Cletus breaks dyno hymen in Daytona

[mrski]

Man, you really don't like this guy, do you? OK, how about his other stuff, like the interior kit, or the wide body kit? Do you know anything about those?  Had any complaints? I was thinking of getting those for my Fiero.

[Cletusbuildsjunk]

@mrski I have seen it all up close. Its all junk. He posts pictures online and you can see that stuff is warped before even leaving his shop. He posts pics of the interior, and you can see pot marks in the fibreglass work.

I have seen his choptops up close and it had pot marks all in it like a rat had chewed it.

There was a guy in florida who spent $17k for the body kit, and everything was warped, and he found a inch thick of bondo sandwhiched between fiberglass. LOL what a joke!! JUNK!

[ruger4579]

What a moron...listen you guys, don't waste your time, money, knuckle meat or anything else trying to cram a freaking Northstar in a Fiero. If you wanna haul butt for less put a 3800SC in with your Isuzu 4 speed. It bolts right in with very little mods. If that's not fast enough, build a custom 3800 from the inside out with a G6 F40 6speed. You'll still probably spend less than you would doing a stupid V8 swap and you'll wipe the asphalt with an Archie car.

[MisterHolaMan]

Then if his stuff is shit, where WOULD I got to get stuff for a 350/4.3 swap?

[Cletusbuildsjunk]

if you are going to put in a v6, you are better off going with a 3800. Tons of aftermarket, and is the motor of choice for the fastest fieros. No v8 fiero can touch the 3800 fieros.

What would you do with a 4.3? Keep it at 210 hp? The 3800 supercharged motors make more power and dont' require a $3k kit to install it as the 3800 bolts to the factory tranny.

[MisterHolaMan]

I don't know what engine to get, actually. I wish I could do a Honda K series, but that's way the hell too expensive.

[Cletusbuildsjunk]

3400 v6 from a grand am. 185 hp and lots of upgrades to take you up to around 230 hp n/a Bone stock will run a low 14 second qtr mile. it also uses stock engine mounts and bolts right to the tranny.

I am doing a 3500 in mine right now.

[MisterHolaMan]

How do I do wiring?? Mine has house wiring in it, and I undid some connections and can't find them again!

[DQ81]

What are some good sources for a 3800 S/C ?

[Cletusbuildsjunk]

google realfierotech

[vfIskullangel]

The only good thing his swaps are good for are Fiero based kitcars. Otherwise his shit is serious weaksauce.

[vfIskullangel]

WOW! thats PRETTY SAD!

[86fieroEarl]

You need a cam and a steep hill to get 80more hp out of a 4.9 ROLF!! Who cares about the wieght on one, There freaking throw away engines, You blow one might as well hit a junkyard (theres plenty) The heads are very restrictive on those engines, Yeah they make plenty of torc, But runs out of breath at high rpm 4000 LOLZ

[jmbishop05]

This video is stupid, this only proves Cletus can't tune a car. Why don't you make fun of how he uses solid and rubber mounts, how his adaptor plates are to thick or his terrible water pump setup.

[cletustheloser]

Don't need to, you just did it for me.

[julietdayanara]

o and it was all done by ME i dont need do archie kit bull$%&#

[julietdayanara]

ok how dumb do u sound havent u done any reserch on an 4.9 from a 95 deville they pump out 200hp stock not to mention i did a entire msd ignition kit top to bottom plus switched some pullys k&n air filter a higher cam custum oil cooler for engine to run cooler bigger injectors so i dont worrie i am around 280 hp not to mantion the weight i shaved off my car now its at 2400lbs i thought u knew weight alot to do with performance u dumb #$%& what u have to say now and if u want i can send proff

[cletustheloser]

I know the 4.9 makes 200 hp and has no powerband. They run high 14's low 15's in the qtr mile and make 150 whp in stock form. You think adding a cam and a filter gave you 80 more hp? BWHAHAHA you sound dumb as hell. MSD adds no hp, niether do injectors.

Yes Please send proof. I want to see your dyno numbers of 230 whp and I want to see proof of your car on a scale with it weighing 2400 lbs.

Please tell me your car will be in Daytona this year for the fiero show.

[julietdayanara]

my 6speed tranny doues the rest of the work its not all about high hp

[cletustheloser]

just as I thought. you make less then 230 whp. I bet way less. I bet your 4.9 turd puts down 150 whp and you are talking sh!t about how fast it is? Hahaha dude and then you say you have a 6 spd tranny? Hahahah dude thats hilarious. a tranny that is geared for a small displacement wide powerband engine like a turbo ecotech, and you mate it to a engine that has no powerband and a large displacement. Hahaha your car is a turd, you would lose to the v8 in the vid and you know it. Lose to me2

[cletustheloser]

Not to mention I love how you think your tranny will make up for your deficiency in horsepower. Trannies don't add power so not sure why you think 150 whp is enough to beat anything more then a 92 civic auto dx.

[julietdayanara]

like i said not only is my 4.9 faster but abiously better looking hands down hahahaha

[cletustheloser]

your 4.9 is faster then what?  This sbc v8? Maybe but its not faster then my car. BTW, this isn't my car in the vid. This car is v8 archies car. My car would mop the floor with you. I would call you my ragmop.

But for arguments sake your 4.9 puts down more then 230 whp? Got the dyno sheet or video for proof?

[julietdayanara]

what engine is that on ur fiero it sure sounds weak

[cletustheloser]

you obviously can't read the description. Its a 377 cubic inch SBC v8 that V8 archie installed and tuned.

You are right about one thing, it does sound weak, and is weak just like all the other cars he has built. Which is why this thing only put down 230 whp from 377 cubic inches!! HAHAHAH V8 archies ls1 ran high 13's at the track!!! HAHAHA thats weak too

[cjtkvincent]

Obviously not all small block chevy's perform like this one, looks like a truck engine. You gotta know what you're doing to make it scream and plenty of people do.

[cletustheloser]

you are right plenty of people do know how to make a sbc fast. Its just that V8 Archie AKA cletus doesn't. This video and the other v8 videos on here are living proof of this fact. He hacks up fieros to put big v8's in that run 13's in the qtr mile, break trannies, break cradles, and breaks axles. He uses a 30lb flywheel!! Bwahhaha 30 lbs is retarded!!

[funnystupid]

wat a weak piece of shit

[balconio1172]

yeehaw!!

[cletustheloser]

yup only 230 whp. Video proves it. This dude is a moron to the Nth degree. Its no wonder he never wanted to dyno before. He knew his builds were garbage!!!

[tylerkb12]

Lol what do you expect from a guy named Cletus for fucks sake. Inbred ass motherfucker. No way I'm buying his kit. Water pump and belt in the FENDER??!? No fucking way.

[shiftyourmom]

wait just a minute. 6.2 liters and only 230whp? That isn't an engine it's a machine for turning large amounts of gasoline into exhaust. That's what you get for having a slack jawed yokel build your engine I guess. my bro's 2.0L Nissan puts down 225whp at 10psi and averages over 25 mpg.