G6R Key Features w/ Bob Long 1

[chasefilming]

can this run on a high pressure tank?

[php123]

@chasefilming yes, but it will cause your o-rings around the asa to need constant replacement and maybe some other side effects. a low pressure tank (a tank with slp reg being the best) is what everyone recommends. i don't own a g6r yet, but am looking into it

[codyman117]

nevr seen a rotor jam its funny bob make your hopper

[NXL269]

This man right here makes my favorite markers. The Intimidator is just omg.

[djr113]

Guppies haha, i dont think bob's had a haircut since i started playing when the movie "push" came out.

[PBlifestyleforever]

i love you rotor...ya know how it keeps jamming...whats the bore on your paint???

[teamlegacy92]

im thinking about buying this gun and i would like to know from another g6r owner if i need to use a low pressure tank on this gun or if my high pressure tank will work without damaging the gun... is a low pressure tank necessary or just recommended...

[DrLawlsome]

@teamlegacy92 i dont think you should use a high pressure tank. My buddy put one on his and the asa broke. I personally use a superlow pressure tank, but i think you could get awway with using a regular low pressure tank, just not a high pressure one

[dabombita]

@DrLawlsome you should only use low pressure tanks on the G6R, high pressure will cause you to blow an o-ring almost every time. Low pressure is what is required for it anyway.

[NSweeTx]

theres always varables

[yenrayNg]

should u use a low pressure tank for this gun?

[ipp21]

does the gun need a low pressure tank or can i use my high pressure tank

[djtropiklfred]

can we get the reg extender for the victory?

[brayanpaintball]

g6r the long bob that range is?

[aadrossart]

I have the same loader, and i'm going to get the same gun. YES!!!!!!

[MrMayonnaise999]

This efficiency test is crap. No one has gotten that many pods from the G6R. Cnoddings and Mike from TechPB have tested it. Bob Long had to have done something to fluke this test

[6iPWNi9]

@MrMayonnaise999 i am 100% sure Mike from techpb used a regular regulator, not that super low pressure reg. idk about cnoddings.

[vombaurs]

@MrMayonnaise999 bigger tank bro

[chasefilming]

i wana meet him

[onlygodknows7]

hopper cant keep up with this bad ass gun :)

[Sebastian44327]

lol rotor

[StinkyTurban]

what new bolt is he talking about?

[snapshootpaintball33]

bob long should make a hopper

[skatercom]

Bob your a badass and so are your guns ! keep up the good work !

[rippinonap1]

Like this if you think bob long should enter into the $500 mid range gun category with a new protege!!!

[TheNategamer]

now thats why you use a gravity fed hopper so your batteries dont die out in the middle of a game!!

[fightkills]

he looks so old ... does he even play paintball /

[MGOFadeToBlack]

Gettin a g6r in red but so hard to get

[brickofman]

so...this proves the rotor fails by jamming

[Fr0zenFiR3]

Just cuts him off... Haha.

Also, he needs to go back to grammar school. :P

[OrthoPanda]

in his vid w/ the 21 1/2 pods he was using a 68ci right cuz for some reason techpb only got about 12 1/2

[thriller108]

@OrthoPanda bob was using the slp tank which is a lot lower pressure than the high pressure tank mike was using

[OrthoPanda]

@thriller108 so is that stock on a tank or an aftermarket accessory

[thriller108]

@OrthoPanda its a different tank regulator but you can buy a ninja tank already equipped with the slp (super low pressure) from ninja paintball or just about anywhere. i wouldnt exacly call it an aftermarket upgrade

[SickAudi]

wow.. that's awesome.. bob long is on youtube

[paintballa981]

lol bob long is not the best with words

[forthecrossandjesus]

lol you know why he is doing the crasy shooting so nobody claims he edied it

[watsaroundthecorner]

@DYEforpaintball were you using a low

Pressure tank?

[SLbushwacker66]

ya know mr long, there IS an unjam fin on the bottom of the hopper. wait,...it doesnt work well. just keep hitting it lol

[P3rfectRunx24]

Haha I fucking hate rotors too.

[lykanie]

rotor jams!!!!!

[saxman8404]

the rotor needed new batteries. Just like any other damn hopper that needs batteries.

[Lonewalrus1]

what does everyone think I should get: g6r or ego11?

[djmarkian]

@Lonewalrus1 G6R, I think I will be getting the same lol...

[Lancer667owns]

@Lonewalrus1 g6rrrrrrrrrrrrrr

[Dyeforpaintball]

i just got my g6r and wen i went to shoot it i shot 2 paintballs then it started to leak out of the grip

[Akillahinatux]

@Dyeforpaintball probably a broken macroline just replace it or send it back and have them do it

[NNITRISS]

I had dm's,ego's and still my 05ed GZ Timmy shoots faster and consistent and I'm sold to get a G6R

[mikebra21]

what is recommended to run the lpr at?

[IamPBnJ]

@mikebra21 75

[CSSPR00]

shITYYYYYY AZZZZ ROTOR!!!! why didnt he use his own hopper ????? empire phrophecy>>>???

[airjordan777lt777]

@CSSPR00 just proving the fact that rotors blow ass

[Akillahinatux]

@airjordan777lt777 yes there so bad that when you go to the field almost every player has one

[Bunkermonkey777]

NXL+Prophecy=WIN

[Dyeforpaintball]

i was looking to buy 1 but every place that i look its out of stock and i was gonna get it for christmas so do u no where i could buy 1 from plz respond

thanks

[5T4Yx3DG3]

@Dyeforpaintball try ansgear.com its a great place with good prices. And if they don't have any I'm sure they'd order one for you.

[TimmyDizzle115]

he beat the shit out of that rotor lol. thats the exact reason i got rid of mine

[Neurosis1984]

ROTOR SUCKS!!! G6R BEST MARKER FOR THE MONEY ATM!!!

[harrisonsniper]

This is almost painful to watch him pull the trigger.......

[thepaintballer898]

whats up with that masssssssive Gauge?

[williammurderfacex3]

@thepaintballer898 so we can see it, so people dont call BS, again.

[thepaintballer898]

@williammurderfacex3 o thats a good idea!

[jcp2k]

@thepaintballer898 im sure its so you can actually see it in the video dumb dumb

[TOMMYxDIABLO]

@thepaintballer898 easier to read the pressure in the bottle.

[josh12345678]

haha look at the feed on it

[unspoken24]

guppy lmao epic fail brah

[williammurderfacex3]

@unspoken24 obviously you are new to the sport...

[unspoken24]

@williammurderfacex3 obviously your a total fag, u mad?

[Berceecil1]

"all the angles...are at angles"

[Berceecil1]

rotor fail

[PaintballinStL]

I noticed that Ninja Paintball made an SLP Tank especially made for the G6R. Since the marker runs at low pressure. I am going to wait until spring of 2011 to buy my own G6R. My friends G6R ran on 2nd run came with a .691 barrel which it should have been the .685, maybe he shouldnt of been in such a hurry to get one. Other than that its a nice marker and my friends shoots fine with the Rotor. Nice smooth shooting marker. Nice on air even on high pressure not so much on effecency.

[mxkx48]

i used to want a rotor before this video!

[loganinderrieden23]

hey bob pophecy and you wont have that problem

[dynamicpaintball]

wait does that mean u need a low pressure tank??? SOMEONE PLEASE ANSWER

[lunatiy]

@dynamicpaintball

it means that the gun is operating at lower pressure

[giovanii0423]

@dynamicpaintball No, its just a add on to get better efficiency.

[pballinpenguin11]

the rotor batteries r dying thats y hes smackin it like a hoe

[bbshooter1221]

@pballinpenguin11 ??? HES USING REBALLS...... not normal paint

[ShotsPB]

@bbshooter1221

r u rly that stupid? those rnt reballs, reballs are ALL yellow! THIS is half yellow half silver... its field paint, u tried to correct sum1 and u failed! what idiot would shoot reballs outside instead of paint?! its more money... so yea its paint not reballs... next time u try to correct urself actually know wat ur talking about b4 u make urself look like an idiot

[bbshooter1221]

@ShotsPB lrn hw too spll........ just kidding, :) Dont act like a dick over other peoples statement or guess. and basicially your the one making yourself looking like an idiot over other peoples Guesses and Thoughts on what was used in this video or whatever....

[ShotsPB]

@bbshooter1221

rly? its kinda txt talk cause i dont feel like typing everything out

[shymattt]

does he use zing to shoot with???

[willy2872]

I got a big question to ask, ive been watching all these Vids on the marker & they are saying it dose not have PSP 3shot on it ????? is this true or they dont know what they are doing ?????

[socomkid88]

@willy2872 yea i heard the same thing, but after doing some research, i found that the stock g6r board is a tadao odoshi. i found the online manual for the board, and it does say that it has psp ramp and psp 3 shot. along with many other modes. ill send you the link through a pm since it doesn't let you post links. hope i helped.

[snikrepak]

sounds like the ram is hitting the poppet to hard

[pballinpenguin11]

jam SMACK!! jam SMACK!! jam SMACK!! lol

[paintballz93]

i love how he gives the weight in actual pounds and ounces instead of a decimal like 1.92lb or something like that.

[choiboydaman517]

@paintballz93

you wouldn't say 1.5 minutes, you'd say 1 minute and 30 seconds.....

[paintballz93]

@choiboydaman517

I was referring to weight not time, but thanks

[Wordpbnation]

love the bear archery hat

[fafnir326]

geeze good thing this video isnt for the rotor

[Pbballer489]

Pballa me and my frend had the rotor with the new arm mine never james his almost every shot its luck of the draw with rotors he traded hi for a pinokio and it is in my opinion a better loder

[pballa321123]

Mr bob . You stole my heart! I'm getting one of these lol

[ihatetyler123]

rotor fail

[Barrowood0002]

oh TechPB will put it to the test Bob no doubts!

BLAST also is the best help in the industry hands down. Seriously the Tech helped me for hours one day trouble shooting a timmy in the shop!

[Barrowood0002]

wow I was tihnking about getting a rotor ill stick to my EmpireB, and Veloc

[krushinbonez60]

@Barrowood0002 rotors are the shit bro you need to upgrade on that

[CovertRipper12]

@Barrowood0002 rotors suck get a pinokio

[pballa321123]

@CovertRipper12 nooooooooooooooooooo dude. I may be a rotor boy . But with good reasen for being one . There insane! And they made a new part for them so that they NEVER!! Jam !

[CovertRipper12]

@pballa321123 i still like pinokio better

[Stj035]

@pballa321123 mines never jamed on my marq and its had 30 cases in it

[IamGrAGG]

@Barrowood0002 Rotors are perfect as long as you take care of them. I've had one since they first came out and I've never had any problems with it. Most of Bob's problems were probably the paint.

[PBballer23list]

@gvlaxbro yea

[jthouston44]

bob like bitch load

[Dyeballer610]

how much money u think bob has?

[shymattt]

whats his youtube acc url

[TheJulien44]

rotor fail

[TheMasterRanker]

rotor feeds up to 50+ bps my ass

[Revo900]

low batts guys relax.... they jam but not that much

[adambarrack]

maybe its just me but it looks like it has a fair amount of kick.

[geo1020]

O_O My reffing job doesnt pay enough :/ well time to drug deal!....Jk kids...maybe.

[possumslax20]

wow this looks so much more better than my marq 6 im deff by this

[sft3303]

unjam trigger there for a reason... hitting it doesn't do squat...

[PaintballKing99]

Yes his rotor did jam a lot but it's probably just the batteries, just think how much testing he's done on that g6r with that same rotor with the same batteries.

[RIPstevie817]

@PaintballKing99

Nah, rotors just suck

[JerAndTonic]

ive been a long time BL collector and BL fan and its customer service and they proof that they actually listen to their customers that will always have me as a customer!

[WoWbob396]

"there is always varabuls" lol

[jeepguinness]

Is this gun to be run on lp tanks like angles?

[YellowPanda5]

Think you need a new rotor man/

[MegaEdek1]

Bravo man! He wouldn't normally have to do this but with all the pesimistic comment's about the previous videos made him. Way to be a standup guy Bob

[FEPunleashed1]

LONG LIVE THE LONG BOLT

[ncontrolpaintballa]

ahhh whatttt.... you have to use a lp tank! thats lame....well good thing i have a ninja reg!!! hahaha does the rotor just not like that paint or what... psshhh of course the trigger will be bouncy! its a timmy!

[muderducker]

if you send me one i will do a test : )

[aznater7]

1.13 oz with or without batterie?

[MARthePaintballer]

wait?! did he say it needs lp?

[Heaton08]

@MARthePaintballer Same thing as the victory. Macroless design may leak if used with HP.

[MARthePaintballer]

@Heaton08 ty ty my friend uses hp n his victory is fine

[allnightwefighttv]

Looks good Bob... too much California sun by the looks of your skin. all in all, this gat looks like a monster, and you bet your ass I am going to buy one.

[wiiwouldntliketoplay]

@WooDsBaLLeR723

lol, fail.

[ezekiel2517lim]

you know you're old school when you call pods guppies

[forthecrossandjesus]

i love the shameless ansgear plug via the rotor stickers

[stclair304]

good old shake n shoot rotor lol

[Paintballplayer365]

bob, you should have gone with a prophecy loader

[MrMiniRage]

Does that gauge get in the way or is it one of those super low profile ones?

[qmto]

bink, bink!!!

great sound effects bob.

[msjgaels627]

at the end if your showing in the honest way then put it on psp 12.5 and do an ef test or stop 1 balling it during the test , stay steady rolling that trigger and put the camera were we can see you loading the pods, then people will respect you and the gun allot more

[ColtsFan926]

@msjgaels627 The way he is shooting is fine because it shows the actually complete efficiency so shut the hell up about that.

[AXPshaggy]

@msjgaels627 so u shoot 12.5 bps at ALL times when u r shooting? u dont sit there and 1 finger and shoot slowly at any point? he is doing a realistic efficency test.

[TITdirtONyourFACE]

@msjgaels627 do you shoot all your paint every game without stopping? no

at least i hope you dont

[StarmanSoup]

I can't wait to see some of the replacement bodys that come out for this. With the clamshell design making drop in bodys will be so easy. I want a 2k10 dragon g6r!

[xLuiSxPRx]

wow! how does a rotor jam so much!? ive never seen my rotor jam before with my dm9... anyways, its still a nice gun, i want to shoot it first. might be a good secondhand gun...

[bigschank]

well after seeing the rotor jam so much...idk...

[doktoroverdose]

Bob for president! ^^ Part 2 plox?

[OhNoesPB]

that's why i like my Pinokio ;)

[TronsVsJosey]

Why doesnt he just put it in NXL! Jeeze

[luismunoz10592]

@TronsVsJosey

The faster you shoot it the more air you lose, thats why he stops for no reason some times and shoots it slow. It makes it more efficient.

[Jstimach]

@TronsVsJosey g6r doesnt have nxl only psp, semi capped, and semi uncapped

[Ralampaga]

@TronsVsJosey Faster you shoot, the less efficient you are.

[nevekd128]

Well, we ALL know bob designs guns well that always work....When is he gonna do a damn loader? as we can see, a rotor fail in the vid

[stompnd]

FINALLY someone who's just as bad with their left hand as i am! =D

[paintballer7449]

"nobodys done it, i dont know why"

its because you havent done it so PE cant copy you yet!

[rajinmajin986]

need to ditch that POS rotor and get a prophecy

but for real this gun is sick

[Markdee117]

You need to get a Ninja Tank! Simply the best.... Hey can we see the rest of what Bob Long was talking about... 10 mins was up... post part 2 please... WHen Bob Long speaks the Paintball world listens!

[44121]

did he say this gun will need to take low pressure, meaning my high pressure tank is a no go?

[bkl91]

empire prophecy ftw rotors are always jamming 

[stallohas]

great vid bob!

so wout you recoment to call opp ray from ninja and get him to send me super low reg for this gun? 250-300psi from the tank reg?

cant wait onthil i get one in my hands

[sticktodrum]

Amazing, high end loader. Requires a whacking every pod or so. :)

[Markdee117]

Thats why I shoot a bob long marker! The G6R will be my next marker! Thanks Bob!

[jdlarson11]

we love you bob, you the man!

[jsnyara]

i think its time for bob to make his own hoppers..........love rotors but they jam too much.

[pvandpb]

I want now

[loganinderrieden23]

this is bull shit you cant one ball gota shoot the whole time

[StarmanSoup]

Dang you rotor!

What feed necks threads do they use? That one looks like it sits kinda high. I'd much perfer a marq style neck. Would have been nice to see that, I will prolly be selling a few markers to get one anyway, good job Bob I love it.

[opforguy]

@StarmanSoup Pretty sure it doesn't have a threaded feedneck, I believe it uses the Ego style clamp kind

[RIPstevie817]

@StarmanSoup It doesn't have threads and it would be impossible to install a marq style because those are milled into the body. This is the same feedneck thats on the victory.

[tdwp3]

<3 Bob, haha. Proving everyone wrong that he used a 68.

[bobbythemedic]

im showing you in the honest waaa-.... thanks champ. haha it looks like such a nice gun. i want it so badly.

[alexmoyal]

will thoes new grips fit on a rapper or a gen 1 marq?

[bonhamboy1993]

then I jizzed in my pants

[PinkL4dy82]

he was about to go on a rant it seemed at the end before they stopped the video haha

[msonic28]

Thanks Bob! now change those rotor batteries.. -.-

[Alpinetraxxx]

I WANT IT SOOOO BAD