i opened my iphone because my headphone jack wasnt working, i fixed it and put it back together but then parts of the screen, the touch wasnt working. i opened it to see what was wrong and couldnt figure it out. so i just closed it back and now i try to turn it on , i just get a white blank screen. anyone know what wrong? ( i dont think i connected cable 3 but it still turned on)
thank you for this video. i opened up my iphone to replace the home button... repairing actually, and i kind of blurred on actual step to re assemble the phone. thanks thanks and thanks!
@MultiMixedMedia hope u got number 3 in. U have to push the Clip up at 45 degrees and hold the screen and slide it in. U don't have to slide a great deal in as mot all is suppose to slot in. Then close the clip shut which wedges it in.
Nice video - but I was looking to see how ribbon 3 was put in - thought it was from the bottom, but thanks to a commenter I see it's from the top. Nice tutorial - would have preferred close up on Ribbons 3, 2, 1 though. But thank you.
Is the screen display supposed to have a seal because I'm trying to pry it out but it's stuck? And if I do take it out am I supposed to have a back up seal for the screen if there is any/
@gega24 No, sadly it does not. I got a white replacement and am hoping to figure out how to change it over to a white rubber piece. This piece is also very easy to damage while changing the digitizer.
Order my cheap guide on iPhone repair and fix ANYTHING that goes wrong with your iPhone, Moneyback Guarantee ! NOT a scam ! Just check out my channel for the link :)
the bottom white portion of the #3 plug must be pried up into a 45 degree orientation..then slide the ribbon in from the top then push the white part back down til it sits flush with the rest of #3 plug. Then the #3 ribbon is "locked" in...not that hard...just this vid doesn't show it very well
the bottom white portion of the #3 plug must be pried up into a 45 degree orientation..then slide the ribbon in from the top then push the white part back down til it sits flush with the rest of #3 plug...not that hard...just this vid doesn't show it very well
@lucresio10 Step 1) Unlock the black latch (it opens up like a hinge). Step 2) Insert the Cable 3 (Note: You will still see the golden contacts of the cable even when the cable is fully inserted). Step 3) Now close the latch by turning it down.
HOW CAN I GET CABLE 1 IN!?!?!?!?!?! everything else is easy but number 1!!!!!!!!!!!!!!!
i think it goes in but the screen doesn't turn on and it will easily come back out so i don't think i'm doing it right! does any one have some tips for me i really need to get it in!!
alright i have done that but after the replacement the screen stays black unless i turn it on but then it goes white for a few seconds and then back to black
alright i have done that but after the replacement the screen stays black unless i turn it on but then it goes white for a few seconds and then back to black
can u help me plz? my iphone 3g was havn this problem, wen u press down hard on the top part of the screen, it goes white, then u have to tap the back for it to go back 2 normal. so i ordered parts to open it up but when i did i didnt no u had to open it from the bottom 1st and i pull straight up and ripped up all the cables. i did notice that the thing hold connector 3 in wasnt pressed down. i put all cables bak like u said and i dont see anything on my screen. i can still hear it. plz help....
Ok I had the exact problem after I replaced my iPhone's housing. I knew that I had done everthing perfectly because iTunes still recognized my phone when I plugged it in. This is what I did: I held the Power and Home buttons simultaniously and Tadah!! I saw the apple logo and then the phone started up normally. I hope this helps. :D Though I hope you've gotten your phone to work by now I just wanted to share with everyone else who might have the same problem
i opened mine and put it back together, now my screen or buttons arent working... if i plug it in to my computer, it makes the connection sound, and is connected, but my screen doesnt show anything
@Gannondalf ::Ok I had the exact problem after I replaced my iPhone's housing. I knew that I had done everthing perfectly because iTunes still recognized my phone when I plugged it in. This is what I did: I held the Power and Home buttons simultaniously and Tadah!! I saw the apple logo and then the phone started up normally. I hope this helps. :D Though I hope you've gotten your phone to work by now I just wanted to share with everyone else who might have the same problem ;D
@flexdex2 i woke up the day after this and my screen was working again, but my home button wasnt... i couldnt get it to work. so i just bought a new phone :D
Hi. A few months ago I bought and replaced my iphone's digitazer. It worked ok, then the LCD went gray, I thought it was a matter of replacing it aswell sou I did that. Problem is the new one also appears gray all the time. What should I do now. Please help!
When putting cable 3 in flip the plastic part at the opposite end of the connector up. That opens the connector. Then it is easy to slide the ribbon cable in. Then push the plastic switch down.
My Sleep/Wake button doesnt function properly after i screw it in. When i press it, it just stays down and I cant hear or feel the button "click". Please someone help me :(
@CaTcHaFiShBiTcH ; I had the same problem. For Cable #3, there was a white line across the connector, I slid the cable in to the port until this white line was even with the end of the mainboard. Once I did this, I noticed that the mute slider would vibrate when toggled on/off. So, the phone had to be 'on'. I connected the phone to my computer and did a restore within iTunes. The screen (and buttons) started working. Best of luck everyone. It isn't for the faint of heart..
for cable 3 - there is a little white tab across the end of the thing that holds the cable - this can be flicked up which allows the cable 3 to slide in better - then you click the white tab down again to hold it in place
@zimtower - sorry about that... on my iphone the little flap is white. Several others have posted similar advice, so possibly something else was amiss or you have a newer version than I did! Again I hope your phone isn't totalled!
hi guys, ive just replaced my iPhone housing, ive got my phone all back together with the display working and everything. The only thing that isnt working is the home button, if someone has any advice on why it doesnt work could they message me? I didnt take apart the screen at all, just changed the housing. Any help would be much appreciated
Would anyone happen to know why only one part of my touch screen wouldn't work on my 3gs after replacing the LCD? The screen looks normal but one strip about half an inch all the way down the right side doesn't work.
2:28, im having a lot of problems with getting the power switch sturdy. whenever i screw it in, it doesn't stick out, it just kinda goes in. any advice would be very much appreciated!!!
@myzip it goes in at an angle and it doesnt go all the way in it stick a very small amount out and see if your i phone works. if not retry putting the cables back in
@myzip no it isnt a problem, try hard ware reseting it (hold power and home button till apple sign shows up and let go and see if it works) or just try to restore and see what happens
@myzip sorry for answering so late why dont you open it up again an remove the vibrator and put it back in (tighter) and theres a little tab at the end of the vibrator with metal pins and take that tab and push it up a little because it might not be contacting the motherboard and get the message. and make sure you tie down the mother board correctly
@myzip oh sorry your talk about the proximity sensor sorry i forget haha umm well i dont know what to say. it might be the adhesive that is blocking it or something. idk
It's true hear Apple shut down the leaked iPhone and they were'nt able turn it on
Most of you people Reading this comment simply can't buy the iPhone 4g, since it will be close to $500
But I learned on the Apple FB Fan Page earlier they are giving away a few thousand iPhone 4gs. Also, this is the link to their contest site ... just copy and paste
i installed a new battery and i got a flashing black screen. i thought i jacked something up like not connecting one of the connectors, but then i disassembled it, put the old battery back in, reassembled it and everything was back to normal. any thoughts?
i just reasembled my iphone 3g and it does not charge...it shows the low battery sign on screen and I put in my charger and it does not charge...can you help me?
@darkboarder297 you have to slide it into the socket which is quite tricky and then clip it by pressing down the small white or grey switch or tab or watevar u wanna call it
so i disassembled the iphone 3g and assembled it back together just to look inside. i made sure all the connectors were back in place.
now i can't turn on my phone. when i plug it into the wall charger, the apple logo appears for 2 seconds and then turns off. i tried to do a hard reset and it shows the "connect to itunes" logo and it stays there. the problem is when i disconnect the usb, the phone shuts off.
I plugged the phone into my laptop, but it won't start up either! help!!!
@MarranaPOTM slide the ribbon in under the black connection with the white flap making sure the white flap is still 45 degrees upward then when you can see the cable push the white flap back down, use a small flat head screwdriver if you cant reach the flap with your fingers
Hey i dis assemble my iphone and then put it back together and now when im making i can not hear anything till i put it in speaker any help with that would really appreciated
@xDavidr27x dissasemble again chech all ribbon cable connections are on firmly and perfectly, i use the fitting tool to push the connections together for reassurance
i need help on my 3g, i replaced the back cover, i put everything together, the phone is back on but the home button is not working at all. i don't know what i did wrong.
Don't buy from this company it's a scam!! I bought a lens for my blackberry and they never sent it!! They are in Hong Kong and took my money via paypal and never sent the lens!! And there is no way to get in touch with them!!! The number they post to call is a recording that just talks Chinese!!
Don't buy from this company it's a scam!! I bought a lens for my blackberry and they never sent it!! They are in Hong Kong and took my money via paypal and never sent the lens!! And there is no way to get in touch with them!!! The number they post to call is a recording that just talks Chinese!!
Don't buy from this company it's a scam!! I bought a lens for my blackberry and they never sent it!! They are in Hong Kong and took my money via paypal and never sent the lens!! And there is no way to get in touch with them!!! The number they post to call is a recording that just talks Chinese!!
Don't buy from this company it's a scam!! I bought a lens for my blackberry and they never sent it!! They are in Hong Kong and took my money via paypal and never sent the lens!! And there is no way to get in touch with them!!! The number they post to call is a recording that just talks Chinese!!
When the screen is by itself, it has that digitizer thing on it. Can that be removed from the glass if I were to get a new glass? Or do I have to get a new glass that comes with the digitizer thing.
I just opened my iPhone 3g in order to see if I could fix the mute button and I didn't mess with anything else. Cables 3, 2 and 1 are (or seem) well connected.
Now the iPhone doesn't turn on. Any ideas as to what may be wrong?
trust me dont mess with the #6 cable because i have took apart and reassembled many iphones and one time i decided to check out #6 and i broke it nearly even attempting to remove it,so my advice to you is don't do it. it is responsible for wifi connections and service reception i believe.
It helped me out...just fixed my 16G 3GS iphone. After dropping it into a cup of water, I thought my phone was done. I pulled it apart, not knowing what I was doing, but just wanting to dry it out. When I put it back together, everything worked, but the touch screen/digitizer. So I had my phone sitting in my room for the last 3 weeks, until this morning...I watched a couple videos and this one helped me realize I hadn't reassembled it correctly...LOL :)
And I'm stuck with Error (23) When restoring with White screen on my iPhone
MrDjChris1 6 hours ago
I'm stuck with apple logo, when pluggin it in then turns off. :\ What's happening?
MrDjChris1 7 hours ago
Can someone please tell me how to put ribbon 3 in
dassi95 4 days ago
hey can i ask if overcharging of iphone will spoil?
blueBerRyShanIce 3 weeks ago
what is that screw driver called? where did you get it?
krazyboy12001 1 month ago
@krazyboy12001 It's a Phillips screwdriver and if don't have one you can purchase it on our website cnn.cn ;)
wwwcnncn 1 month ago
I did everything but now my touchpad doesn't work help?
PadronReality 2 months ago
i opened my iphone because my headphone jack wasnt working, i fixed it and put it back together but then parts of the screen, the touch wasnt working. i opened it to see what was wrong and couldnt figure it out. so i just closed it back and now i try to turn it on , i just get a white blank screen. anyone know what wrong? ( i dont think i connected cable 3 but it still turned on)
redwings690 2 months ago
thank you for this video. i opened up my iphone to replace the home button... repairing actually, and i kind of blurred on actual step to re assemble the phone. thanks thanks and thanks!
fieznur81 2 months ago
@fieznur81 You're welcome :)
wwwcnncn 2 months ago
can you tell me how to re install the gps antenna ?
DJGoldNF 3 months ago
@MultiMixedMedia hope u got number 3 in. U have to push the Clip up at 45 degrees and hold the screen and slide it in. U don't have to slide a great deal in as mot all is suppose to slot in. Then close the clip shut which wedges it in.
MrMagsimus 3 months ago
I FUCKING CANT GET THE 3RD ONE IN!!! IVE BEEN TRYING FOR LIKE 2 HOURS!!!!!!
MultiMixedMedia 3 months ago
Nice video - but I was looking to see how ribbon 3 was put in - thought it was from the bottom, but thanks to a commenter I see it's from the top. Nice tutorial - would have preferred close up on Ribbons 3, 2, 1 though. But thank you.
fivekitten 4 months ago
Oh this is a really great video. Help a lot. Thanks! :D
zharfan1997 4 months ago
which type of glue is round the edge of he chrome bezel / screen (a black substance)
funkydiscossco 4 months ago
I followed every step but my Iphone still not working!
I just disassemble it trying to replace the back cover, what can I do?
please help me!
nieet 5 months ago
how that power button should go in?
MasaTheSlayer 5 months ago
Is the screen display supposed to have a seal because I'm trying to pry it out but it's stuck? And if I do take it out am I supposed to have a back up seal for the screen if there is any/
larrynsett 5 months ago
does the new screen come with that "rubber thing" between the screen and the body itself?
gega24 5 months ago
@gega24 No, sadly it does not. I got a white replacement and am hoping to figure out how to change it over to a white rubber piece. This piece is also very easy to damage while changing the digitizer.
matthewmaville 1 month ago
This has been flagged as spam show
Order my cheap guide on iPhone repair and fix ANYTHING that goes wrong with your iPhone, Moneyback Guarantee ! NOT a scam ! Just check out my channel for the link :)
emilaya101 7 months ago
the bottom white portion of the #3 plug must be pried up into a 45 degree orientation..then slide the ribbon in from the top then push the white part back down til it sits flush with the rest of #3 plug. Then the #3 ribbon is "locked" in...not that hard...just this vid doesn't show it very well
dirkah68 7 months ago
the bottom white portion of the #3 plug must be pried up into a 45 degree orientation..then slide the ribbon in from the top then push the white part back down til it sits flush with the rest of #3 plug...not that hard...just this vid doesn't show it very well
dirkah68 7 months ago
@dirkah68 Thank you! That's the information I was looking for!
fivekitten 4 months ago
This has been flagged as spam show
me too!!! i watch the fuul video just to see that!! how i'm supose to connect number 3???
lucresio10 8 months ago
me too!!! i watch the fuul video just to see that!! how i'm supose to connect number 3???
lucresio10 8 months ago
@lucresio10 Step 1) Unlock the black latch (it opens up like a hinge). Step 2) Insert the Cable 3 (Note: You will still see the golden contacts of the cable even when the cable is fully inserted). Step 3) Now close the latch by turning it down.
cwd90 8 months ago
This has been flagged as spam show
cable number 3 i cant put in because is too small ,,, how can u put in it .. i know where it going ..
xOxSahonyy 8 months ago
cable number i cant put in because is too small ,,, how can u put in it .. i know where it going ..
xOxSahonyy 8 months ago
Yeh cable 3 can be a pain in the ass!!!!
RVH253 8 months ago 6
cable 3
trukc56 8 months ago
for cable three push the cable into the white slot then slide the switch down.
TheBandlt 9 months ago
HOW DO YOU GET IN CABLE THREE PLEASE?! help?
Racine2003 9 months ago
my iphone wont work ithink it dont power or no display please help me!!!!
MultiXXXKING 9 months ago
HOW CAN I GET CABLE 1 IN!?!?!?!?!?! everything else is easy but number 1!!!!!!!!!!!!!!!
i think it goes in but the screen doesn't turn on and it will easily come back out so i don't think i'm doing it right! does any one have some tips for me i really need to get it in!!
206robert206 9 months ago
alright i have done that but after the replacement the screen stays black unless i turn it on but then it goes white for a few seconds and then back to black
razmania1000 9 months ago
alright i have done that but after the replacement the screen stays black unless i turn it on but then it goes white for a few seconds and then back to black
razmania1000 9 months ago
OMG cable 3 wont go back innnnn!!!!!!!! ahhhhhhhhhhh please help! My iphone isnt even turning back on now!!!!!!
MsPrincessAlia 9 months ago
@MsPrincessAlia use a small tool to slide cable in, and close that little black switch. hope that helps
kingkongwong007 9 months ago
can u help me plz? my iphone 3g was havn this problem, wen u press down hard on the top part of the screen, it goes white, then u have to tap the back for it to go back 2 normal. so i ordered parts to open it up but when i did i didnt no u had to open it from the bottom 1st and i pull straight up and ripped up all the cables. i did notice that the thing hold connector 3 in wasnt pressed down. i put all cables bak like u said and i dont see anything on my screen. i can still hear it. plz help....
jamiedadawg 9 months ago
thanks men, apple store is a shit, they told me my iphone was totailed, i opened it and the cable 4 was disconected
diegogarciar 10 months ago
Ok I had the exact problem after I replaced my iPhone's housing. I knew that I had done everthing perfectly because iTunes still recognized my phone when I plugged it in. This is what I did: I held the Power and Home buttons simultaniously and Tadah!! I saw the apple logo and then the phone started up normally. I hope this helps. :D Though I hope you've gotten your phone to work by now I just wanted to share with everyone else who might have the same problem
Robinpal001 10 months ago
I put it back everything work fine but my wifi has a weak signal help plz.
um556677 10 months ago
Comment removed
um556677 10 months ago
took me 1 hour... thank you.. i was starting to doubt myself
SSJ4G0KU 10 months ago
Comment removed
schiffer2003 10 months ago
I opened mine and can't put it back together.
SportsGamerMan 10 months ago
i opened mine and put it back together, now my screen or buttons arent working... if i plug it in to my computer, it makes the connection sound, and is connected, but my screen doesnt show anything
Gannondalf 11 months ago
@Gannondalf ::Ok I had the exact problem after I replaced my iPhone's housing. I knew that I had done everthing perfectly because iTunes still recognized my phone when I plugged it in. This is what I did: I held the Power and Home buttons simultaniously and Tadah!! I saw the apple logo and then the phone started up normally. I hope this helps. :D Though I hope you've gotten your phone to work by now I just wanted to share with everyone else who might have the same problem ;D
flexdex2 10 months ago
@flexdex2 i woke up the day after this and my screen was working again, but my home button wasnt... i couldnt get it to work. so i just bought a new phone :D
Gannondalf 10 months ago
@Gannondalf dfu mode
oglapras 2 months ago
i opened it dusted everything out, and put it back together, but now it wont turn on, please help me:(
chunkyness09 11 months ago
whats cable 6 for ?
playasonline 11 months ago
One of the screws took me an hour for some reason...
NewbPro 11 months ago
Hi. A few months ago I bought and replaced my iphone's digitazer. It worked ok, then the LCD went gray, I thought it was a matter of replacing it aswell sou I did that. Problem is the new one also appears gray all the time. What should I do now. Please help!
daedaarstad 11 months ago
@daedaarstad Maybe is the digitalizer or a bad cable connector
davidethernal 11 months ago
@daedaarstad are you sure you used the correct digitizer? theres one for 3g and one for 3gs
MrAbkio 10 months ago
MISOPHONES●COM
UNLOCK YOUR iPhone #FTW
unlock4all 11 months ago
When putting cable 3 in flip the plastic part at the opposite end of the connector up. That opens the connector. Then it is easy to slide the ribbon cable in. Then push the plastic switch down.
jerryh8391 1 year ago
i spent 2 hours on cable 3.
iamjamesson 1 year ago
can i don't switch the iphone when repairing
galaxymode 1 year ago
Comment removed
Louise2791 1 year ago
This has been flagged as spam show
Check this video out: youtube.com/watch?v=8zozVcWrbBY&feature=related .. for how to connect cable 1, 2 and 3 :D
Louise2791 1 year ago
Comment removed
Louise2791 1 year ago
Btw this is not the owner of this YouTube account so do not hate on This account
cutepanda96 1 year ago
Worst video ever made, did not help me ONE BIT ! Jus Wanted To Let You Kno.
cutepanda96 1 year ago
My Sleep/Wake button doesnt function properly after i screw it in. When i press it, it just stays down and I cant hear or feel the button "click". Please someone help me :(
lunbaba14 1 year ago
how do you know if #3 is all the way in yet???
lexiedarnell 1 year ago
I Think I Fucked Up My Iphone Cause Of You
cba0396 1 year ago
OMG! Helped so muchh thank you.
PuurpleHazexD 1 year ago
Comment removed
cba0396 1 year ago
connected cable 1, 2 ad 3 and neither my home button or power button turn the screen on? any ideas?
CaTcHaFiShBiTcH 1 year ago
@CaTcHaFiShBiTcH Im having the same problem have you fixed yours yet ? If so please help me because im Screwed If i have fucced this phone up !
iamperialent 1 year ago
This has been flagged as spam show
@iamperialent Yes, hold the home button for 5 seconds, it must reset its new default wires, it cant just be placed in and ready to go.
Jakzv 1 year ago
@CaTcHaFiShBiTcH Yes, hold the home button for 5 seconds, it must reset its new default wires, it cant just be placed in and ready to go.
Jakzv 1 year ago
@CaTcHaFiShBiTcH ; I had the same problem. For Cable #3, there was a white line across the connector, I slid the cable in to the port until this white line was even with the end of the mainboard. Once I did this, I noticed that the mute slider would vibrate when toggled on/off. So, the phone had to be 'on'. I connected the phone to my computer and did a restore within iTunes. The screen (and buttons) started working. Best of luck everyone. It isn't for the faint of heart..
e34d 1 year ago
for cable 3 - there is a little white tab across the end of the thing that holds the cable - this can be flicked up which allows the cable 3 to slide in better - then you click the white tab down again to hold it in place
markwebley 1 year ago 12
@markwebley Thanks that helped a lot ! It worked ! :D I freaking hate cable 3 !!! :@@@
GODLOVEEESYOU 1 year ago
Comment removed
zimtower 3 months ago
@markwebley Ty, it's actually the black part that gets flipped up. Your advice just broke half of my connector.
zimtower 3 months ago
@zimtower - sorry about that... on my iphone the little flap is white. Several others have posted similar advice, so possibly something else was amiss or you have a newer version than I did! Again I hope your phone isn't totalled!
markwebley 3 months ago
did it turn on?
serg4nyc 1 year ago
All i get is the apple logo after assembly!!?? WTF??
hannyboy2006 1 year ago
This has been flagged as spam show
how do u connect cable 3 its driving me insane
EliasIngea 1 year ago
how do u connect cable 3 its driving me insane
EliasIngea 1 year ago
Where do you connect cable 3?
ashchugani 1 year ago 20
all screws in iphone are similar???
ALEXHOLEAHAVA 1 year ago
Nice tripod
Adrian51524 1 year ago
hi guys, ive just replaced my iPhone housing, ive got my phone all back together with the display working and everything. The only thing that isnt working is the home button, if someone has any advice on why it doesnt work could they message me? I didnt take apart the screen at all, just changed the housing. Any help would be much appreciated
aproctor14 1 year ago
@aproctor14 you probaly havnt got the cable inserted properly take it apart again and put bak to gether should work
adamhenders 1 year ago
This has been flagged as spam show
Why don't you ever reply?
Treylb3 1 year ago
Does it matter which screw goes where on the motherboard?
Treylb3 1 year ago
iphonepartsfactory
herosunfun 1 year ago
great
herosunfun 1 year ago
Please does anyone know if this was easy that I'm able to do it by my self or is it to risky and I need to take it to someone
hazel7nut7 1 year ago
which position is the chrome loop on the power button supposed to go. down against the back of the case or upward?
TJzachary 1 year ago
connetion 3 is a pain any tips
gone556 1 year ago 2
@myzip just update to 4.1 it should help with the proximity sensor.
dipodhelper 1 year ago
does this reset the iPhone if you disconnect the wires?
dankanichivan 1 year ago
Would anyone happen to know why only one part of my touch screen wouldn't work on my 3gs after replacing the LCD? The screen looks normal but one strip about half an inch all the way down the right side doesn't work.
feltd89 1 year ago
thank you-good job
lad2y 1 year ago
the bestest thanks
ufacebookd 1 year ago
UGh, they sent me a broken chrome bezel =/
taps13118 1 year ago
omg i broke my iphone you own to my 500$
tolis11p 1 year ago
@tolis11p haha
123456789dri 1 year ago
why is it so hard to find a proper assembly video?
stevecr223 1 year ago 3
what would happen if you damaged ribbon cable labeled number 3
@superman8299
Superman8299 1 year ago
@Superman8299 then the system wont understand the touch screen anymore
dipodhelper 1 year ago
Is it hard? I just bought an iphone that is put together without screws and i bought screws.
zwbreeding 1 year ago
I did everything when i switched out my back but the only problem i have is my home button wont work. ideas?
noraakcuf 1 year ago
2:28, im having a lot of problems with getting the power switch sturdy. whenever i screw it in, it doesn't stick out, it just kinda goes in. any advice would be very much appreciated!!!
gripetthrashet65 1 year ago
thanks
Fl0wersInTheWind0w 1 year ago
How do you install the home button?
evilwarriorx 1 year ago
cable 3!!!!! impossibol!!!!!!!
myzip 1 year ago 31
@myzip it goes in at an angle and it doesnt go all the way in it stick a very small amount out and see if your i phone works. if not retry putting the cables back in
dipodhelper 1 year ago
@dipodhelper th man my pohon is ilve, only now after the 4.0.1 software called sensor no longer works :( ios4.0.1 problems?
myzip 1 year ago
@myzip your proximity sensor?
dipodhelper 1 year ago
@dipodhelper yes the sensor!! the problem in ios4.0.1??
myzip 1 year ago
@myzip no it isnt a problem, try hard ware reseting it (hold power and home button till apple sign shows up and let go and see if it works) or just try to restore and see what happens
dipodhelper 1 year ago
@dipodhelper nothing :(
myzip 1 year ago
@myzip sorry for answering so late why dont you open it up again an remove the vibrator and put it back in (tighter) and theres a little tab at the end of the vibrator with metal pins and take that tab and push it up a little because it might not be contacting the motherboard and get the message. and make sure you tie down the mother board correctly
dipodhelper 1 year ago
@dipodhelper I'm afraid to break everything ... but then a contact connected evil that does not work the proximity sensor?
myzip 1 year ago
@myzip oh sorry your talk about the proximity sensor sorry i forget haha umm well i dont know what to say. it might be the adhesive that is blocking it or something. idk
dipodhelper 1 year ago
@myzip
lol i tought so too but it's possible
just need to hold with your finger cable number 1 and numer 2 and slide slowly the cable into the chip and close the clips
it was hard in the first time and took me alot of tries but now i can do it in one try
Elioz 11 months ago
@myzip you have to incert it in like a hole that its between 2 bars
diegogarciar 10 months ago
@myzip lol wow i think cable 3 is the easiest i just use the screen to move it into place
basically what i imagine is me navigating my dick to my girl and it works, learn ppl learn
ms13goku 9 months ago
@ms13goku Really you could have left this idiotic comment out
jpainttn1 8 months ago
This has been flagged as spam show
@jpainttn1 u know what
stfu noob for having to look this up nigger fag
ms13goku 7 months ago
when putting the ribbons back in you have to do it in reverse order ie3 then 2 then 1
KYZA699 1 year ago
Thanks mate! Great guide!!!!:)
ElephantHannibal 1 year ago
@DarkSmart570
It's true hear Apple shut down the leaked iPhone and they were'nt able turn it on
Most of you people Reading this comment simply can't buy the iPhone 4g, since it will be close to $500
But I learned on the Apple FB Fan Page earlier they are giving away a few thousand iPhone 4gs. Also, this is the link to their contest site ... just copy and paste
shortener｡org/67192
Use this code on page 2 FACEBOOK8966
MrsBunnies1990 1 year ago
@MrsBunnies1990
I got mine before the release date!
thunderbirdlver 1 year ago
Comment removed
Marc0175 1 year ago
@Marc0175 dont use the lords name in vain
Tmac631 1 year ago
@Tmac631 sry, im from german and translated a litle bit wrong,
it shoud be oh my gosh ^^
Marc0175 1 year ago
This has been flagged as spam show
@Marc0175 dont used the lords name in vain
Tmac631 1 year ago
Hello! I disassembly my iPhone 3G e change the back cover and when I assemblyed it i could to make it start.
Just appear the logo Apple screen and restart, restart, restart...
I put in DFU mode and tried to restore in iTunes, it restore good, but when was start, stay in the logo Apple Screen again.
Do you have any ideia?
filipedeporte 1 year ago
OMG it took you 6 seconds to place 3,2,1 back in place...
IT HAS TAKEN ME AN HOUR!!!!
OMG PLZ HELP
PSPISOGAME 1 year ago
My motherboard doesn't seem to fit in properly. Can anyone help me?
kooldood213 1 year ago
@kooldood213 give me her number and i'll make sure it will fit in her nice and tight baby
Bahzad23 1 year ago
my home button doesnt work and the power button is hard to press. any ideas?
xpt2613 1 year ago
i installed a new battery and i got a flashing black screen. i thought i jacked something up like not connecting one of the connectors, but then i disassembled it, put the old battery back in, reassembled it and everything was back to normal. any thoughts?
secondbest21 1 year ago
i cant get cable #1 to stick in any tips?
GettOnMyLevel 1 year ago
@GettOnMyLevel i have the exact same problem.... anyone got any ideas? please?
stefanolsgaard 1 year ago
i just reasembled my iphone 3g and it does not charge...it shows the low battery sign on screen and I put in my charger and it does not charge...can you help me?
lakesh8602 1 year ago
i cannot get cable number 3 to connect how do i do it?
darkboarder297 1 year ago
@darkboarder297 same thing happened to me , you just have to be patient and keep trying
shuaibA0 1 year ago
@darkboarder297 sameeeee :(
arahirst 1 year ago
@darkboarder297 you have to slide it into the socket which is quite tricky and then clip it by pressing down the small white or grey switch or tab or watevar u wanna call it
stefanolsgaard 1 year ago
so i disassembled the iphone 3g and assembled it back together just to look inside. i made sure all the connectors were back in place.
now i can't turn on my phone. when i plug it into the wall charger, the apple logo appears for 2 seconds and then turns off. i tried to do a hard reset and it shows the "connect to itunes" logo and it stays there. the problem is when i disconnect the usb, the phone shuts off.
I plugged the phone into my laptop, but it won't start up either! help!!!
viethomeboiii 1 year ago
@viethomeboiii the same thing happen to me anyway that u got it to work back?
Hitler193 1 year ago
@viethomeboiii put it into DFU mode
try that.
tunakolon 1 year ago
how can i connect the
third one? :(
MarranaPOTM 1 year ago
@MarranaPOTM slide the ribbon in under the black connection with the white flap making sure the white flap is still 45 degrees upward then when you can see the cable push the white flap back down, use a small flat head screwdriver if you cant reach the flap with your fingers
lilvfr400boy 1 year ago
what if that white parts broken is there anything you suggest that i could use to replace that flap
cjerts3232 1 year ago
@cjerts3232 you can get some acetate paper cut a very thin strip and push it in with the ribbon, tape it in place and done
lilvfr400boy 1 year ago
thnks man
cjerts3232 1 year ago
Hey i dis assemble my iphone and then put it back together and now when im making i can not hear anything till i put it in speaker any help with that would really appreciated
xDavidr27x 1 year ago
@xDavidr27x dissasemble again chech all ribbon cable connections are on firmly and perfectly, i use the fitting tool to push the connections together for reassurance
lilvfr400boy 1 year ago
@xDavidr27x you havent connected the glass , digitizer ribbons properly
shuaibA0 1 year ago
i need help on my 3g, i replaced the back cover, i put everything together, the phone is back on but the home button is not working at all. i don't know what i did wrong.
Hashim60070 1 year ago
i cant get cable 3 in all the way any help?
christian571 1 year ago
where do you find a screw driver that small?
bayman99 2 years ago
Ebay, for like 3 dollars.
bkyoungboy1 2 years ago
This has been flagged as spam show
Don't buy from this company it's a scam!! I bought a lens for my blackberry and they never sent it!! They are in Hong Kong and took my money via paypal and never sent the lens!! And there is no way to get in touch with them!!! The number they post to call is a recording that just talks Chinese!!
netnetlove 2 years ago
This has been flagged as spam show
Don't buy from this company it's a scam!! I bought a lens for my blackberry and they never sent it!! They are in Hong Kong and took my money via paypal and never sent the lens!! And there is no way to get in touch with them!!! The number they post to call is a recording that just talks Chinese!!
netnetlove 2 years ago
This has been flagged as spam show
Don't buy from this company it's a scam!! I bought a lens for my blackberry and they never sent it!! They are in Hong Kong and took my money via paypal and never sent the lens!! And there is no way to get in touch with them!!! The number they post to call is a recording that just talks Chinese!!
netnetlove 2 years ago
Don't buy from this company it's a scam!! I bought a lens for my blackberry and they never sent it!! They are in Hong Kong and took my money via paypal and never sent the lens!! And there is no way to get in touch with them!!! The number they post to call is a recording that just talks Chinese!!
netnetlove 2 years ago
@netnetlove just claim back through paypal, happens a lot with all the chinese and hong kong sellers
lilvfr400boy 1 year ago
I scratched my camera, is that the housing or the actual lens?
kenneff 2 years ago
When the screen is by itself, it has that digitizer thing on it. Can that be removed from the glass if I were to get a new glass? Or do I have to get a new glass that comes with the digitizer thing.
RKhatkar34 2 years ago
You can get and change the glass by itself.
ringrocker1987 2 years ago
I just opened my iPhone 3g in order to see if I could fix the mute button and I didn't mess with anything else. Cables 3, 2 and 1 are (or seem) well connected.
Now the iPhone doesn't turn on. Any ideas as to what may be wrong?
fastcharlie 2 years ago
any help with cable #3? i can't slide it in all the way.
donovanknifeman 2 years ago
Where is the #6 cable connected too? Can't find it anywhere and need to buy one (checked on ebay)
soviet1942 2 years ago
trust me dont mess with the #6 cable because i have took apart and reassembled many iphones and one time i decided to check out #6 and i broke it nearly even attempting to remove it,so my advice to you is don't do it. it is responsible for wifi connections and service reception i believe.
818arthur 2 years ago
Now start it up!
MimPagga 2 years ago
my touchscreen is half- dead xD
i can turn my phone off but i cant slide to unlock.. do you know whats the problem here? do i have to buy a new screen or so? ^^
so i tried to assemble my iphone but i can barely plug back in the 3rd connector?
it has a white stripe on it, so do you have to plug it in till the white stripe or not? =D
strever5 2 years ago
It helped me out...just fixed my 16G 3GS iphone. After dropping it into a cup of water, I thought my phone was done. I pulled it apart, not knowing what I was doing, but just wanting to dry it out. When I put it back together, everything worked, but the touch screen/digitizer. So I had my phone sitting in my room for the last 3 weeks, until this morning...I watched a couple videos and this one helped me realize I hadn't reassembled it correctly...LOL :)
sanchb 2 years ago