Det är när man öppnar ljuddämparen till en viss yta i jämförelse mot vad original ytan är i cylindern tex 200mm2 så ska det vara 80% av den ytan för att den ska gå med ett visst mottryck. och det motrycket motsvarar 80% av avgasports ytan mot kolven. Det gör att motorn andas lättare och då kan den varva mer och i sin tur ändra hur fort du sågar med några sekunder. Men du kan nog åka på att ta bort plast stoppen som sitter på förgasaren för att kunna ge den mer bensin.
@silfverbielke ja du kan ju säkert det då. då du verkar vara i moped ålder så skaffa dig en såg. nu är det så att jag sågar motorsåg/röjer professionellt. Så jag vet att en vass kedja är mycket viktigare än en vass motor men om man har båda så har man ju alla fördelar. Se så är den en gammal video. och vi hade jobbat så det var paus underhållning.
@silfverbielke joo men då är vi överens. jag vet inte, kan du fila så är det väll bättre för dig. Men jag tycker nog att det är lite schizofren att säga lär dig fila när det är tre stycken som sågar. det är tre olika filare så jag fattar inte. Men jag antog att du eftersom du på lin kanal visserligen, skriver att du är sexton år så antog jag att du inte har jättelång erfarenhet. Och därmed försöker att hävda dig på internet. Men jag får väll säga lycka till med sågningen och ha en bra veka. Mvh
@Filasogen Får väll lägga upp en liten film från våran ved produktion -11, 170 m3, egen byggd skogsvagn, mm. ålder spelar ingen roll mannen ! därimot kunskap, Erfarenhet kan vara dålig, inte enbart bra...
jaha, jag ids inte bry mig. 170m3 är ungefär en 20timmars jobb vid en vedmaskin. jaha nå vet jag int om det är lönt och tjafsa om hur dan du är jag tycker bara att "lär dej och fila istället" är en så in i fitton dum kommentar.
the comparisson is not concludent: the saws are from different classes(260 should be compared with 346xp), the chains are not new and probably not sharpen and they should be of the same type and manufacturer, the gas and mix oil should be the same, and the saws should be as new as possible. by the way ... stihls are more expensive here in romania. the average difference is around 50-100euros.
@ctgabi Okay, ctabi thank you for the information. And i know that the saws are not comparable to etch other. But it was a funny video. One thing i think its weird is that the Stihl is more expensive in Romania than here, but i suppose that's because of Husqvarna have its home market here.
the price difference is not that big in romania.it s around 10-20 euros the most between saws from the same class.the thing there,i believe is that the saws have almost the same power and the difference is made by the chains.that husqvarna cuts a lot faster than the stihl normaly,stihl are a lot lazier.by the way,that 260 is ported?
@TheDraganflorin No the 353 is not faster by any means. The 260 is more copareble to 346. But the chains did make a big difference. The Stihl is not ported yet. but when the warranty ran out i will port it, but it is in fact muffler moded. . My 260 revs more now then it did there abut 15000rpm.
the price difference is not that big in romania.it s around 10-20 euros the most between saws from the same class.the thing there,i believe is that the saws have almost the same power and the difference is made by the chains.that husqvarna cuts a lot faster than the stihl normaly,stihl are a lot lazier.by the way,that 260 is ported?even my 435 cuts faster than the 353
Is a German Stihl really cheaper in Sweden than a same class Husqvarna? I mean Husky is made in Sweden. And I never get the reason why Husqvarna is 50% cheaper in the USA than in west-Europe.
Yeah I have a 353 e-tech on Aspen, never problems with it, air filter keeps very clean, easy start. Off course new chains and a blade sometimes.
I've never had a Stihl saw, but I've seen a lot of them broken with damaged pistons in dealer's workshops, their air intake sucks dust, they have only made that better a few years ago.
pretty much so. my stihl was brand new and the huskvarna is not old but driven much more then my stihl and the partner is 6yrs old but i think that the air cleaning is better on the huskvarna but the stihl is cheaper and fast, lighter but more fragile. but the are all god saws in different classes.
husqvarna is 10 times better than a stihl, saw, in my opinion it husky means, technology, better relation weight/ power and versatility. All my votes for husqvarna.
I like stihl the most but its no wrong whit husqvarna, but i think they are to expensive and don't give the right weight/ power for the money. but that's my opinion and you have yours.
How much you will save time by buying Stihl than repairing your Husqvarna.. a LOT!
waterfowlspecialist 7 months ago 3
@waterfowlspecialist kitos. Its alot but we have had alot of roplems with stihl 480fs.
keep rocking in the forest.
hyvä suomi.
Filasogen 7 months ago
så ägd erik
@silvferbielke
skate122 8 months ago
You call tell the operator really wanted that Stihl to win - he was really bearing down and trying hard to beat that Husky.
IIIBradIII 9 months ago
@IIIBradIII
off curse i wanted to win. I dont think anybody competes to loose. you don't eider.
Filasogen 9 months ago
how do you do muffler mods?
TheRob916 9 months ago
Meine 353 geht viel besser wie die in Video!
Gutbrod1030 1 year ago
hei hva er egentlig muffler mod? har hørt det før men skjønner ikke hva det er. har en 260 jeg også med en 15'' oregon sverd
MrStihlms260 1 year ago
Det är när man öppnar ljuddämparen till en viss yta i jämförelse mot vad original ytan är i cylindern tex 200mm2 så ska det vara 80% av den ytan för att den ska gå med ett visst mottryck. och det motrycket motsvarar 80% av avgasports ytan mot kolven. Det gör att motorn andas lättare och då kan den varva mer och i sin tur ändra hur fort du sågar med några sekunder. Men du kan nog åka på att ta bort plast stoppen som sitter på förgasaren för att kunna ge den mer bensin.
Filasogen 1 year ago
lär dej och fila istället
silfverbielke 11 months ago
@silfverbielke ja du kan ju säkert det då. då du verkar vara i moped ålder så skaffa dig en såg. nu är det så att jag sågar motorsåg/röjer professionellt. Så jag vet att en vass kedja är mycket viktigare än en vass motor men om man har båda så har man ju alla fördelar. Se så är den en gammal video. och vi hade jobbat så det var paus underhållning.
Mvh Filasågen
Filasogen 9 months ago
@Filasogen aa ja kan fila, vad spelar ålder in? ,
silfverbielke 8 months ago
@silfverbielke joo men då är vi överens. jag vet inte, kan du fila så är det väll bättre för dig. Men jag tycker nog att det är lite schizofren att säga lär dig fila när det är tre stycken som sågar. det är tre olika filare så jag fattar inte. Men jag antog att du eftersom du på lin kanal visserligen, skriver att du är sexton år så antog jag att du inte har jättelång erfarenhet. Och därmed försöker att hävda dig på internet. Men jag får väll säga lycka till med sågningen och ha en bra veka. Mvh
Filasogen 8 months ago
@Filasogen Får väll lägga upp en liten film från våran ved produktion -11, 170 m3, egen byggd skogsvagn, mm. ålder spelar ingen roll mannen ! därimot kunskap, Erfarenhet kan vara dålig, inte enbart bra...
silfverbielke 7 months ago
jaha, jag ids inte bry mig. 170m3 är ungefär en 20timmars jobb vid en vedmaskin. jaha nå vet jag int om det är lönt och tjafsa om hur dan du är jag tycker bara att "lär dej och fila istället" är en så in i fitton dum kommentar.
nuf said
Filasogen 7 months ago
@silfverbielke Vi är förväntansfulla. Vad månde denne begåvade yngling förmå att filma/uploada som imponerar på oss gamla gubbar.
nyhage1 7 months ago
the comparisson is not concludent: the saws are from different classes(260 should be compared with 346xp), the chains are not new and probably not sharpen and they should be of the same type and manufacturer, the gas and mix oil should be the same, and the saws should be as new as possible. by the way ... stihls are more expensive here in romania. the average difference is around 50-100euros.
ctgabi 1 year ago
@ctgabi Okay, ctabi thank you for the information. And i know that the saws are not comparable to etch other. But it was a funny video. One thing i think its weird is that the Stihl is more expensive in Romania than here, but i suppose that's because of Husqvarna have its home market here.
Greetings from Sweden and good luck.
Filasogen 1 year ago
the price difference is not that big in romania.it s around 10-20 euros the most between saws from the same class.the thing there,i believe is that the saws have almost the same power and the difference is made by the chains.that husqvarna cuts a lot faster than the stihl normaly,stihl are a lot lazier.by the way,that 260 is ported?
TheDraganflorin 1 year ago
@TheDraganflorin No the 353 is not faster by any means. The 260 is more copareble to 346. But the chains did make a big difference. The Stihl is not ported yet. but when the warranty ran out i will port it, but it is in fact muffler moded. . My 260 revs more now then it did there abut 15000rpm.
Filasogen 1 year ago
the price difference is not that big in romania.it s around 10-20 euros the most between saws from the same class.the thing there,i believe is that the saws have almost the same power and the difference is made by the chains.that husqvarna cuts a lot faster than the stihl normaly,stihl are a lot lazier.by the way,that 260 is ported?even my 435 cuts faster than the 353
TheDraganflorin 1 year ago
i had a stihl 181 C-BE its a hobby saw an she is better a stihl 260
Mosat100 1 year ago
none of those saw's look sharp, those results totally down to which one was most blunt
totalnz 1 year ago
yes thy are not the sharpest but we dont have the hole day to sharpen and we had a brake . tank you from Sweden.
Filasogen 1 year ago
@totalnz the last one looked most blunt
BriggsMower 1 year ago
@BriggsMower yes and its a hobby saw for a almost third of the price of the others.
Filasogen 1 year ago
@Filasogen ok
BriggsMower 1 year ago
Stihl rules, you Husky fools!!
MostShady1 1 year ago
Is a German Stihl really cheaper in Sweden than a same class Husqvarna? I mean Husky is made in Sweden. And I never get the reason why Husqvarna is 50% cheaper in the USA than in west-Europe.
NederSaks 2 years ago
i know its weird but it is. Husqvarna is more expensive a good comparison is the 346xp with is about 900euro but the same class Stihl 260 is 500euro.
And it continue to the bigger classes but the ms880 and the 3120 is pretty much the same in price but who uses them.
But i think that stihl want a market share in Sweden and that's reason of the price. We all has our own brand and hold them close to our heart
best wishes from Sweden
Filasogen 2 years ago
Comment removed
ctgabi 1 year ago
Were all chains brand new or?
Yeah I have a 353 e-tech on Aspen, never problems with it, air filter keeps very clean, easy start. Off course new chains and a blade sometimes.
I've never had a Stihl saw, but I've seen a lot of them broken with damaged pistons in dealer's workshops, their air intake sucks dust, they have only made that better a few years ago.
NederSaks 2 years ago
pretty much so. my stihl was brand new and the huskvarna is not old but driven much more then my stihl and the partner is 6yrs old but i think that the air cleaning is better on the huskvarna but the stihl is cheaper and fast, lighter but more fragile. but the are all god saws in different classes.
cheers from Sweden
Filasogen 2 years ago
husqvarna is 10 times better than a stihl, saw, in my opinion it husky means, technology, better relation weight/ power and versatility. All my votes for husqvarna.
lesterrafael 2 years ago 2
I like stihl the most but its no wrong whit husqvarna, but i think they are to expensive and don't give the right weight/ power for the money. but that's my opinion and you have yours.
Filasogen 2 years ago
stihl all the way baby!
boosborne 2 years ago 2