He references conservation of energy several times and yet...a perpetual motion machine violates this, so within 2 minutes his video contradicts itself.
Ever heard of a rodin coil? This is what you have except without electromagnets or fancy wiring, all that's going to happen is the drive mechanism will oscillate around center before finally stopping there.
I'm not even going to go into the losses in wire, the generator, friction, eddy currents.
to do work you need to be spreading out energy (e.g. electrical charge, heat etc)
where does this occur?
are you putting in heat?
movement?
electricity?
releasing energy locked up in a high energy compound?
what?
oh and its also a fact that all forces are symmetrical (i.e. for gravity it takes the same total amount of work to go through a tunnel or go over the hill) (assuming you have perfect regenerative braking!)
I invented a breakthrough energy source which violates the law of energy conservation. I have a PROOF that there are electrodynamic phenomena which violate the law of conservation of energy. I am looking for $30 000 fora prototype and for $3M for patents. Making a 15 kW generator will cost $1200 in mass production, value of the energy produced yearly about $10 000.
I say cheers man. i too have been experimenting with these concepts and have seen great results. these results will never be on you tube or any other public video compolation for the lesser intelegent portion of society to critisize. i would love to share ideas some time out of the public eye...
All you sceptics there have to much negative to say. sounds like out of frustration with your ignorance and lack of ability to grasp concepts "outside" the box has lead to you swearing and critisizing. Although we have known and utilized the effects of flux line vector force manipulation for ever in countless electronic components this fella is one of a very small group of people that has identified this as something that can be aplied to quantum mechanics.
by use of a strong, and a weak foce, u can use newtonian ideas to creat a motor that is off ballance both in weight, and in magnetic fields inn order to overcome the magnetic gate?
would this not prove to be self canceling, one cansels the other, it may/ MAY/ run, but be complex, expensive, and have no torque. it would suprize most folks just how hard it is to turn a shaft to light a bulb, and mad hard to run a motor to run a house, the energy content of a gallon of gas/petrol/deisle, to run an engine & drive the gennerating motor which convert to electric will never come from this magnet motor i think.
Bare wires and individual magnets and singular flux paths conserve energy in the sense that we were taught. Transferring energy between magnets is an alternative.
the thought occured after tinkering with my adams motor device-that perhaps rotation is not required-a suspended magnet just bouncing up and down.
im also trying to understand your take on 'back EMF'.
is collapsing field a better term?
the drag forces on the copper from the eddys created from the magnets induction i ssomething i have been looking at with fresh eyes-so pls eleborate for me
@dougspair prisoners may not pay but the taxpayers sure do
neoaikon 1 week ago
This has been flagged as spam show
What the hell do you think you're talking about?
weeeendog 6 months ago
Sorry, there is no such thing as a free lunch.
He references conservation of energy several times and yet...a perpetual motion machine violates this, so within 2 minutes his video contradicts itself.
Ever heard of a rodin coil? This is what you have except without electromagnets or fancy wiring, all that's going to happen is the drive mechanism will oscillate around center before finally stopping there.
I'm not even going to go into the losses in wire, the generator, friction, eddy currents.
neoaikon 9 months ago
@neoaikon I was thinking Prisoners get a free lunch?
dougspair 1 week ago
dude, show your face to see your 1st grade pupil Pinocchio nose
masster64 1 year ago
to do work you need to be spreading out energy (e.g. electrical charge, heat etc)
where does this occur?
are you putting in heat?
movement?
electricity?
releasing energy locked up in a high energy compound?
what?
oh and its also a fact that all forces are symmetrical (i.e. for gravity it takes the same total amount of work to go through a tunnel or go over the hill) (assuming you have perfect regenerative braking!)
chris12me 1 year ago
This has been flagged as spam show
I invented a breakthrough energy source which violates the law of energy conservation. I have a PROOF that there are electrodynamic phenomena which violate the law of conservation of energy. I am looking for $30 000 fora prototype and for $3M for patents. Making a 15 kW generator will cost $1200 in mass production, value of the energy produced yearly about $10 000.
H. Tomasz Grzybowski
tel. +48-512-933-540
henrykay01 1 year ago
I say cheers man. i too have been experimenting with these concepts and have seen great results. these results will never be on you tube or any other public video compolation for the lesser intelegent portion of society to critisize. i would love to share ideas some time out of the public eye...
Magnetsrdkey 1 year ago
All you sceptics there have to much negative to say. sounds like out of frustration with your ignorance and lack of ability to grasp concepts "outside" the box has lead to you swearing and critisizing. Although we have known and utilized the effects of flux line vector force manipulation for ever in countless electronic components this fella is one of a very small group of people that has identified this as something that can be aplied to quantum mechanics.
Magnetsrdkey 1 year ago
I love u man
axelbeast 1 year ago
A lot of talk but no evidence of a working version. Not surprising though as perpetual motion machines are impossible.
LiamXaoh 1 year ago 2
i think i uderstand?
by use of a strong, and a weak foce, u can use newtonian ideas to creat a motor that is off ballance both in weight, and in magnetic fields inn order to overcome the magnetic gate?
freethisone 2 years ago
@freethisone
1. strong force, within the nucleus,
2. weak force, is due to decay of nuclei, with quark change and beta emission
getting 45% free out = 100% in, 45% out, 55% energy loss.
this is not free energy, he doesnt even understand percentages. this is not free energy.
daenumen 2 years ago
@freethisone
oh and the equation he shows is wrong.
daenumen 2 years ago 2
would this not prove to be self canceling, one cansels the other, it may/ MAY/ run, but be complex, expensive, and have no torque. it would suprize most folks just how hard it is to turn a shaft to light a bulb, and mad hard to run a motor to run a house, the energy content of a gallon of gas/petrol/deisle, to run an engine & drive the gennerating motor which convert to electric will never come from this magnet motor i think.
fuelban 2 years ago
no just fucking talk old guy. do some real device, or don't take my fuckig time, whit stupid shit like this
jozsefboviz 2 years ago
bla bla bla... where is anything working? oh yeah, there isn't and it will never be :P but keep on trying and have fun :)
ekselenski 2 years ago
Funny listening to an old man make things up.
HelplessVictim 2 years ago
Your explanations are entertaining, but out of curiosity, can you send me a link to a video that shows any magnet motor actually working?
yegreskin 2 years ago
At 2:10 you show diamond shaped magnets. Nice.. I have those too! and others.... :) Thanks for sharing and keep up the great work! Dan
danswaay 2 years ago
Bare wires and individual magnets and singular flux paths conserve energy in the sense that we were taught. Transferring energy between magnets is an alternative.
syncopetra 2 years ago
Think there is only one way to generate the forces. I think you need to address that issue first.
syncopetra 2 years ago
the thought occured after tinkering with my adams motor device-that perhaps rotation is not required-a suspended magnet just bouncing up and down.
im also trying to understand your take on 'back EMF'.
is collapsing field a better term?
the drag forces on the copper from the eddys created from the magnets induction i ssomething i have been looking at with fresh eyes-so pls eleborate for me
m3sca1 2 years ago
what about a single oscillating magnet?
m3sca1 2 years ago
At least two magnets are required so energy can be transferred between them.
syncopetra 2 years ago
i was thinking of a floating magnet in repulsion with another like pole-then a very small push coil to set the system oscillation-what do you think?
m3sca1 2 years ago
more exciting everyday !!!
thanks
harpbloke 2 years ago