REVIEW OF SCYTHE NINJA 3 CPU Cooler!

[quincygang]

i am using it on a overclocked intel i7 2600k overclocked to 4.3 ghz

idle temp = 35 C

full load = 60 C (max)

[yuurepoer]

why cant it stand just straight up ? :P

[captaincough]

Just installed mine. Did anyone notice a strong odor after first use.

[xCroatian]

Plz response, will this fit in CM 690 Advanced

[suckyplaze]

Will it be more powerfull cooler than the Mugen 2 Rev.B?

[daginfinity]

ＮＩＮＪＡ

[kakka626]

Would it be good in my Guardian 921 Case?

[kwfine]

the CPU cooler is just too large to put onto the motherboard.

[pavel831]

i just bought this cooler and it gives bad results. my last fan was a shitty stock fan that came with the cpu. before i cahnged the tems were 45 for each prosessor. after i cahnged it was 42. why did this good fan does so little effect?

[werkis2]

@pavel831 did u used new good thermal paste,i allways use good ones cost little but they give for me - 5 - 10 celsius of?

[pavel831]

@werkis2 to be onest i dont know. i used the paste that came with the fan. can you tell me names of good pastes?

[Holzkohlen666]

Does it work with a AM3+ Motherboard?

Oh and does it fit in the Cooler Master Scout Midi Tower?

[unstealthypanda]

@Holzkohlen666

It will work with the AM3 socket motherboards, as for the case though I am unsure

[Holzkohlen666]

5 Stars? I'm going to buy it.

[TheCrazyFinn]

I have this cooler inside my Tt v9 BE, and it fits barely, after I removed the side fan, with about 1 mm clearance. The funny thing is, the 23 mm top fan makes the casing shake sideways, while the Scythe fan makes the cooler wobble up and down. =)

Not by much though, it's barely visible, but if you look closely you can see the whole setup shaking.

[Doclolwut]

so many heat pipes... if only there was some more fin density!

[Doclolwut]

holy fuck, how long did it take you to make that intro in after effects? or whatever program you used... epic either way. Good work!

[BrianAppleton1]

im selling 1 of these brand new, check it out

htp://uk.ebid.net/perl/main.cg­i?words=1064642&mo=search&type­=user

[JeffVoon]

Is the paste they provide good? Or should I use the AC MX2 i have sitting around?

[L3G3nD0001]

Isn't that bad enough to place your motherboard on the carpet?

[acogscopepwn]

does it come with more clips for more fans?

[eurohim]

You should have tested it with the fan off.

[Nimerbushnaq]

3:04 LOL xDDD abjholute

[lcweng]

hi, will it fit into CM elite 430??

[HDGamingRoom]

Could you tell me if this fits in a NZXT M59?

[sbhk1]

which one is better? ninja 3 or mugen 2?

[olivierhacking]

does is require removing the motherboard to install?

[RSFOFOnator]

im scared it wont fit on a Gigabyte GA-890GPA-UD3H motherboard..

[Eirwan95]

is it safe to overclock my i5 750 to 4ghz on this cooler?

[ochibi131]

is this better than the coolermaster v8?

[Wesslig]

which cpu do you use, and which temps do you have??

[yosef019]

does it beter than mugen 2 withtwo fans???

[irkutsk2mailru]

Thanks :)

[DandyDuckie]

It looks nice..but it still ships with the shit Slip Stream fans..

[pachinko1972]

Will this fit on a CM Sniper case?

[XstreamPCReviews]

@pachinko1972 It should, it fit in my ThermalTake Element S

[vearheart42]

@XstreamPCReviews Really to be a reputable reviewer you need to show your ambients on any cooling review. Also you need to make sure you don't skew your evidence. Not saying you did but what I posted is pretty close to clear evidence of just that and it would make many people wonder the validity of your findings.

23c low is like 14-16c ambients on the absolute best coolers on the market.

14c is 57f and that is really chilly for a household temperature.

[CHUMOROCKS]

Really Cool!

[animatahr]

That heatsink is huge!

[wrjr74]

man thats a crazy ammount of heatpipes! that thing is huge to but it seems to work excellent!

[Merts478]

Have you done a review of the Noctua U12P-SE2 versus Corsair H50 or the Coolit one? And if you will in the future please, do a thermal comparison.

[XstreamPCReviews]

@Merts478 I have not, i will try and get my hands on those products, and i will do a thermal comparison. thanks for watching and remember to subscribe!!=)

[jaesungauzakim]

holy s**t, that lots of heatpipes, and its only $55

[XstreamPCReviews]

@jaesungauzakim I know!!!!

[FUzzyBUnnyBOoties]

Good job Elmer. I love mine they really are a beast of a cooler.

[XstreamPCReviews]

@FUzzyBUnnyBOoties It replaced my old CPU Cooler by Cooler Master lol! I think i can probably OC my CPU to 4Ghz now!

[Ch0c0late1337]

Gief :P - My case might be too small for it xD

[XstreamPCReviews]

@Ch0c0late1337 when you want great temps for your components, you need a nice big case=P , it is fine on my ThermalTake Element S.

[Ch0c0late1337]

@XstreamPCReviews I know, but I don't really have the money for it at the moment :)

[MrTRISTANCOOL]

@XstreamPCReviews is the cooler too big to fit in the 600t from corsair ?

[Holzkohlen666]

@XstreamPCReviews

so it fits in a midi tower?

Awesome.

[vearheart42]

What are you ambient temperatures? 

[XstreamPCReviews]

@vearheart42 It was 75 °F