in the words of a gun shop owner if you buy a kimber 1911rust bucket...Do not look at the barrel or it will rust. Do not touch the barrel or it will rust, Do not think about the barrel or it will rust. Do not carry the kimber 1911 because it will rust, then he said wait look what just walked in(a shipment of kimbers 4 to be exact) pulled them all out and from the factory all of them had rust on the barrel just from shipping. Never will i ever buy a kimber. got a sig 1911 no rust ever.
Im pretty sure that milspec do not have a guide rod. Also the A/C in your car removes moisture from the air in the car. The condensation usualy gathers on the condencer(typicaly under the hood) so if there is a lot of moisture in your glove box as in enough to rust your gun you may want to have that looked at that would be enough to ruin most peoples papers that are ususaly stored there.
You are so retarded I LITERALLY get embarrassed for you when I watch you stutter, stammer, and misspell your way through minute after minute of pointless and pathetic babble. You do realize, by the way, that the AR-15 (even with a ridiculously oversized scope) is NOT a "sniper system" as you call it. It may be good for plinking at 100 yds, but a "sniper system" it is not. A "MAN'S" sniper system wouldn't use an AR. But I do have good news for you: you just won the d-bag of the year award!
Correct me if I am wrong but A/C doesn't put out humidity isn't it even a sort of dehumidifier since they say that if your car interior is wet that you should run the A/C on full blast. I too have a Kimber that had a few rust issues at first but got it under control.
a thin coat of of some clp or even lubriplate grease will keep it from rusting. considering how you carry i would say just use a lil bit of that grease and it wouldnt do that
I have an ultra carry 2 and a product I have found works great is flitz polish. I take it to the whole gun then oil after. Works great for me I have been carrying it and shooting it for over three years now and no failures ever. Good info in ur vid I will pass it on to my friends
kimber barrels are not stainless, they are carbon steel in the white. thats why they rust easy. i have a ultra carry II it rust all the time, it drives me nuts. but my problems are bigger than the rust, it ftf's all the time. i can't trust it. it's going.
I looked at my friends Kimber today and the barrel was all rusted. He didn't have the stainless barrel and never took care of it. I think it will come off though.
I dont know about everybody else but i'd be pissed if my $1500 gun started to show any kind of rust. none of my pistols rust and they were all a fraction of the cost and not one jam from thousands of rounds.
Yeah, But I give you all the good along with the bad here on my channel, and this is the only bad I ever experienced, and is easily fixed with a little dab of mothers chrome polish. All Kimbers are known to do this. Also remember I keep this pistol where moisture from the A/C is hitting it constant, until I exit the vehicle.
@155Millimeter Air conditioned air actually has less moisture in it than normal atmospheric air does. The refrigeration cycle actually removes humidity from the air. This is why the defrost mode on your car enables the compressor if you have one.
@Reapers261 I got ahold of Kimber and they sent me a brand new barrel with a protective coating that was better than the factory one and I didn't have to pay a dime for it. So it probably is better off to buy a gun from somewhere other than Walmart so that you have a real company backing your warranty.
@theiss248 I don't know about that. WalMart has a good return policy. If you got your Kimber at WalMart they probably would have just replaced your rusty, overpriced peice of crap Kimber with another that same day.
HOLY MOLEY BROTHER! MAN YOU ALWAYS BRING UP THE GREATEST POINTS IN VIDEO COMMENTS! I WILL DO A VIDEO OF THIS BROTHER AND GIVE A SHOUT OUT TO YOU IN IT!
Please don't think I'm busting any balls cause I'm not, but from what I know about metallurgy, Lower or cheaper grades of stainless steel rust. You can also tell a lower grade of stainless steel by putting a magnet to it. A cheaper grade will be magnetic because of a higher steel/iron content. Higher grades will not be magnetic and will not rust due to a higher nickel content. Just my two cents about the metal. Sweet pistol 155, wish I could afford one :)
LOL! You may be right, I figured like this I'd give the goods and the bads, and Kimbers do rust on the barrels, but it comes right off with this mothers chrome polish.
@155Millimeter That's cool, and some good info too. Like I said I'm not busting any balls. Just giving out some info on what I know about metal. Thanks for the reply.
@Uncle155 Damn you want rust come to Canada where salt on the roads in the winter kicks our cars asses but with guns we only get humidity 2 months a year so my Sig has never had a spot of rust on it & I love that Kimber !!!!
@SauerTongues4 The drivers in Canada scared the crap out of me. I was driving my rear wheel drive 1997 Ford T bird and it was icy out and people were going 90 mph. Spraying salt all over my classic. lol.
@bllw69 We drive in it all the time and are used to it !! The Chinese however watch out for then squint eyes they ride bicycles back home then come here and oh boy !!!!! We abouts you from ?????
@SauerTongues4 NY so we get the -40 windchill and salt also. I went to Toronto one time and half the people were eating rice and wearing funny hats. Even pizza shops were owned by Asians.
cool informational vid on the mothers cleaner. and you should check out the powrball ammo for feeding i made a vid on it the other day feeds outstanding.
I've put 400 rounds target ammo thru her so far one jam only. And that is unlike Kimbers, usually you have multiple jams before the first 500 rounds. These Hollow points cycle great, I went thru a box of them already.
I still have an "Itac defense" Polymer holster. It has no effect on the Kimpro finish. I usuall have to scrub the black marks off the Kimpro finish, because the holster wears and makes marks on the Kimpro. But I will do an updat soon to show the Carry finish wear on my Kimber.
in the words of a gun shop owner if you buy a kimber 1911rust bucket...Do not look at the barrel or it will rust. Do not touch the barrel or it will rust, Do not think about the barrel or it will rust. Do not carry the kimber 1911 because it will rust, then he said wait look what just walked in(a shipment of kimbers 4 to be exact) pulled them all out and from the factory all of them had rust on the barrel just from shipping. Never will i ever buy a kimber. got a sig 1911 no rust ever.
teaparty8221 2 weeks ago
My Kimber never rusted and I fired almost 5000 rounds.
semiautoriflelover1 1 month ago
That Kimber like most of their models DOES NOT have a stainless steel barrel, it's untreated carbon steel.
pray4mojo35 1 month ago
colt will always winout in the end bitch monkey
gto3440 1 month ago
Have your wife or girlfriend listen to this video from 2 minutes onward and ask them what they think you're watching? HAHAHA "look at that"
bboo419 2 months ago
A very many "DEAD" Japs, Germans and Vietcong would not know the difference. Would they? Thanks again!
bain5872 4 months ago
Im pretty sure that milspec do not have a guide rod. Also the A/C in your car removes moisture from the air in the car. The condensation usualy gathers on the condencer(typicaly under the hood) so if there is a lot of moisture in your glove box as in enough to rust your gun you may want to have that looked at that would be enough to ruin most peoples papers that are ususaly stored there.
Pooshooter5k 4 months ago
Comment removed
thepeoplesdefense 5 months ago
huh kmiber not jam i don't believe you
masterofnotmuch2 7 months ago
Colt sucks donkey dick. Kimber for the win.
ALABAMAFORCERECON 7 months ago
Just another idiot with a crape Kimber. "A man's gun" garbage!!!
moulen5359 8 months ago
I've seen a lot of Kimbers rust... Glocks Don't. Kimbers are not worth the Money.
DefendAZ 10 months ago
hey buddy, still got no balls
grandytroll 1 year ago
My glocks never rusted, i keep the damn thing on ice!
TheMango121 1 year ago 2
You are so retarded I LITERALLY get embarrassed for you when I watch you stutter, stammer, and misspell your way through minute after minute of pointless and pathetic babble. You do realize, by the way, that the AR-15 (even with a ridiculously oversized scope) is NOT a "sniper system" as you call it. It may be good for plinking at 100 yds, but a "sniper system" it is not. A "MAN'S" sniper system wouldn't use an AR. But I do have good news for you: you just won the d-bag of the year award!
alphazuluz 1 year ago
@alphazuluz Im partial to the Remington R-25 system... very effective when a high-powered scope is involved
1911YoungGUN 10 months ago
Mother's will protect quite well against humidity caused rust in steel in my experience - you should take the gun down and do the whole barrel...
MonteBusa 1 year ago
Correct me if I am wrong but A/C doesn't put out humidity isn't it even a sort of dehumidifier since they say that if your car interior is wet that you should run the A/C on full blast. I too have a Kimber that had a few rust issues at first but got it under control.
theiss248 1 year ago
Comment removed
theiss248 1 year ago
a thin coat of of some clp or even lubriplate grease will keep it from rusting. considering how you carry i would say just use a lil bit of that grease and it wouldnt do that
stewpidaso26 1 year ago
I have an ultra carry 2 and a product I have found works great is flitz polish. I take it to the whole gun then oil after. Works great for me I have been carrying it and shooting it for over three years now and no failures ever. Good info in ur vid I will pass it on to my friends
fstthndrbrd 1 year ago
kimber barrels are not stainless, they are carbon steel in the white. thats why they rust easy. i have a ultra carry II it rust all the time, it drives me nuts. but my problems are bigger than the rust, it ftf's all the time. i can't trust it. it's going.
1962egl 1 year ago
@1962egl That sounds like your magazine.
Kylef7735 1 year ago
@Kylef7735 it does it with all magazines. besides i didn't buy this so called high end 1911 to have to work bugs out of it. thats bullshit.
1962egl 1 year ago
@1962egl I 100% agree with you there my friend, A gun that costs that much should at least work.
Kylef7735 1 year ago
I looked at my friends Kimber today and the barrel was all rusted. He didn't have the stainless barrel and never took care of it. I think it will come off though.
semiautoriflelover 1 year ago
*hugs rust impervious Glocks*
MegaGewehr 1 year ago
gotta knock the dust off every once and a while. Shows how durable that barrel is.
willwood487 1 year ago
I dont know about everybody else but i'd be pissed if my $1500 gun started to show any kind of rust. none of my pistols rust and they were all a fraction of the cost and not one jam from thousands of rounds.
Reapers261 1 year ago
@Reapers261
Yeah, But I give you all the good along with the bad here on my channel, and this is the only bad I ever experienced, and is easily fixed with a little dab of mothers chrome polish. All Kimbers are known to do this. Also remember I keep this pistol where moisture from the A/C is hitting it constant, until I exit the vehicle.
155Millimeter 1 year ago
@155Millimeter Air conditioned air actually has less moisture in it than normal atmospheric air does. The refrigeration cycle actually removes humidity from the air. This is why the defrost mode on your car enables the compressor if you have one.
a2birdcage1 2 months ago
@Reapers261 I got ahold of Kimber and they sent me a brand new barrel with a protective coating that was better than the factory one and I didn't have to pay a dime for it. So it probably is better off to buy a gun from somewhere other than Walmart so that you have a real company backing your warranty.
theiss248 1 year ago
@theiss248 I don't know about that. WalMart has a good return policy. If you got your Kimber at WalMart they probably would have just replaced your rusty, overpriced peice of crap Kimber with another that same day.
Reapers261 1 year ago
Not sure if you heard, but the other day a British sniper killed 2 terrorists at 1.54 miles with his .338 LM Accuracy International rifle.
He currently now holds the record for longest kill with a sniper rifle and he literally killed them one right after the other.
Crazy stuff and really shows you what the .338 LM is capable of.
hydrashok556 1 year ago
@hydrashok556
HOLY MOLEY BROTHER! MAN YOU ALWAYS BRING UP THE GREATEST POINTS IN VIDEO COMMENTS! I WILL DO A VIDEO OF THIS BROTHER AND GIVE A SHOUT OUT TO YOU IN IT!
155Millimeter 1 year ago
Please don't think I'm busting any balls cause I'm not, but from what I know about metallurgy, Lower or cheaper grades of stainless steel rust. You can also tell a lower grade of stainless steel by putting a magnet to it. A cheaper grade will be magnetic because of a higher steel/iron content. Higher grades will not be magnetic and will not rust due to a higher nickel content. Just my two cents about the metal. Sweet pistol 155, wish I could afford one :)
Trex1268 1 year ago
@Trex1268
LOL! You may be right, I figured like this I'd give the goods and the bads, and Kimbers do rust on the barrels, but it comes right off with this mothers chrome polish.
155Millimeter 1 year ago
@155Millimeter That's cool, and some good info too. Like I said I'm not busting any balls. Just giving out some info on what I know about metal. Thanks for the reply.
Trex1268 1 year ago
mothers is awesome
jeffxl12 1 year ago
lol I still like my G-21..13 round mags...Your Kimber can't do that.....as a standard mag...
BUBBAEFFECTx6 1 year ago
@Uncle155 Damn you want rust come to Canada where salt on the roads in the winter kicks our cars asses but with guns we only get humidity 2 months a year so my Sig has never had a spot of rust on it & I love that Kimber !!!!
SauerTongues4 1 year ago
@SauerTongues4
LOL! Thanks bro, and sorry I have not been replying, I will get on the ball, I just got off of vacation, I'm going to check out your vids right now.
155Millimeter 1 year ago
@155Millimeter Thanx brother !!!
SauerTongues4 1 year ago
@SauerTongues4 I drove to Toronto to visit the Hockey Hall of Fame and my car was so covered in salt it went from green to white.
bllw69 1 year ago
@bllw69 Wow we are all over the YT map Ya we love our sodium to lazy to plow the bastards !! My Grand Prix's rockers are chewed !!!
SauerTongues4 1 year ago
@SauerTongues4 The drivers in Canada scared the crap out of me. I was driving my rear wheel drive 1997 Ford T bird and it was icy out and people were going 90 mph. Spraying salt all over my classic. lol.
bllw69 1 year ago
@bllw69 We drive in it all the time and are used to it !! The Chinese however watch out for then squint eyes they ride bicycles back home then come here and oh boy !!!!! We abouts you from ?????
SauerTongues4 1 year ago
@SauerTongues4 NY so we get the -40 windchill and salt also. I went to Toronto one time and half the people were eating rice and wearing funny hats. Even pizza shops were owned by Asians.
bllw69 1 year ago
@bllw69 Ya so why complain lol !!!! They have invaded my great white land !!!!! WTF
SauerTongues4 1 year ago
cool informational vid on the mothers cleaner. and you should check out the powrball ammo for feeding i made a vid on it the other day feeds outstanding.
ShireyPokerKing 1 year ago
great Video 155 Millimeter
pik93 1 year ago
Nice , I use flitz same idea . LOL
krazy45cat 1 year ago
Dude if wanna be a man get a taurus 1911 lol
GT03235 1 year ago
This has been flagged as spam show
Had you bought a Glock, you wouldn't have this problem in the first place.
promoatlking 1 year ago
Comment removed
promoatlking 1 year ago
Hehe including the title, you say kimber 16 times in this video. :). Five Kimber stars Kimber.
lambdog76 1 year ago
prob sholved grease on a patch will put a smoth coat on ur bb lan willnt hurt it at all what ammo do u carry in this for defence
curtispa 1 year ago
@curtispa
230 grain Hornady Tap Hollow Points.
155Millimeter 1 year ago
@155Millimeter and u have np orb with the hp jamin alot of ppl still think they would whats ur 1911 run new ?
curtispa 1 year ago
@curtispa
I've put 400 rounds target ammo thru her so far one jam only. And that is unlike Kimbers, usually you have multiple jams before the first 500 rounds. These Hollow points cycle great, I went thru a box of them already.
155Millimeter 1 year ago
@curtispa
I also polished the lower lip feed ramp of my Warrior's barrel with the Chrome polish, when I clean it.
155Millimeter 1 year ago
I never thought of using that.Learn something new everyday. Thanks.
Mr45Bullitt 1 year ago
@Mr45Bullitt
It works good, I can now see my reflection in my barrel.
155Millimeter 1 year ago
great tip we have always used #0000 steel wool to remove rust from our firearms but i will deffantly have to give that a try
bigjohn20081983 1 year ago
Good thing both of my 1911 are kimber, tactical 2 and eclispse target2. good vid LOL
Mr2fierce 1 year ago 4
@Mr2fierce LOL!
155Millimeter 1 year ago
@Mr2fierce
LOL! The only thing better than a Kimber, is two Kimbers! Ha! Ha!
155Millimeter 1 year ago
Which holster did you eventually settle on?
bladeimm 1 year ago
@bladeimm
I still have an "Itac defense" Polymer holster. It has no effect on the Kimpro finish. I usuall have to scrub the black marks off the Kimpro finish, because the holster wears and makes marks on the Kimpro. But I will do an updat soon to show the Carry finish wear on my Kimber.
155Millimeter 1 year ago
The rust wasn't from tears was it? I heard that real men aren't afraid to cry.
lambdog76 1 year ago
@lambdog76
LOL! I just figured I'd give the colt guys back some of what they give the Kimber guys. LOL!
155Millimeter 1 year ago
@155Millimeter lol or was from the tears of the price u payd for that kimber lol Springfield man myself, just thought id rattle the cage alittle
skinsup84 1 year ago
@skinsup84
LOL! No from tears of the price I paid on Barrett. LOL!
155Millimeter 1 year ago
@155Millimeter did you see in the rifleman mag your Barrett got rifle of the year award.
skinsup84 1 year ago