I just got an Ibanez RG350DX and I think it uses the Tremolo system as well.
When I tune my guitar and it goes out of tune, I tighten the screws on the place where I strum right? What happens if they're tightened all the way and the guitar untunes itself?
@ShadyStories Ah! I got a RG170DX just to avoid having to deal with a Floyd Rose. Sadly, though, now I wanted a piezo on my bridge and I can only find it in a Floyd Rose bridge. I did not purchase it YET so im not really an authority on tuning them but it sounds like you should wind the fine tune down, turn the rough tuners up, and THEN finetune it when they arent tightened all the way but somewhat in the middle. Again, this is only from observing Floyd Roses and im sure someone can answer beter
@soullessSiIence 1st - restringing the guitar with floyd is very easy it only takes time - 2nd - why dont us try to use guitars with a better floyd than your cheap one and then ask yourself about detuning it - better try the floys of an ibanez and then ill take your opinion (no offence) :)) happy searching :D
Just a question! Will installing gotoh locking tuners help a guitar with a licensed Floyd rose from getting out of tune? Cus the locking nut isn't doing any justice!
man you are idiot no need to remove the lock at the top of the guitar you can put the string down of that so easy!!just loosen it a bit!Sorry for my bad english
If you want a great metal guitar get a shecter Hellraise ^^. IMO Shecter makes the best metal guitars. Of course there is dean, Ibanez, esp. But I love shecters!!! You can never go wrong with Shecter :).
weelll. i played a schecter she-devil on a vox 150 watt tube amp at gc, and it was worse than my b.c. rich avenged son of beast. and i don't really like the sound of most schecters mainly cuz they sound too modern for me i'm lookin for that old school thrash sound, and that means b.c rich, esp, and jackson.
@JessyDevilVendetta I got a hellraiser deluxe and I want to get a C-1 Hellraiser so bad. I got a les paul gibson instead... Hellraiser C-1 FR is my next guitar!
I need some help actually, i just changed the strings on my floyd rose and the tremolo is even and everything but the high e string has a nice little buzz sound to it, and it doesnt seem to be hitting anything when i strum. Can someone gimme a clue?
have u got a slightly loose peg or fret because the same thing happened to my guitar and it was just a loose peg so i just tightened it up and it went
I got a Dean Dime O Flame ML with a floyd rose. Is it just to Spin the Tuning Lock and then tune the strings and put the lock back in or should i go to a pro?
god your explaining this terribly not to mention your way of doing this all wrong, and when you put in the sting on the headstock your not using any way of locking the string in??? WtFuck? and i dont mean the locking nut, the way he strings it is wrong
dude ive been tying to tune my guitar for like 2 hours and everytime i tighten one string the others keep losing the tune, its so fucking annoying, anyone have any suggestions
Im shure that you have a tuner so my advice is to STRETCH your new strings!!
After you put them all on just go wild and stretch the shit out of them. Do some really wild bends,then actually pick up the string with your right hand and pull it all diferrent ways. Now after this is done to all strings RETUNE!! The key is retune. Then stretch them again just like I said. Then retune again. After about 3 or 4 times your guitar will actually stay in tune with out even locking the nut. Check my vids.
you need to adjust the tension screws in the back cavity of the guitar...you might be using gauge strings that wasn't originally set up for your guitar
thats the same with me what i do is i just lossen the spring (this takes a while to get it done good) until i can have my guitar in tune without haveing a wierd tension on the brige
make sure the locking nut is actually locked down tight. the same thing happened to me. but seeing as you did this 6 months ago you probably figured it out.
you shouldn't just string up the guitar and then use the fine tuner. You need to tune it the normal way dozens of times to get the strings loosened and then fine tune the shit.
when the bridge is flush with the body and its all tuned up and ready to play, can you just unskrew the locking nuts on the neck and for example tune to drop b and then just tighten the locking nuts and your done????
the washburns floyds are junk. if ya want a real floyd then get a kramer striker. the only issue with those is its more difficult to re-string it. and you have to loosen the trem locks in order to tune the guitar.
if floyd rose are gay..why does the guitar legends use them like eddie van halen, randy rhodes, kirk hammett, michael batio, satriani,steve vai,etc..respect!
SOMEONE HELP my high e 9 gauge keeps breaking on my edge pro like i dont know if im tightening the string stoppers too tight or something like the little pressure pads on the bridge cause wen i tighten them it breaks how tight are they supposed to be?
i have a jackson, in standard tuning, and i was wondering how in the hell to tune it down to c# standard or drop c# without all the fret buzz and making the bridge sink.
I always have trouble screwing the screws back on i hate the L Wrench screws they always mess up and i gotta keep buying new ones because i tried to tight them then the hexagon shape for the allen wrench messes up and i gotta keep buying new ones, any advice?
I have a Jackson with a Floyd Rose with 10 gauge strings on it that tends to go out of tune more frequently than with 9 gauge strings. I'm running out of room on my fine tuning section of the guitar and was wondering if is it possible to unlock the guitar, retune it from the top, readjust the fine tuning to allow for more room and relock it without breaking the strings or doing any damage to the guitar?
well yea thats how u tune a floyd. loosen the nuts, unscrew your fine tuners a bit so u have more space to tighten them if ur strings go flat. then (with ur nut loosened) tune the strings with the tuning pegs. finally, tighten ur nuts (lol) back and fine tune your baby. dive bomb away!
He looks like Cobain.
Rhukza 3 weeks ago
3 or 4 inches is not enough if you dont want slippage
go about 6 inches
mycahman 2 months ago
is it so simple :D!!
humantorch1993 6 months ago
some say this man is jesus. jesus cured a blind man, i think he can handle astygmatism
WiiGamerof1995 6 months ago
Can you guys please help me?
I just got an Ibanez RG350DX and I think it uses the Tremolo system as well.
When I tune my guitar and it goes out of tune, I tighten the screws on the place where I strum right? What happens if they're tightened all the way and the guitar untunes itself?
Do I start this process over again or what?
Help please ~ Thanks
ShadyStories 7 months ago in playlist (1u) Tremolo
@ShadyStories Ah! I got a RG170DX just to avoid having to deal with a Floyd Rose. Sadly, though, now I wanted a piezo on my bridge and I can only find it in a Floyd Rose bridge. I did not purchase it YET so im not really an authority on tuning them but it sounds like you should wind the fine tune down, turn the rough tuners up, and THEN finetune it when they arent tightened all the way but somewhat in the middle. Again, this is only from observing Floyd Roses and im sure someone can answer beter
Radiscool1 7 months ago
whered you get that Charvel?
Apollion10 7 months ago
What if I wanna tune the guitar a step down? Should I screw on those to keep the whammy vertical?
Archferumphis 9 months ago
this video its good , jesus teaches how to doit! thanks jesus
alexposi 1 year ago
Thanks I use a robotic tuner so I don't need the fine tuners
mrmoney185 1 year ago
actully you should avoid using the fine turners as much as you can best to unlock and tune up that way for any tuneing that isnt small
Zanith50 1 year ago
Holy shit!!!!!! It's JESUS!!!!!!!!!!!
1godlessmonkey 1 year ago
Why did I buy a guitar with floyd?? Restringing is worst than hell. The floyd didn't even work because it detunes the freaking guitar.
soullessSiIence 1 year ago
@soullessSiIence 1st - restringing the guitar with floyd is very easy it only takes time - 2nd - why dont us try to use guitars with a better floyd than your cheap one and then ask yourself about detuning it - better try the floys of an ibanez and then ill take your opinion (no offence) :)) happy searching :D
messalion 1 year ago
i wanna grow a beard like u
HellsHighwayTrooper 1 year ago
Great vid brah...just got me a floyd...its badass!
dreamforfreedom 1 year ago
Just a question! Will installing gotoh locking tuners help a guitar with a licensed Floyd rose from getting out of tune? Cus the locking nut isn't doing any justice!
freddy911304 1 year ago
nice video. Itzs like a fusion between jesus crist, kurt cobain and john lennnon.
EuskoMetal 1 year ago
man you are idiot no need to remove the lock at the top of the guitar you can put the string down of that so easy!!just loosen it a bit!Sorry for my bad english
Airnickgr 1 year ago
Awesome guitar!!! dont ya sell it?
faustoj26a 1 year ago
Kurt Cobain meets John Lennon?
h3nRiQu3J 1 year ago 3
If you want a great metal guitar get a shecter Hellraise ^^. IMO Shecter makes the best metal guitars. Of course there is dean, Ibanez, esp. But I love shecters!!! You can never go wrong with Shecter :).
Ziece4 1 year ago
weelll. i played a schecter she-devil on a vox 150 watt tube amp at gc, and it was worse than my b.c. rich avenged son of beast. and i don't really like the sound of most schecters mainly cuz they sound too modern for me i'm lookin for that old school thrash sound, and that means b.c rich, esp, and jackson.
Metayerthraxadeth 1 year ago
Yeah I can see where the Modern thing comes in. I honestly HATE B.C rich. idk why I just do.
Ziece4 1 year ago
@Ziece4 So true bro C-1 fr & V-1 fr, Hellraiser with seymour duncan SH-8 Invader in the brige and 59 in the neck. METAL!!!! \m/
JessyDevilVendetta 1 year ago
@JessyDevilVendetta I got a hellraiser deluxe and I want to get a C-1 Hellraiser so bad. I got a les paul gibson instead... Hellraiser C-1 FR is my next guitar!
Ziece4 1 year ago
good advice.
LifeOnStandby239 1 year ago
thats a nice Charvel. I have one similar to it. mines a 275DLX. but I'm loving the reverse headstock on that one.
TheZombieRitual 2 years ago
This has been flagged as spam show
This guy sounds funny from 1:28 - 1:31
Mourmaline 2 years ago
Comment removed
Mourmaline 2 years ago
this is stupid.
InFuriatedShadows 2 years ago
okAY im thinking of buying a les paul
now i cant make up my mind to get a les paul with the regular tremolo or a floyd rose tremolo.. which would somebody prefer?
Metallicaforever95 2 years ago
floyd unless you want your gutiar to go out of tune really fast
ShadowOfDeth1 2 years ago
@Metallicaforever95
dont ever put a tremolo or floyd on a les paul
CiviC092 1 year ago
Kurt Cobain!?!?!?! z0mg!!!
GRAFHC 2 years ago 3
this guy suxx!!!
rama6maiden 2 years ago 14
nah i think he's ok
superbolli 2 years ago
@rama6maiden you'll burn in hell!!!
freiture 1 year ago 6
I need some help actually, i just changed the strings on my floyd rose and the tremolo is even and everything but the high e string has a nice little buzz sound to it, and it doesnt seem to be hitting anything when i strum. Can someone gimme a clue?
nuttywhitekid 2 years ago
have u got a slightly loose peg or fret because the same thing happened to my guitar and it was just a loose peg so i just tightened it up and it went
14KFB14 2 years ago
you need to raise the action on your guitar
LBCSAINT13 2 years ago
thx Jesus! U helped a lot! :D
ozsat1990 2 years ago
jesus plays guitar
slantedwasp 2 years ago
jesus rocks!!!
tnelovelam 2 years ago
John Lennon lives!!
TheLastSinger 2 years ago
Thank you Jesus
<[=D
MetaLMunchies 2 years ago
I got a Dean Dime O Flame ML with a floyd rose. Is it just to Spin the Tuning Lock and then tune the strings and put the lock back in or should i go to a pro?
oze9901 2 years ago
Comment removed
oze9901 2 years ago
thank you jesus for helping me change strings on my floyd :D
RyeToDaEyE 2 years ago 51
@RyeToDaEyE Jesus has glasses?
XboxDem0 1 year ago
god your explaining this terribly not to mention your way of doing this all wrong, and when you put in the sting on the headstock your not using any way of locking the string in??? WtFuck? and i dont mean the locking nut, the way he strings it is wrong
Wrathofa7x 2 years ago
It's locked in already.
karlb1 2 years ago
Not to helpful!!!The bridge keep going to low...There a lot more then that at tuning a locking system
airock666 2 years ago 2
dude ive been tying to tune my guitar for like 2 hours and everytime i tighten one string the others keep losing the tune, its so fucking annoying, anyone have any suggestions
mangina0mmm 2 years ago 2
your guitar is either untuneble or you don't know how to tune i recommend buying an electric tuner :P
or get an iphone app for it :P
0xNecrox0 2 years ago
i know how to tune a regular guitar but with a floyd rose system installed it makes it very hard because all tensions of the strings have to be equal
mangina0mmm 2 years ago
Ok... im not to sure if this is the proper way to do it but i read somwhere that if you tune in the following way it goes into tune quicker...
6th String
1st String
2nd String
5th String
Keep doing that until all of them are in tune and not going out of tune.
Then do the fourth and fifth strings
just keep repeating that.
dunno if it will help but its what i do.
oh and yeah use an electronic tuner.
JimiB1993 2 years ago
Im shure that you have a tuner so my advice is to STRETCH your new strings!!
After you put them all on just go wild and stretch the shit out of them. Do some really wild bends,then actually pick up the string with your right hand and pull it all diferrent ways. Now after this is done to all strings RETUNE!! The key is retune. Then stretch them again just like I said. Then retune again. After about 3 or 4 times your guitar will actually stay in tune with out even locking the nut. Check my vids.
brib333 2 years ago
you need to adjust the tension screws in the back cavity of the guitar...you might be using gauge strings that wasn't originally set up for your guitar
TheGuitarTheory 2 years ago
thats the same with me what i do is i just lossen the spring (this takes a while to get it done good) until i can have my guitar in tune without haveing a wierd tension on the brige
urdumb7 2 years ago
You gotta keep adjusting the strings and the springs until they tune fairly easly, there are plenty of videos on ehre abotu it.
karlb1 2 years ago
make sure the locking nut is actually locked down tight. the same thing happened to me. but seeing as you did this 6 months ago you probably figured it out.
Metayerthraxadeth 2 years ago
you shouldn't just string up the guitar and then use the fine tuner. You need to tune it the normal way dozens of times to get the strings loosened and then fine tune the shit.
pppoooppp 2 years ago
he looks like a older version of kurt cobain lol
crayzsk8er39 2 years ago
thats a hell of an insult you just gave the man.
pppoooppp 2 years ago
hey i just bought a music man axis how shood i tune it please reply
lilrocker888 2 years ago
im saving up for a epiphone em2 fx is the floyd good on that guitar
fenderstratplayer14 2 years ago
it has the original floyd rose, its the best kind of floyd rose, it will keep tune perfectly. that guitar is a GREAT choice
Luisrox123 2 years ago
when the bridge is flush with the body and its all tuned up and ready to play, can you just unskrew the locking nuts on the neck and for example tune to drop b and then just tighten the locking nuts and your done????
wrathchild356 2 years ago
the washburns floyds are junk. if ya want a real floyd then get a kramer striker. the only issue with those is its more difficult to re-string it. and you have to loosen the trem locks in order to tune the guitar.
nmrphy51 2 years ago
are Washburn's floyd a good trem?? please reply.. anyone
althegreat17 2 years ago
not good than ibanez tremolo bro
bossbing 2 years ago
ah ok.. in what aspect?? as what i've observed they have the same price range.. depending on each models
althegreat17 2 years ago
if floyd rose are gay..why does the guitar legends use them like eddie van halen, randy rhodes, kirk hammett, michael batio, satriani,steve vai,etc..respect!
kevinbatao 2 years ago
yo i heard Ibanez guitars have the best floyd rose!!
ima get one, i got tired of Epiphone.
DMR236 2 years ago
ibanez doesnt use floyd rose. they use edge III. theyre not bad. i recommend esp over ibanez tho. they use REAL floyd roses.
lobster272 2 years ago
yes dey do...espacially their RG series....
but yea esp's are preety ckool, considerin Kirk Hammet uses them!!
DMR236 2 years ago
is dat a chep imatation of a Jackson?
DMR236 2 years ago
kinda but charvel is their own type of guitar(i think), but they suck universe balls compared to a real Jackson!
musicaddict333 2 years ago
hahahahahaha
dude
grover jackson bought charvel
randy rhoads came to jackson wanting a guitar
grover made it with his ideas
ther for he thought it should have his name on it
ngshredtolive 2 years ago
SOMEONE HELP my high e 9 gauge keeps breaking on my edge pro like i dont know if im tightening the string stoppers too tight or something like the little pressure pads on the bridge cause wen i tighten them it breaks how tight are they supposed to be?
blurpy123 2 years ago
is it a licensed floyd or an original floyd? cuz that makes a huge difference
Ryche9 2 years ago
its an original floyd
xRatedRSuperstarx69 2 years ago
huh. well you might have just gotten a dud then. all original floyds ive used that were set up correctly stayed in tune amazingly
Ryche9 2 years ago
Comment removed
spencerblakeu12 2 years ago
Comment removed
spencerblakeu12 2 years ago
then you have a shit trem system lol
vbdude006 2 years ago
i have a jackson, in standard tuning, and i was wondering how in the hell to tune it down to c# standard or drop c# without all the fret buzz and making the bridge sink.
razorguitar777 3 years ago
thicker strings or removing springs on the back
WannabHammett 3 years ago
I always have trouble screwing the screws back on i hate the L Wrench screws they always mess up and i gotta keep buying new ones because i tried to tight them then the hexagon shape for the allen wrench messes up and i gotta keep buying new ones, any advice?
blkdaliamurder9000 3 years ago
Should I loosen the fine tuning section a bit before loosening the nuts at the top part of the neck to relieve some tension on the strings?
Powertabs75 3 years ago
I have a Jackson with a Floyd Rose with 10 gauge strings on it that tends to go out of tune more frequently than with 9 gauge strings. I'm running out of room on my fine tuning section of the guitar and was wondering if is it possible to unlock the guitar, retune it from the top, readjust the fine tuning to allow for more room and relock it without breaking the strings or doing any damage to the guitar?
Thanks for any suggestions
Rustinpeaces 3 years ago
well yea thats how u tune a floyd. loosen the nuts, unscrew your fine tuners a bit so u have more space to tighten them if ur strings go flat. then (with ur nut loosened) tune the strings with the tuning pegs. finally, tighten ur nuts (lol) back and fine tune your baby. dive bomb away!
slugnojutsu 3 years ago
omg it's a hippeh!!!
ferociouspokemachine 3 years ago
a hippy wouldn't have a floyd, he'd have a strat or gibson haha
supershiva11 3 years ago
just keep it a strat... gibson are for rockers :D
ferociouspokemachine 3 years ago
Charvel bitches!!!
viletantrum 3 years ago
quick qu. when u put ur whamy bar in does it fall out super easy? mine just slips in the whole
allskillage 3 years ago
basically you ought to have a nut over your bar, keeping it in place. And next to that, there's a click sound when you insert the bar.
morthyr 3 years ago
just got the synyster standard this helped a butt load thanks
A7XAnthonyA7X 3 years ago
im ordering a jackson king v.
DeathThePhilosopher 3 years ago
yo cheech, i found chong!!! lmao.
nahh, this vid's very helpful, thanks mann
skaterboiy 3 years ago 4
Just got a IBANEZ RG350EX and found this vid really useful, cheers man ^^
B5nthesheep 3 years ago 9
i got the370dx
muzglimy 3 years ago
i got the Ibanez RG 5ex1 4 days ago
butane1245 3 years ago
did you find the "balance"
i can't on mine and I'M GOING CRAZY!!!!!
me128166 3 years ago
yea. make sure the floyd is flush and settled with the body. Not going too far into the body, but not too far out. =]
butane1245 3 years ago
well same here.. il get new strings soon... but then i can hopefully tune it..
KapaH8sU 3 years ago