Dana axles are not made by GM, Dana axles are made by Spicer. Spicer is Dana and Dana is Spicer basically. the 14 bolt, the 12 bolt, and the 10 bolt are axles that are made by GM.
@GasganoFJ60 dana is not made by gm dude !!! dana makes axles for gm,dodge and ford breaking an axle in a pull copetition is not unusal!!! when u have lots of weight and big power things sometinmes go boom
check inside a dodge axle for yourself. Dodge axles are know for smaller u-joints, axle shafts, and fewer splines than Ford or Chevy. For example, all three used dana 60 front axles at some point, but the dodge versions had smaller internals than the other two. why? I dont know. Old dodge trucks were heavy with weak axle internals. I have bee inside Ford, Chevy, and Dodge dana 60F axles and more often than not that is the case.
nice manly powerful truck, sounds like he sheered off a spring pin, and kept goin like nothing ever happened, plus drove away with the same kind of attitude, dodge is tough
The truck looks awesome! First Gen Dodges are the best trucks ever made! And the wheels are Alcoa's! I am looking for a set for my 92 W350 incase the owner ever wants to sell please let me know, along with the Ranch Hand front bumper! I have never seen a motor that can take just about anything we can do to it and still run for ever! Again, awesome truck!!!
Dodge/Cummins is the KING in the light truck performance circles. General Mistake & ferd's V-8's 'wanna be' diesels can't hold a candle to the inline-6.
when that truck came out chevy still had the shitiest engine ever made 6.2 shit and ford had something a bit better but still crap compared to CUMMINS
Hm, nice truck no doubt. Just needs to be maintained better so none of that shit happens again. I didn't think the turbo sounded all that great unlike a few of you that have left comments.
I spoke to the guy after his pulls, he was running an open intake and his belt broke and a piece got sucked up inside the turbo. That noise isnt a good noise. His turbo is borderline fucked. Whats funny though is that the guy thought it sounded awesome........ :-/
nice truck it looks nice i am going to get between a 98 and 03 cummins and put a big boost in it so i can use it to pull
bluerollers 5 months ago
This is a baaaad aaaasss truck tho...
Cantrell2500HD 6 months ago in playlist diesels
how much was that lift
318dodgeN350camaro 8 months ago
Dana axles are not made by GM, Dana axles are made by Spicer. Spicer is Dana and Dana is Spicer basically. the 14 bolt, the 12 bolt, and the 10 bolt are axles that are made by GM.
mopargssr 8 months ago
When they start bouncing, it's all over.
takemeback2 8 months ago
THATS A NICE LOOKING TRUCK.
SuperRobbie1976 9 months ago
axles in newer trucks are made by AMA and are used in GM and Dodge trucks. not relevent to the dana axles but thought it was worth mentioning.
thequietrebel420 11 months ago
his turbo was SCREAMIN
bk32591 1 year ago
can i get a hell yea on that turbo?????
rebal442 1 year ago
1st gen huh...
brandonesterer 1 year ago
gatta love the 1st gens
mrmoparlover 2 years ago
ouch it made it pretty far
larrabeerr 2 years ago
This comment has received too many negative votes show
Chevy would be broke in the first two seconds lol
treysgangster1234567 2 years ago
This comment has received too many negative votes show
That is just like a Dodge.
MercuryMorrison1 2 years ago
Comment removed
corey0621 2 years ago
Keep in mind its a DANA axle....they are made by GM.
GasganoFJ60 2 years ago 2
That truck has a dana 80 axle. plenty strong. just goes to show how much power is getting put down to the ground. and Dana spicer isnt made by GM
SeckSeySam 2 years ago 9
@SeckSeySam u sure its an 80? cuz my ist gen runs a dana 70
azteamr0per 1 year ago
@azteamr0per I made that comment before I bought my first 1st gen. as I know now it has a dana 70hd rear. still plenty strong
SeckSeySam 1 year ago
@SeckSeySam lol ive been through 5 off them now my 92 dynoed at 235hp/600 lbs tq
azteamr0per 1 year ago
@azteamr0per 1st gen's are actually a hybrid between a 70 and 80.
NVMDSTEvil 1 year ago
@GasganoFJ60 dana is not made by gm its made by spicer gm uses dana axles as do most manufactures
bulldog32220 1 year ago
@GasganoFJ60 Dana axles aren't made by Dana...they are made by Dana
1olivebranch 1 year ago
@GasganoFJ60 your an idiot.....
chevy490 1 year ago
@chevy490 If you're going to call people idiots, you should at least learn to spell.
7188181 1 year ago
@7188181 ok i wills.
chevy490 1 year ago
@GasganoFJ60 Dana is not made by GM.
NVMDSTEvil 1 year ago
@GasganoFJ60 Dana axles aren't made by GM, AAM axles are.
Broadcastbuddy2 11 months ago
@GasganoFJ60 dana is not made by gm dude !!! dana makes axles for gm,dodge and ford breaking an axle in a pull copetition is not unusal!!! when u have lots of weight and big power things sometinmes go boom
bulldog32220 8 months ago
Thats a pretty loud turbo whistle! I'd like to see a newer vehicle or a ricer drive away from a situation causing serious breakage.
ImLivinLaughinLovin 2 years ago 4
check inside a dodge axle for yourself. Dodge axles are know for smaller u-joints, axle shafts, and fewer splines than Ford or Chevy. For example, all three used dana 60 front axles at some point, but the dodge versions had smaller internals than the other two. why? I dont know. Old dodge trucks were heavy with weak axle internals. I have bee inside Ford, Chevy, and Dodge dana 60F axles and more often than not that is the case.
landon460 2 years ago
221 pretty good for a streetable truck :)
lynette1953 2 years ago
well damn....dodge axles are usually pretty thick so that must have been a big driving error
andysomethinsomethin 2 years ago 4
need traction bars, so truck don't hop!
heatseeker213 2 years ago 7
classic dodge cummins 12 valve baby
s2CoolDotCom 3 years ago 3
nice manly powerful truck, sounds like he sheered off a spring pin, and kept goin like nothing ever happened, plus drove away with the same kind of attitude, dodge is tough
immadodgeguy 3 years ago 2
The truck looks awesome! First Gen Dodges are the best trucks ever made! And the wheels are Alcoa's! I am looking for a set for my 92 W350 incase the owner ever wants to sell please let me know, along with the Ranch Hand front bumper! I have never seen a motor that can take just about anything we can do to it and still run for ever! Again, awesome truck!!!
Greddytwin350Z 3 years ago 2
sounds and looks to me he treated that dodge like shit
jjjhedder 3 years ago
There's no such thing as a poor-quality American truck. Get your facts straight.
CubanOverlord 3 years ago
Truck sounds awesome. Stop hating on anything American you stupid fucks.
CubanOverlord 3 years ago 2
This has been flagged as spam show
uMmMmMmMmm hai 2 u. bored? lets chat! im naked! =) maybe
hello world wG
bhentetrez23 3 years ago
c0000000l
mizzpipa 3 years ago
correct me if im wrong, but are those like 01-03 powerstroke rims?
syco1100 3 years ago
99-04 rims
1466puller 3 years ago
the turbo was broke in it its not suposed to sound like that
matj1990 3 years ago
dude all you can hear at the beginning is the turbo whistle, awesome
calebglennwalsh 3 years ago 2
Turbo whistle and no smoke...Nice.
racerboyGTR 3 years ago
thats one badass 1st gen. guess the axels couldnt hold all that power
turbocummins8993 3 years ago 5
Yeah sure dodges are shit i guess thats why they always win truck and tractor pulls and duramaxs win some but what about the powerjokes LOL
fulbrightjosh 3 years ago
This comment has received too many negative votes show
Typical Shit Dodge!
bobojd93 3 years ago
hey no kiddin,that turbo sounds shitty as hell
jjjhedder 3 years ago
Sounds like the piece of shits on it last leg.
bobojd93 3 years ago
well true
jjjhedder 3 years ago
dang it still looks as good as last time i seen it
obscuredninja 3 years ago
that turbo is loud sorry about the axle!
diselboy123 4 years ago
thats enough to make me cry that is terrible! sorry dodge
5peterbilt5 4 years ago
soon as it bounced just to much for ole' reds axels
smackface6 4 years ago
Dodge/Cummins is the KING in the light truck performance circles. General Mistake & ferd's V-8's 'wanna be' diesels can't hold a candle to the inline-6.
HasaDollwithaPin 4 years ago
when that truck came out chevy still had the shitiest engine ever made 6.2 shit and ford had something a bit better but still crap compared to CUMMINS
fordblowz 4 years ago
chevy+ford=shitty trucks, dodge=#1
fordblowz 4 years ago
dodge = Garbage
chevykicksbut 4 years ago
oh sh1t i want it thats a good looking truck will he sell it
obscuredninja 4 years ago
shit thats a badass looking truk i want one like that will he sell it
obscuredninja 4 years ago
Damn.. that turbo is painful to listen to!
turbosuperiority 4 years ago
Hm, nice truck no doubt. Just needs to be maintained better so none of that shit happens again. I didn't think the turbo sounded all that great unlike a few of you that have left comments.
XBlackedEyezX 4 years ago
That's all he did? That is sweet!!! Might try it to mine if the weather is clear and clean so I don't suck in any dust or dirt.
cumminsdiesel1234567 4 years ago
I DO NOT recommend that at all.
GasganoFJ60 4 years ago
that's moronic!
kerscrew 4 years ago
just kidding.
cumminsdiesel1234567 4 years ago
He doesn't have the air intake hose hooked up to it, so he's running no filter.
Begle1 4 years ago
I spoke to the guy after his pulls, he was running an open intake and his belt broke and a piece got sucked up inside the turbo. That noise isnt a good noise. His turbo is borderline fucked. Whats funny though is that the guy thought it sounded awesome........ :-/
GasganoFJ60 4 years ago
thats because the guy is a dumb ass prick
Ephaiston 4 years ago
Why does that turbo sound so good??!!
cumminsdiesel1234567 4 years ago