pdrplus Paintless Dent Removal

[SpaceKid1500]

Holy shit his dent looked liked a pair of lips that were just talking away.

[tallica4us]

yeah like we got all these tools... also thats a very lucky dent. bravo with leaving a huge dent without any scratches!

[syalcin123]

was it so hard to open trunk first and punch a few times instead of wasting time with your sticky things?

[5dmc1]

@syalcin123 doesnt give it as smooth of a finish, also good for fenders.

[iykist]

@syalcin123 In most cars you can't get to that part of the car even with the trunk open, you have to drill through the inner panel to get to the outer body panel.

[HandsofGold92]

Still had a lot of dents on it. And lucky that the paint didn't crack. And you'd probably be left with a buckle from the metal stretching like that

[hobo101101101]

still has dents

[seapeddler]

It would be nice if windshields just got dents as well. In the future, all dents must be removed by those wearing a thong only.

[jehranicus]

kit available in the Phils?

[Spoolin51]

Definition: Women - The cause of all dents

[gunnertonpandaman]

Good demo now how do I find the kit in the UK? A lot of demos wouldn't try shuch a bad dent,& you never see the hole thing being done. Thanks now I have to get my son to have a go he needs a new job, could he make a living at this?

[seires2000]

прикольно. молодцы!

[IbonedDerekDsister]

Lets see these guys do this on my 96 Trans Am...same dent but there's no way to get to in from the inside.

[abbj2001]

How much will it cost to reapir a dent like in this video? Also, how much time does it take to finish this job?

[1963ozcan]

@abbj2001 it realiy works if the dent is acessable behind the panel but it realy needs a professional hand not a do it yourself job

[Justwanttobeloved34]

still was low. good job as far as doing it outside with a ding board, inside with a light and it would've been perfect.

[KJamesSr]

Where can I purchase this dent puller? and what were you doing on the back side of it?

[Exempttt]

good video but that music made me wanna switch it off.

[fofom211]

woow that looks new

good good good jop

[lilkountrydog]

looks like an ass print..

[underoathfan14]

wow! that looks super good!

I have a massive dent on the side of my box on my truck that I really want fixed now.

[chkmag3610]

@underoathfan14 I know! Doesn't it drive you crazy, and it would cost a fortune to take it to a body shop.

[underoathfan14]

@chkmag3610

I know. I called one and they claimed I needed an entire new box on my truck.. they said it'd ONLY cost me $2000ish bucks...

ONLY. my truck has 202,000+ miles on the odometer and it's not worth putting a a whole new box on it. haha

[yukonrott]

@underoathfan14 i dont know what kind of truck u got but if they are charging u 2000 ur gettin screwed. u can buy a box at almost any junk yard for maybe 500 bucks and painting isnt that hard.. u can do it yourself and learn stuff along the way.. "THE MAN" tries to screw u every day... if you have a garage and an air compressor u can do repairs yourself...

[roadstar982003]

I even use glue tabs and push tools when I know its gonna take paint..

[KOLIN006]

Не машина, а консервная банка!

[paintballgundown8]

usually the crease in a bodyline will make any attempt at dent removal very difficult. it is possible to make it look even better but it takes much more time effort and skill

[TsstCoon]

small dents are still there

[ADSaaron]

Mauybe its just the video quality but the countour line still looked kinda..... not straight? over all though, that was an amazing job

[351cleavland]

@ADSaaron probably because with this kind of severe dent the metal is usually stretched. When it is popped back in place the stretch will alter the shape of the panel.

[solo2004]

ANYWAY NEED BANDO

[mubd1234]

I'm pretty fat and I leant on the side of my car and made a nasty dent.

[finpainter1]

probly deer hit and repair not great.insurance would have to do it over if it was my car..

[joaquimjplima]

esta uma bosta!!!

[misheper]

На русской давно бы краска отлетела а вмятина осталась.

[aapachtigbeest]

tel sell is selling a towel, you wipe over the dent and its gone, just like the banks with our money.: D

[Vanphohuynh]

WHAT WAS THE BLACK THING THAT YOU WERE USING TO PULL THE DENT OUT AND YOU KNOW WHERE TO BUY IT INCLUDING THE TOOLS?

[anticsabijach]

@Vanphohuynh it's hot glue plastic, you use a gun that melts plastic tubes(on the end of the gun) into "glue"..(have no way how to explain it in english differently, hope it helps)

[DavoMateee]

lol old school miracle system

[Mista745]

Freaking wavy ass hell pretty sure it looks like crap in person

[denttime]

@Mista745 Actually it looked quite well considering we weren't given the time needed to make it beyond satisfaction. But it was a dealer and they didn't want to put the time or money into it. If you understand dealerships, you'll understand my response.

[Davidanny4]

nice job

[javafield]

waw excellent job guys

[swordfish020]

dang thats cool

[SuperScand]

vraiement bons les gars !!

[GTODents]

They aren't suction cups, they're tabs that are glued onto the car. They can be popped off with the slide hammer, or by spraying on a releasing agent.

Nice repair by the way...

[kakawkaization]

awesome

[grh1655]

THEY DON'T SHOW YOU HOW TO GET THOSE SUCTION CUPS OFF.

[296jayce]

talk about a hard hit, it look like someone was fighting or playin around and slammed or got slammed into the car, or at least fell into it lol

[jsdhesmith2011]

Thats just bad ass, now I want to learn this and go make some money!

[chimoyans]

wow magnificient how i wish someone counld help me with my dent

[Tony07UK]

What's with the stupid bongo drums in the background?

[mojostudio]

@Tony07UK there are no bongos here.

[Xonipher]

@Tony07UK they're not bongo drums

[Glockinmypock3t]

holy fuck my ass

[MrKlemensas]

i dont really think, that this kinnda technic will laste long , cause, metal has a good memory, it will be enough just tu push it a bit and the dent will appear again.

[capthowdy126]

i got a mustang with a spot smaller than that i wounder if anyone close to me can do the same as u did

[bennettvonbennett]

question - is that a hot wax or a hot glue gun? I like that it didn't leave any residue at all... also - is that flat panel magnet thingy a custom job?? super cool!

[stangdude360rs]

hi yes i have a 2011 taurus and i found a dent right up the left corner above winsheild is that fixablee ?? thanks

[smart32231]

its an improve to paint but nothing else....



[CollapseDB]

Probably a cat fallen down from the sky

[Veikra]

@CollapseDB yeah, been raining cats and dogs lately.

[brianthomas88]

fail! the body line was still messed up, and can you say "oilcan"!!!

[Bunnypunker]

@brianthomas88 Yes but it's a choice between an expensive replacement or 1/3 the price of the part.He chose the second and it's a decent work.

[NICK97422]

Ohh Nice work !

[soulcalibur22]

that mans ass is way out his pants rofl at the begining hahahaha

[MaarkxD]

What equipment did you use to do that?



[MrTitos1000]

de donde sonn???????

[MrTitos1000]

la verdad ta genial !!!!!!!!!!!!!!! lastima q aca en yucatan no ay eso

[Mel17029]

Where do u get one of those??????????

[garabato38]

Magical

[Goldplatedhawk]

to the ppl in the top comment it was for training so obvisoly it was made on purpose

[denttime]

@Goldplatedhawk Wrong... I train on real cars that happen to have real dents. This was a perfect example. There are plenty of big dents to do without making them.

[yamahabansheerider]

if their was a hard hit and made a crease in the body could that device pull it out and look like new again?

[RIP28397]

what is that thing on the window and what is the use of that thing thanks

[neond1984]

@RIP28397

when there is a dent in the metal, the lines appear curved and wavy in the reflection on or around the dent. if the lines appear straight, then the dent is ompletely gone.

[jhowe67]

is there a kit i can get for this? i have one of those dents on my truck.

[1979camaro916]

try doing that to a CLASSIC car.. lol

[cantucki]

what that at 220 man the thing stuck to the door with a panel?

[llamaking12]

@cantucki I think to check how strait the panel is

[ErlendRagnaMusic]

i wonder how he managed to make this big dent without scratching the paint...

[DJzSith]

@ErlendRagnaMusic drunk fat chicks

[st162man]

@ErlendRagnaMusic

they had snorlax body slam it



[123LNR]

@ErlendRagnaMusic - Someone hit the side of me, and I've got a dint across that panel (Rear right light to rear right door) and the paint isn't scratched...

[vikzzor]

@ErlendRagnaMusic there was a pillow-fight and one damn big pillow hit the car, but they were lucky they wasn't closer to the refrigerator fight a block away.. 

[Weldin810]

@ErlendRagnaMusic A fat drunk guy stumbled into the car

[ErlendRagnaMusic]

@Weldin810 no, chuck norris breathed on it :)

[XXXlilflipXXX]

@ErlendRagnaMusic 

ole chick norris is played out sir get a life

[MrRaptur3]

@ErlendRagnaMusic some big ass cheeks...

[shooteru]

@ErlendRagnaMusic I have 2 dents on my driver door from hitting a deer... I was driving 60 m/hr and I had like 5 deers crossing the hwy right in front of me.. I did brake but was too late and the last deer just hit me on the driver side... he broke the mirror and made two big dents. These video is very useful for me at least. :)

[bl1ndr]

how much would it cost to fix a dent like this?

[FRANCODIVER666]

>_<



[klopatnik]

@axlklms Please can you tell me where can i find this product ? Thanks and nice work.

[savagenomore]

after growing up in a body shop, I have to say I'm impressed.....

[MrAlexdesousa]

Paintless was created in Brazil 30 years ago.

[buddyclubs]

after it was done its not perfect, you can still see a lot of crease

[HULKZombie]

Good work

[SqueakyBoy92]

How the hell does a dent get on that part of the car that damned big?!!

[XanderionX]

@SqueakyBoy92

A bumper on a SUV is one example. Happened to my Civic

[SqueakyBoy92]

@XanderionX Ok, that makes sense.

[XanderionX]

@SqueakyBoy92

When a SUV is backing up on a parking lot, it's bumpers are a lot higher compared to lower middle sized cars. So when He hit's the car, it will be in the center of the middle sized car. That explains the big dent.

[MrGoldenBong]

@XanderionX Or the driver was a woman.

[KaylinJH]

@SqueakyBoy92 be in canada when they lose a hockey game

[bbsmyname]

@SqueakyBoy92 kick your car in a fit of rage... happened to my mustang lamo. except i got a Bondo suction cup and pulled the dint no stupid gluing. seemed like a gimmick but it worked. and only took a lil spit on the suction cup and 30 seconds.

[nutzw1]

@SqueakyBoy92 Chuck Norris playing soccer



[frostedhead]

It still looks shitty, show me some flawless work...

[Haraldur34]

@frostedhead looks shitty indeed, my thoughts exactly.

[cfldentrepair]

Dealership or no dealership.Wouldn't touch that for less than $250(quarter panel alone). $65 for the whole car? What the hell has this business come to? Nice Work though!

[dougdenter]

@cfldentrepair I'll see your 250,,and bid,, WHY would anyone work on that for 65$

practice or NOT, that is way to cheap for our industry

[onyx6462]

what was dat sticky stuff you was usen..?

[axlklms]

Thank you all for you comments. That car was was part of our training process form Myke Toledo (dent time). It’s true that the car wasn’t 100% fixed, we needed a couple of hours more time that we didn’t have, but the dealership was quite happy with the result. Myke gave us that task at the end of our second week of training. We are very pleased and grateful with our choice of learning the technique of pdr from Myke, because now, back home, we have a very successful company.

[onyx6462]

@axlklms what was dat sticky stuff you was usen..?

[aponkye1001]

@axlklms How do you get hail dents from the roof of a car.I have not seen anyone do that yet.

[Antra10992414]

Maybe two or three more hours of work? I guess for the difficulty of a dent in this case, the waves disappear just spending long hours and patience. Anyway, great job

[ocdentman]

Great work considering that it's obvious he's at a car lot and probably only got $65 for the whole car! Nice work though. Only dent guys will see the wave

[denttime]

@ocdentman You are right about one thing - it was at a car lot. But the $65 thing is way off. If you don't think your own skill is worth more than $65, then it's time to look for another career,

[denttime]

I trained these guys and they are very good. They are from Athens, Greece.

[trje246]

lmao! at first i thought it read 'pdrplus pointless dent removal' LOL. pretty cool technique, got most of it out.

[bns8224]

That was a hard dent to do, but that body line came out pretty wavy. Toleydo could have fixed that!

[antalyanight]

perfect working

[craigfour]

what was it like when it was finished!!

[denttime]

@craigfour It looked pretty obvious it was finished to me..

[tonysmobileautobody]

hi ,,,, where can i get 1 ..email me back

[podpromotions]

That dent is way more complex than you all think. It's funny how so many people think glue pulling is easy and is the answer to pdr repairs. Did you see the major crease going through the body line inside the dent itself? Soft metal, lots of kinked metal, highs and lows.. it was a mess! Good repair.

[Cunova]

I hope u didn't leave it like that?

[MrHustlerecords]

okay but still has a wave alittle