 months ago
Glad to see you guys are still doing videos! Does your hawk sky have a big weight in the nose, cause mine does
bobsiopener 1 year ago
Hey its Scott Lott the hippie! Great to see you again and good job on the video! I put a 2826/6 super mega-jet on my HS. I needed to shim the motor up to keep the plane from nosediving when you throttle up. DId you need to with the parkjet?
catamaranman333 1 year ago
Maybe just a bit too much Redbull.
400chevlc 1 year ago
You could be the new Sham-wow guy.Nice video! Micro Mike
Cilanae 1 year ago
R u turnin into Billymays
planeboy1000 1 year ago
You need a hair cut, Scott
NETWizzJbirk 1 year ago
Could you show the hole in the hatch again? Because I think I missed it.
hlbatesjr 1 year ago
think you could talk any louder?
aldudio 1 year ago
niiice, I already did the aileron extension... but need the motor upgrade now. Thanks a bunch...
rele30 1 year ago
only a 2 min video???!!!
GlennEnt 1 year ago
@CptEagle87 Thank for reply! I am checking to see if 6x4 fit on Hawk Sky so it cool about ur Wild Hawk mod.
jplummer72 1 year ago
This guy reminds me of Billy Mays.
DasBulk 1 year ago 5
@DasBulk Just thinking that
RedNekCoasters 4 months ago
Now what?
BurelPhotography 1 year ago
Great vid dude!
moolikeacow2 1 year ago
Great! I just mounted my microjet v3 without the mount because I couldn't find the template, then a week later Scott goes and makes a video about it. But its good to see the team working on RC stuff and not glorified squeegees... :D
TheRealAirdoo 1 year ago
Are u using APC Thin Electric 5.5 x 4.5 Reverse Rotation ? I am deaf and can't catch what u said about the size of the props. ;-)
jplummer72 1 year ago
@jplummer72 He didn't say anything about prop size, but I have the Wild Hawk with a 2200kv motor on it as well and use a 6x4 prop with success.
CptEagle87 1 year ago
yay - moar RCPowers videos!! :D
BrotherBloat 1 year ago
I did what you said ..... it flew straight into the ground !!!! thanks guys
Imbefuddeled 1 year ago
@Imbefuddeled Wait, do I pull up to go up? Or is down up?
RCSuperPowers 1 year ago 2
holy crap... nice to see ya back scott, i think we all bve expecting those rad music vids u were so good at doing lol, reat job
FlyHighRC386 1 year ago
i think you're all crazy.
kangsterizer 1 year ago
good to have you back
wkjms 1 year ago 2
I have small screws that are 0.4325345234 x .02342342342. Will those work??? plz rspnd.
RCSuperPowers 1 year ago 10
@RCSuperPowers No,you need: 0.4325345235 x .02342342343. This is very critical.
RCSonicjet 1 year ago 4
@RCSonicjet Ha! Glad someone got the jokey-joke!
RCSuperPowers 1 year ago
@RCSuperPowers hey .......i got it too.........
laithsrc 1 year ago
@RCSuperPowers when the hell will you make another video?
RCFlyingBoy2009 1 year ago
@RCSuperPowers Oh, what a shame! The correct screws are 0.4325345234 x .02342342343, or you might also use a 0.4325345233 x .02342342342 or a 0.4325345232 x .02342342342. You can purchase these by the case or by the pallet at Simon's Screw Supply on Seventh and Sixteenth in Setauket.
Killerplanes 7 months ago 3
@Killerplanes lol @ by the pallet
metal4ever1965 2 months ago
hey alright!
CoolVallieJean 1 year ago 4
No offence but it kind of reminds me of the ads with billy mays in them! You should make it like them and then it would be really funny! still great though
Wilzaza 1 year ago
Dude, you've got a microphone and it's saved to the video, no need to shout that I can actually hear you over here! :D
Anvilshock 1 year ago
Wait... I don't have a hex head.
RCSuperPowers 1 year ago 4
@RCSuperPowers perfect
laithsrc 1 year ago
I was wanting to put the other motor on it, the ParkJet Combo 2212-06 V2 Super-Sonic Brushless Combo.... would that give me more power? Any help as I am a total newb!
rele30 1 year ago
@rele30 ya that would work but easy u could snape the wings
laithsrc 1 year ago
@laithsrc thanks for thr tip, that means I get to clip the wings as I had wanted too. LOL!
rele30 1 year ago
woahhh...first view :P
tomtom4867 1 year ago