My V-8 S-10

[HardinValleyMagic]

@Mr37NINE Thanks

[MrRumpld4skin]

Digital gauge would have made it perfect...

[buttmanroad]

I like it. Ive got an s15 with a 2.8 wana race ? Kidding

[vfIskullangel]

I'm no fan of S-10's but this one is very eye catching. I love the lightning instead of the flames.

[HardinValleyMagic]

@vfIskullangel Thanks!

[td7172]

One of the nicer paint jobs I've seen. Congrats!

[HardinValleyMagic]

@td7172 Thanks!!

[kdickenson456]

verrrry cool. are those thrush welded mufflers? and what kind of cam?

[HardinValleyMagic]

@kdickenson456 no they are 2 chamber flows. the cam couldnt tell you. that ws the old motor set up. just know whats in it now.

[aless12dk]

nice paint!!

[Shemassault]

My God, this is the definition of class right here. I like the clean look, I'd lose the lightning bolts though, but it's just my personal preference.

[HardinValleyMagic]

@Shemassault Thanks abunch. Nope not loosing the Lightning. Thats what seperates it from every other black S-10 out there..

[nlvfd8718]

very nice



[HardinValleyMagic]

@nlvfd8718 Thanks!!

[tjh1127]

man i am lovin that front end.

[HardinValleyMagic]

@tjh1127 Thanks!!

[mattsug911]

I absolutely love your truck man! I actually want to do some similar things to mine as well, i have a 1987 GMC s15 any tips on where i should start with fixin it up? how much did the paint job cost? mines a little rusty on the edges and an ugly green and tan, but i love that glossy black you got goin.

[HardinValleyMagic]

@mattsug911 Thanks! Well the paint was done before I got it. I was lucky for that. So all had to do was the details and polishing. Like all the work I have done under the hood. Now it is much stronger and alot more detailed. Guess you need to figure what is most imporyant to you. Running good or looking good. Both cost, so its up to your budget too.

[2004dodgeram13]

thank you, please let me know!

[HardinValleyMagic]

@2004dodgeram13 sorry about the delay been a lil busy. Ok out of the harness on the driverside pack of wires I am using 4 wires. The purple wire is to the starter. The Red is to the alt. The pink and black is to the alt. The Pink wire goes to the HEI. Also with mine I had to run a red wire to the alt. from the battery.

Hope that gets you going in the right direction. Or check out v8s10.com on wiring or s10racer.com

[2004dodgeram13]

hi again, i was wonderng what wiring harness did you use?

[HardinValleyMagic]

@2004dodgeram13 I used the wires from the block on the driverside. Will have to look and see what color they were but there were only like 3 or plus all the wires for headlights and stuff. Computer is completely gone. Will check and get back with you.

[aneckred]

Fucking SweeT!!!!!!

[HardinValleyMagic]

@aneckred gets better everyday! Thanks!

[USMC1stpltBco]

nice man she's really clean i like the centerlines and bucket seats what size cam you have in her?

[HardinValleyMagic]

@USMC1stpltBco Well that set up I am un sure what it was. Check out my more current videos. I know all about it.

Enjoy.

[2004dodgeram13]

so where should i get my brackets out of to fit my truck??

[HardinValleyMagic]

@2004dodgeram13 I am not a 100% certain but a blazer might be real close. I would start there or find an extended cab and see it the floors are real close. U might have to alter it just a little. Not really sure. If I get a chance to go to local pul a part I will look and see what I can find out.

[2004dodgeram13]

@HardinValleyMagic thank you very much, please keep me in touch.

[2004dodgeram13]

didnt your truck come with a bench seat tho??

[HardinValleyMagic]

@2004dodgeram13 I am sure it did. Just a few came with buckets then. Mainly extra cab trucks.

[2004dodgeram13]

what seats? brackets?

[HardinValleyMagic]

@2004dodgeram13 They are late 70s camaro. Using stock sliders for bucket in a S10.

[2004dodgeram13]

@2004dodgeram13 didnt your truck have a bench??

[camarojake70]

what exhaust do you have on it...where did u get those awesome taillights. i want to get those for mine. but they will not be as cool till i put a 350 in mine. i know you shouldn't worry about mpg with a 350 but what do u get.

[HardinValleyMagic]

@camarojake70 It has shorty headers 2 1/2" exhaust run through 2 chamber flows. As for the tail lights they were there when i got it. At the time of that video I was getting 8-10 mpg

[racer4242]

were did you get the back cover to make it flush back there

[HardinValleyMagic]

@racer4242 it actually was one that had clamp on side rails and snapped to it. the new one is a fiberglass lid it to is over the rail.

[BassRacerx]

SICK! 

[HardinValleyMagic]

@BassRacerx Thanks! Glad you like it! I know I do!

[tboner793]

where did u get front grille????

[HardinValleyMagic]

@tboner793 it is a billit alum. replacement. can be found at lmc.com

[chewyyy420]

your truck is fucking sickkkkk man!!!!

[HardinValleyMagic]

@chewyyy420 Thanks!!

[irishkendoll]

i remember this from couple years ago, never gets old looking at the black paint!!! looks right. have a look at mine some time! hope you still have and enjoying it!

[HardinValleyMagic]

@irishkendoll Thanks a lot! I do try and keep it polished and super clean!

[roycearandolph]

slick truck man

[HardinValleyMagic]

@roycearandolph Thanks!

[HardinValleyMagic]

@CRF80TOP55 Thanks the rear ones have carbon fiber inside and the fronts are  brite whites high intensity

[hga101]

love the truck dont like the wheels that much

[HardinValleyMagic]

Thanks. Those wheels are long gone.

[hga101]

Yea im getting my 1991 s10 with all new interior and guages and its got a 350 in it im so siked because its my first truck because im 15 and will be 16 soon!!!!!! ill post you a vid showing my truck soon!

[tobasai068]

o my god im in love i cant even find a word good enough.

[HardinValleyMagic]

Thanks!!

[robert30319]

awesome truck i love the paint job and where are those tail lights sold?

[HardinValleyMagic]

Thanks! The lights were on it. I think you can find them online somewhere.

[marshcase]

you should open headers

[DeadToFall92]

damn...better than my POS :((( wanna trade? haha (joke)

[Metaliica474921]

Beautiful truck you got there buddy

[HardinValleyMagic]

Thanks!!

[watssup311]

That is one sharp looking s10, hopefully mine will start peice together, need to finish off the body work and paint it, is that a durango?

[HardinValleyMagic]

Thanks!! It was a Tahoe series.

[joesmxracing]

do you have fender well headers or headers that go around the steering shaft? where did you get them?

[HardinValleyMagic]

They are the shorties that go around the steering shaft. They are made by Sanderson.

[HardinValleyMagic]

It is a fiberglass rollpan.

[darkflame64]

where did u get your rear bumper?

[er23224]

super nice 5*, what size wheels and tires, what about the drop?

[HardinValleyMagic]

It has 20x9 rims running 245 35 tires. The front is 2" drop spindles and 2 1/4" cut from the stock springs. The rear has 3" blocks and the overload leaf moved to the top of the spring pack and rebolted together.

[cranesgonewild]

What a beautiful truck. My first vehicle was an '85 S 10. And now I want another one.  And I want it to sound like this. What kind of transmission do you have in this?

[HardinValleyMagic]

It is a 600 Edelbrock with electric choke.

[tommiez92]

what kinda carbs u running

[gstech88]

What kind of tonneau cover do you have?  It looks really nice on your truck.

[HardinValleyMagic]

It is a snap on dp brand. Was on the truck when I got it.

[07gmclover]

small block?

[HardinValleyMagic]

Yes. 350 '72 model.

[HardinValleyMagic]

It was in it when I got it. But they are not too hard if one is mechanically motivated.

[allampedup88]

hey, was that hard to put the motor in???

[HardinValleyMagic]

The other wheels were not very stable when corning. As for headers, I never run it with out them!

[1FAST91SONOMA]

Hey man... Nice S. Why did yiu replace those wheels though? I like them a little better. Do you run your S w/o headers??? Is it safe to do that, even in winter?

[wsmikey]

yea man that is of the best lookin s10's i have seen nice paint,wheels and sounds good...

[HardinValleyMagic]

Thanks!

[HardinValleyMagic]

Thanks! New window tint and engine videos to come!

[donof]

one of the best ive seen

[HardinValleyMagic]

Thanks for the compliments.. I got it this way. It had been home for about 2 days. I'll get some more video after I make it a little more me..

[killerbe1]

she sounds grumpy, good work

[HardinValleyMagic]

Thanks! LOL!! Not as bad as one would think. About 10-11 m.p.g.

[soljajato]

Nice truck. Sounds powerful. But i guess its a gas guzzler.