@rc1231589 - Yes very true - But this is a very cool motor. It has a small oil pump on the side that pumps oil into the cylinder every time it fires. Its just enough to smoke just a little as if you was running a liquid 2 cycle mix . I will do a video on this. Look at my new project using this moped....
IT LOOKS LIKE THIS WOULD PRACTICAL FOR A CONSTANT RPM AND ADJUSTED OUT FOR MAXIMUM EFFICIENCY. THUS AN AXIAL FLUX ALTERNATOR TO CHARGE BATTERIES AND REDIRECTED TO AN ELECTRIC DC DRIVE SYSTEM. A STEP DOWN GEARING WOULD BE NEEDED FOR THE ALTERNATOR AND ALSO THE DRIVE. ELECTRIC MOTORS USUALLY HAVE THE SAME TORQUE THROUGHOUT THE RPM RANGE. THE TORQUE NEEDED TO RUN THE PMA WOULD CHANGE WITH THE CHANGE IN LOAD. SO YOU WOULD HERE THE RPMs DROP WHEN THE BATTERYS' CHARGE IS LOW.
I've seen videos where people are heating the fermented mash to 160 degrees and powering lawn mowers and generators with the fumes. It's called a vapor carb. Plenty of Youtube videos on vapor carb, but I'd like to see one here using mash. Heated mash...
@balls2yourface . ??? think \cool engine. how about a small geet as well.(REAL COOL CYLINDER) lot of two strokes have a separate twostroke pump any way.. come on man thought this was a party?
you can fix that with Steel wool it works wonders just stuff it in the air line somewhere and the flame won't go past that point...i made a gas vapor flame thrower and it has never had troubles
Just a question, if as I assume that's a 2 stroke engine, than together whit the water and the gasoline , do you add also the oil in the vaporizer? and if so , is there enough oil percentage in the vaporized mixture to lubricate the engine ???
In any case nice project and keep up the good work
I'll chime in with the others... without oil injection, it will die
rc1231589 9 months ago
@rc1231589 - Yes very true - But this is a very cool motor. It has a small oil pump on the side that pumps oil into the cylinder every time it fires. Its just enough to smoke just a little as if you was running a liquid 2 cycle mix . I will do a video on this. Look at my new project using this moped....
Crazy Fish Farmer
tsimonin 9 months ago
2 stroke on gas vapour ???????? lol
Gauthier808 9 months ago
do you really think that can has to be that big?
crafter2u 9 months ago
IT LOOKS LIKE THIS WOULD PRACTICAL FOR A CONSTANT RPM AND ADJUSTED OUT FOR MAXIMUM EFFICIENCY. THUS AN AXIAL FLUX ALTERNATOR TO CHARGE BATTERIES AND REDIRECTED TO AN ELECTRIC DC DRIVE SYSTEM. A STEP DOWN GEARING WOULD BE NEEDED FOR THE ALTERNATOR AND ALSO THE DRIVE. ELECTRIC MOTORS USUALLY HAVE THE SAME TORQUE THROUGHOUT THE RPM RANGE. THE TORQUE NEEDED TO RUN THE PMA WOULD CHANGE WITH THE CHANGE IN LOAD. SO YOU WOULD HERE THE RPMs DROP WHEN THE BATTERYS' CHARGE IS LOW.
MUDDy
muddymuddymuddmann 11 months ago
I've seen videos where people are heating the fermented mash to 160 degrees and powering lawn mowers and generators with the fumes. It's called a vapor carb. Plenty of Youtube videos on vapor carb, but I'd like to see one here using mash. Heated mash...
saintveil 1 year ago
and how do you plan to keep a two stroke lubricated running on vapours?
balls2yourface 1 year ago 10
@balls2yourface . ??? think \cool engine. how about a small geet as well.(REAL COOL CYLINDER) lot of two strokes have a separate twostroke pump any way.. come on man thought this was a party?
neiallswheel 11 months ago
get onte train
torino351ful 1 year ago
how about hooking it up and riding it on the streets?
sc2dave 1 year ago
darn i just sold my tomos mopeds. now i want to try this
aksgamewiz 1 year ago
So... its a bong full of fuel attached to an engine?
XFolf 1 year ago
How the hell did you get Tomos motor in US ? :D
sinisasokolovic 1 year ago
@sinisasokolovic jbt, baš i ja gledam :)
Chavka24 11 months ago
stop being a scrooge and just buy som petrol / gas
superbran2008 1 year ago
no clutch?
MrPoopshoe 1 year ago
a device that does everything a carburetor can do, but poorly.
brandonmoped 2 years ago
@brandonmoped
and doubles the gas mileage... yup...
CrazyFishFarmer 2 years ago
impressive ,it is the first time i see on a scooter
1984georgel 2 years ago
You are a Crazy-Smart Dude! Good stuff!
klhudson1957 2 years ago
lol
icbm235 2 years ago
not a two stroke is it?
coolio8444 2 years ago
looks nice, how about backfire ?
mcz1987 3 years ago
you can fix that with Steel wool it works wonders just stuff it in the air line somewhere and the flame won't go past that point...i made a gas vapor flame thrower and it has never had troubles
Magganrchy 2 years ago
thanks, i read something about it in hho projects.
mcz1987 2 years ago
DRIVE IT
swabbster3 3 years ago
Nice job.
Just a question, if as I assume that's a 2 stroke engine, than together whit the water and the gasoline , do you add also the oil in the vaporizer? and if so , is there enough oil percentage in the vaporized mixture to lubricate the engine ???
In any case nice project and keep up the good work
Cheers
Andrea
AndreaGanora 3 years ago
Your rite, If it's two cycle with no oil in the fuel the engine will lock up!
And that wouldn't be good! :P
roboman79 2 years ago
nice work
jonny8943 3 years ago
thats badass
wesbizket 3 years ago
Excellent work!
Fusion8r 3 years ago