13:14:37 : [011,700,147,062,092]Problem with communication between cell phone and PC\n\n[009,400,102,102,102]To restart from the beginning, disconnect and connect the USB cable and battery, \nthen power on your cell phone and try according to instructions. This will \nnormally complete update.If not, please visit the LG Service Center.
13:14:37 : *********** End of Page_DeepError() *********
i also got a communication problem when following your guide, but ive noticed that theres a way easier method to successfully flash the kdz file ... just turn your phone off, pull the battery, and while pushing the "vol down" button plug in the usb cable to your pc. the device will turn on... keep holding the vol down button till the screen displays "software upgrade mode" or something similar. let go off the button and start the flashing process. hope this helps
@skootb2 i did the "easier method" with a lg optimus speed (it should however work on similar lg devices too). its simple to get the device into ready-to-flash mode. just follow the steps i explained in my last comment.
@MrMaffen okay. can you give me a link to a form that shows waht software and files in suppoesed to use with the lg thrill or optimus. even information on how you did it with your optimus im sure i can find the opposite files for my thrill
Getting a problem while trying to flash. My computer recognize the OMAP device, but the phone just giggles from connected to deconnected and never stays connected more then a second or two. Also when holding the power and volume up button phone just start or stop the "jiggling" but never vibrates nor stays connected. Am I totally bricked and have to go for warranty repair? tried many usb ports many wires and always the same problem...
There is no prior driver download that i know of. Also read a couple of posts down there is another way to do it
trekfan422991 3 weeks ago
when I do this LGE Mobile USB Serial Port (COM9) doesn't appear....... nothing does, is there a driver for that port im suppose to download?
sketch2k278 3 weeks ago in playlist Favorite videos
My phone restarts on 50% update process, and "OMAP driver found" problem continues on Windows. Any help?
branislaws 1 month ago
13:14:37 : [011,700,147,062,092]Problem with communication between cell phone and PC\n\n[009,400,102,102,102]To restart from the beginning, disconnect and connect the USB cable and battery, \nthen power on your cell phone and try according to instructions. This will \nnormally complete update.If not, please visit the LG Service Center.
13:14:37 : *********** End of Page_DeepError() *********
branislaws 1 month ago
good to know! thanks
trekfan422991 1 month ago
i also got a communication problem when following your guide, but ive noticed that theres a way easier method to successfully flash the kdz file ... just turn your phone off, pull the battery, and while pushing the "vol down" button plug in the usb cable to your pc. the device will turn on... keep holding the vol down button till the screen displays "software upgrade mode" or something similar. let go off the button and start the flashing process. hope this helps
MrMaffen 1 month ago
@MrMaffen dude please make a video of your easier process!! many people will need it including me! Thanks bro
skootb2 3 weeks ago
@skootb2 i did the "easier method" with a lg optimus speed (it should however work on similar lg devices too). its simple to get the device into ready-to-flash mode. just follow the steps i explained in my last comment.
MrMaffen 3 weeks ago
@MrMaffen okay. can you give me a link to a form that shows waht software and files in suppoesed to use with the lg thrill or optimus. even information on how you did it with your optimus im sure i can find the opposite files for my thrill
skootb2 3 weeks ago
Getting a problem while trying to flash. My computer recognize the OMAP device, but the phone just giggles from connected to deconnected and never stays connected more then a second or two. Also when holding the power and volume up button phone just start or stop the "jiggling" but never vibrates nor stays connected. Am I totally bricked and have to go for warranty repair? tried many usb ports many wires and always the same problem...
bcharlesgagne 2 months ago
Thanks worked for me! I was getting communication error too. Now I'm on a new GB rom.
Sen4oo 2 months ago
not if you already have done it once before. if the first time then yes... its safe so long as you dont interrupt any processes
trekfan422991 3 months ago