UTG mk96 sniper rifle review(part 1)

[Airsoftstar2154]

The small one is for the adjustment of the cheek rest

[drumer966]

Your a fag

[johnnyrojr]

The small Allan wrench is for the hop up system located near the clip release

[SuperJman4]

r u like 5?

[SnakeMGS7]

im sellin mine so check out my vid for more info a package is included with it

[ThePsychomunky]

everyone who is hating on him

STOP BEING SUCH AN ASSHOLE

[ShadowDark3]

@ThePsychomunky Have you read this kid's responses? He is just a big a douche as the people who hate him, if not bigger.

[TheAcslator]

When you ordered it how long did it take to get to your house?

[drumer966]

That's not an mk96 dipshit it's a well l96 I have the same 1

[girafeOsniper]

@drumer966 no its an mk96 dumb shit it go to the link in the description dumb ass

[n0ob130wn4g3]

@girafeOsniper actually its the same thing l96 and mk 96 are the same

[dog33100]

@girafeOsniper it is either

[SuperJman4]

@girafeOsniper No link

[DeathfallStudios]

@girafeOsniper both of you are dumb shits a well l96 and mk96 are the same fucking thing the well l96 has a few adjustments to the disassembly unit.

[iphoneaddict2]

@girafeOsniper um actually i have an offically lisenced one it has l96 on it :P

[dog33100]

@drumer966 it is either ya retards and its manufactured by utg so get ur facts right

[ArrowOfFortune]

@drumer966 they are all clones the look the same its a UTG MK96

[skonig77]

@drumer966 look at the fuckin box!

[killer231233]

@drumer966 i got that same one it is a mk96, this is not black ops dumb ass

[GuitarMaster1829]

Haha the other alan wrench is for the hop up

[girafeOsniper]

@GuitarMaster1829 thanks dude!

[TheBioBeast]

@girafeOsniper Also, nice review.

[AnacondaAirsoft]

the guns bigger than the kid hahaha lol!

[girafeOsniper]

@AnacondaAirsoft Haha dude can you post a video of you with an airsoft gun and then ill make fun of you ok sounds good!

[bivade]

i´ll be trollin!

[youngerjeezy123]

just so you know you made a great choice i know pros of airsoft wh use this gun i use it to its amazing

[TheSnarfal]

do u lube it and how much do u lube it and how ot u take care of the gun

[bigredfish8]

that small allen key is for the hop up adjustment dude

[UltimateLegoDude]

how much did it cost?



[cmzangetsu1993]

to ease your bipod worries UTG makes real steel accessories too and im sure that bipod will hold up

[hunterplanb]

hey man dont werey about all of them dumbasses there just jealious and to damn poor to affored one so just tell them to go fuck there self im sorry people have to be such asses good job with the video

[capriotti98]

wow u suck i thought u were a girl reviewing this video ur a homo

[Whatthejizzman]

@capriotti98 Your cool

[CtrolokDoncov]

@capriotti98 yeaaaaaa!!!!!!!!!

[girafeOsniper]

@capriotti98 wow you call me a homo, this video was made 3 years ago and the only video you have is your faggot gay friends pretend fighting each other or what ever the hell you want to call it. your a fucking faggot you bitch cunt face. by the way i thought you were a girl in your video because your voice was so fucking high you bag of douches.

[LordLazerPants]

@girafeOsniper watch ur mouth. lol i have no right to say that ... may i troll? k. tnx. LOLOLOLOLOLOLOLOLOLOLOLOLOLOLO­LOLOLOLOLOLO

[TheBioBeast]

@girafeOsniper The little child is born in 1998. Cba doing math, but how old is he? 12? 11? Fuck him :P 

[SEALboy98]

@TheBioBeast 12 or 13. im 13 but everyone thinks im 14 or 15 cuz im just that bad ass.. but i hav 2 admit that this guy sounds like a major faggot from his comments

this gun looks pretty sick im gonna get it from gi but im thinking bout the echo1 m4 instead

[apachemiller97]

the one screw is for the hop up ya fraekin idiot

[hunterplanb]

@apachemiller97 lay off

[Unboxerr]

who the hell would make fun of you.. my god im probably older then you but i sound younger..

[Drift2Niconocuchiha]

wHERE AND hOW mUCH??!

[Whatthejizzman]

@Drift2Niconocuchiha Airsoftgi around 130-50

[cmzangetsu1993]

@Drift2Niconocuchiha what?

if your asking where to get it You can get it at Evike for around 80 ish it might be more

[mattmattduck]

WO! i have a question when u opened the box there was another scope why did u buy 2?

[TheUIN17]

how much

[lazrawk]

Do it on a table don't crawl around <Tip, not complaint

[yourfuckinghott]

you suck dude...

[HappyModder]

does it hurt?

[BUNNYSKATER1]

@HappyModder ya dude it does i shot someone with it makes them bleed

[DoubleBgVenom]

hey good to start airsofting when yo young

[presson100]

Ok I'm sorry I'm being a troll but 1 don't make up what ur going to say as u make the vid 2 aeg are beter than snipers sur snipers are cool but there over powered all r

The time be some dude with u full auto gun all they have to do is what for u to shoot then they send of 5 shoots befor u even get two

[AirsoftDigital]

@presson100

Dude your second paragraph makes NO SENSE WHAT SO EVER! Please learn english before insulting someone's video.

[abc123boybmx]

nice vid im getting the gun when i have the money, a lot of people said is was great except the bipod mess's up on you ? has this happened to you?

[wasandd]

a bit of advice, dont bother explaining the speed loader, nothing of importance. lol i like your optomism of how the bipod wobbles :P. and in terms of video: practice your video or make a script like talking points so there is less "uhmm" and "like". (my own grudge is that i like high quality camera's but yours is ok) all in all you did a good job on the video, kudos

[airsoftjunky26]

Justin Bieber? =)

[xlilCheesiEitxX]

uhhh u mean L96 Arctic Warfare

[96amadeu]

word of edvice dont use that sling. its really cheap. my friend almost dropped his mk96 when the sling broke.

[JamesChrist95]

the smallest allen wrench is for the small screws along the side of the gun

[reptileboy9111]

how old r u ....8.....7

[onendone10]

hahaha u do sound like your 8 hahahahahahahahaha

[rockinsk8er87]

how much did it cost?

[worganyos]

i cant get the mag in... do you have any idea why?

[EkkuZakku]

@worganyos I heard the mags are a bit of a snug fit, you can maybe sand down the sides a bit to make them fit or use some sort of lubricant to help it go in, although if it is really tight then it might not come back out.

[MrRobertmason]

the lil allen key is 4 the hop thst is behind the mag

[outdooresman75]

how hard is the bolt to pull back plz respond

[RaidenAutoblog]

who the hell cares about the box!!!!!

[2bad4god443]

lol ur not even allowed to have that gun

[Musterdpotato]

@2bad4god443 You are so very true. Last time I checked, airsoft guns were classified as "pressurized firearms" and you have to be 18 to own one (in my state, at least). It's very irresponsible of a parent to let their child play with them. Especially without basic knowledge of gun safety (regardless of if it shoots bbs or real ammunition).

[slipnonets47]

@Musterdpotato Who cares? Honestly its better that he is doing this then out there doing drugs, and besides... He obviously earned the right to have this gun with his parents. You shouldnt assume the worst.

[Musterdpotato]

@slipnonets47 Perhaps you're right. I shouldn't be so judgmental.

[Ge0Sh0t]

Removable Butt Plates=win

[808hawaiiboi96734]

does a scope come with the gun or do i have to buy one seperatly? sorry if its a dumb question. but nice vid thx

[tommy42993]

mmmmm removable butt plates and adustable cheek rests. and the "allen wrench" is for the hop up adjustment

[Chriskw25]

should i get this or aeg?

[shvivtyteenTV]

is wd40 like silicon spray?

[girafeOsniper]

@shvivtyteenTV no its not at all

[96amadeu]

@girafeOsniper were can i get silicon spray?

[IKameAndKilled]

@96amadeu You can get it in alot of places like off the internet or in airsoft specialty stores

[96amadeu]

@IKameAndKilled thanks

[airsoftjunky26]

Justin Bieber? =)

[tpwne]

@airsoftjunky26 haha lets hope justin bieber gets a real L96 and shoots himself in the face lol :D

[IKameAndKilled]

@shvivtyteenTV its a un-ruster/lubrication aide (not like silicon though) I WOULDN'T use it to lubricate a spring or something. I wouldn't even use it in the gun, it probably isn't good for it

[Dragoneylan]

No. It a spray lubricant.

[2066241]

@shvivtyteenTV silicon spray is a heavier rubbery lube, WD40 is worthless for airsoft..Spend a dollar more and get silicon trust me!!!

[cmzangetsu1993]

@shvivtyteenTV dude if you use wd40 it will gunk your gun up and ruin it

silicone is as it says straight silicone

WD40 has tons of other stuff in it that is used to remove rust and stuff

[TheAirsoftey]

ha ha how old are you cus youlook young but you realy sound like you know what your talking about.

[FarmerGriff]

cane toad launchers are more fun.

[JohnB0t]

u are 8 years old.

[ThePeoplesGaming2]

@JohnB0t he is 9 years old

[daikon555]

What are you? 8?

[topflytyer]

amazing video you did a really good job!

[jdmTureno]

that gun is so sexy i cant w8 till mine comes

[qouted]

that 1 allen wrench is fer da hop up

[Mw2god13]

me too im also new to airsoft and close to your age

[ipwnhancock]

allen renches r fer turningn things and makmaking them tight

[AVJMRC]

i am new to airsoft too

[stinkbug596]

hey 4 yr old the gun is longer thn you are!

[CAsoccerr]

@stinkbug596 i wish i was as cool as you and could criticize people on youtube,

ps. get a life loser

[airsoftmany123]

@stinkbug596 hey faggot my finger is longer than your dick and im 14

[vVKingNothingVv]

@airsoftmany123 someone got a little fisty, couldnt handle the internet

[mcguv10]

Hey how do remove the hop up from the inner barrel, if any1 can help THANKS!

[mcguv10]

Hey how do remove the hop up from the inner barrel, if any1 can help THANKS!

[shootinstyx]

im not 100% sure @XxDRUMMERKIDxX96 but Hop Up increases and decreases the spin on the bullet.. increases acreasy decreses fps... i think.

[XxDRUMMERKIDxX96]

i know i sound like a douch but wots the hop up (never taken intrest in airsoft)

[SKULLFEAR]

its what makes the bb curve upwards to the middle of your sights (something like that)

[FATAIRSOFT]

its usually a tube or it kind of looks like a pipe elbow and when the hop-up is up it has a greater back spin witch "usually" makes the bb almost after 50 ft go at a forty five degree angle and when then hop-up is down it puts a front spin and makes it go down just a tad. but all guns are different so you dont sound stupid dont worry!

[girafeOsniper]

@XxDRUMMERKIDxX96 its a piece of rubber in the barrel the can be adjusted to put various amounts of backspin on the bb for the best possible accuracy

[ryanctf]

@XxDRUMMERKIDxX96 hop up is where it puts backspint or forespin on the bb to make it spin up or down for at long ranges.

[Mrflya]

yer yous 25 grm or 28 fck u clips are not the same magazines are the word i know because my dad was a royal marine ther like the sas (special forces)just a bit better i know it sounds crazy but its true

[LtColPayPay]

if you love sniping get this gun its good for defending

and the m324 by utg if u like to rush with a sniper. do some no scopes lol jk

[13ElCapitan]

no they are magazines. clips havent been used in guns for a long time. its not an option to call it a clip because it is incorrect. learn something about guns before you try to say that someone else is wrong. oh btw i understand that you are new to airsoft and you dont know some of the vocab lol but its fine nice vid im gona get this gun cuz it kicks ass lol

[TheAirSoftDude15]

Your a dumb ass mk they can be called clips

[mkhd4]

dude i cant wait to get my mk96/l96 i love sniping!!!!!well doesnt everyone?

[mkhd4]

ther're called magazines not clips!lol

[SecretOperations]

get 0.28, 030 gram devil bb's they are very accurate

[pimpdaddy117]

i am getting this gun in tan

[xx77kediha77xx]

Im getting some bbs and im getting an aeg and a sniper and im not sure if i should get .23 because its cheaper and it has some of the range of .2s and some of the range of .25s and i want to know if it will affect my accuracy for my sniper a lot or its not even noticable

[MagicalSHEEP]

That little allen wrench is to ajust the hop up. its near the mag!

[RetartedStormtrooper]

Yeah, use .25s or even better, .28s

[Freakydude013]

i just got this gun wut kind of bbs should i get i just bought .20bbs but idk if thats good enough

[oooskin]

you should get .25 therre more accurate

[ALWAYSATHREAT]

how much was it

[cas123321]

TROLL: here's some advice: why don't you stick it up your ass.

LOL

ANy way good video, I want to get that thing now.

[XMONSTERPRODUCTIONX]

how far should i put the hop up with 28g's?

[airsoftL96sniper]

lol u got to do all that stuff urself....every gun is different

[LegitAirsoftReviews]

@XMONSTERPRODUCTIONX

Unitl your BBs go straight.

[nitromehane189]

this is wat i recommend: get a harris bipod from like airsoft GI. u also need a harris bipod RIS adapter rail. just search up harris bipod adapter on amazon. by one of thoughs so u can attach it to the tri rail. it will bi rock solid. and i mean rock solid. but harris bipods can range between 30-100+ dollors. buy one from dicks sporting goods for like 60 dollors and u will be all set

[Dandjl]

small silver allen is for hop up in hole in front of where magasine

[cessnaoneeightytwo]

i got mine from pyramydair

[thelegobrain]

If you are new i strongly reccommend using a full auto for your first wars. the reason is is that airsoft sniping is a very difficult weapons group that is not for everyone. but if you are good with this sniper i would strongly reccomend you get a small full auto to carry as a backup weapon. I personnaly use my cybergun m1a1 thompson. So from an experienced airsoft player, Best of luck on the feild. Remember have fun. Oh and by the way, this is the gun im gonna buy soon so thanks for th review

[rsmoment2450]

yeah if you are sniping you have to be prepared to sit still for a while

[wowgamer53]

i think .28 are better than.30

[blackwallstreet49]

when u unscrew the bolts or w/e u hold the long side of the thing that unscrews it , its easier kids like seriously u guys r like 8 year olds and the camera man has an ugly accent and voice and dont use the bbs that comes with the gun they suk

[CAsoccerr]

@blackwallstreet49 Dont criticize if you dont like the video is it that hard of a concept to grasp

[airsoftL96sniper]

i never said that that was good 4 ur gun i never said any thing bout the g.. bbs....i use the .30 though

[johnbeach82]

hey, just some advice try to aviod using words like thingy or stuff be more intellegent use words like mechinism or attachment and people will respect your videos more also talk continously but dont say uhh or umm . practice your videos. it really does help. Thanks for the review

[guyairsoft]

the allen wrench you didnt know what it was for is for the hop up just in front of the mag relece

[tier88]

just order 1 ^^ . so i probly got the sniper  for 1 veack

[WilliSuperFlY]

is there any maintenance that you need to do for this gun? if so what?

[xJakexTM]

alright, i agree. no spamming so dont reply to this. k?...

[xJakexTM]

dont make fun of me or call me names. you offended me by your trolling. shut up.

[Bassmasterlukester21]

no the small wrench is for the hop up in the mag chamber under the scope wher the mag goes. look up how to use it

[haruko619619]

u use the small one to adjust the cheek rest dude

[xJakexTM]

WELL L96. same thing

[haruko619619]

No...its not. If its made by Well its not the same. different quality ranges. Just because its the same model doesn't mean its the same gun and its ignorant of you to even say that.

[xJakexTM]

ignorant? hahaha. dont start a fight here on youtube. thats retarded.

[rawrplex]

why does this guns OD color look so ugly in this vid?

[pancakesrulz]

why do you always have to say ``thingy``...ith feauteres a double trigger..system...thingy... wtf? anywayz....cuz your new to airsoft...welcome to airsoft world :D

[cheekyboyclan]

sweet airsoft rifle and nice reveiw i gettin this

[rileyd22134]

nice review on the gun i just got the gun today..

[labtop123]

mid dot alluminated or just printed crosshairs

[labtop123]

what kind of scope

[xJakexTM]

3-9-40 scope

[TheBoomed]

nice review.

[thesniper1191]

i read the annotation, but at the time of the filming of your video: haha you dont know what an allen wrench is for :3

[Anon997]

why are all the reviews on this gun by 10 year olds

[ninja6488]

is it ambidexterous for the handle

[TheAlsat]

haha, 1:26 :P

[daricen]

not a bad review. i racomend your next review involves you shooting the gun.

[phantomzassassin]

lol the other allen key is for the hop up its not hard to figure out did you even bother to read the manual for the gun as u seem to not know much about it

[captaingradetwo]

ease up. he's new to airsoft. if you would pay attention it says in the description and in the beginning of the video he knows what that allen wrench is for

[Notyouisme]

Where did you got it ?!?!?!?!

[JBKZSPrunescaperz]

where did u get it?

[TheAirsoftpimp]

aaaaaaaaaaaaaah

[ninjafrog59]

how much was it?

[MrNeekit]

thprosk8tertony...no offense but wht ur saying is retarded u never use .12 especially with a sniper like this...u wont even hit ur target unless there like 25ft or less away from u....and it will mess ur gun up eventually....u r suppose to use at least .25g or higher with 400 fps snipers.

[thprosk8ertony]

U should use 0.12 gram bb's....they are much lighter and the FPS will incerase

[7updude]

but accuracy will decrease.

[thprosk8ertony]

Yea i know but if u want max FPS use .12 gram

[sn1p3f0rv1ct0ry]

and with guns over 300 fps ur supposed to use .2 or higher or else it will ruin ur gun.

[XairsoftplayX]

Dude... if you play airsoft, your a DUMBASS.... ,12's will ruin your inner barrel and destroy your gun.... idoit..

[thprosk8ertony]

so i can just buy miself a fuckin new one numb nuts....

[XairsoftplayX]

yeah waist your money instead of using 0.25g +...... Your smart, No really... YOU ARE SMART

[thprosk8ertony]

I KNOW I AM!!!! ITS COOL ISNT IT

[XairsoftplayX]

... i have nothing to say, nothing.

[thprosk8ertony]

GOOD U DUMBSHIT

[CODING247ON360]

haha, retard

[CODING247ON360]

haha retard

[CODING247ON360]

lol, you got it right, im only using atleast .23 grams in my sr 25 but mainly .25s

[XairsoftplayX]

i can see how smart you are compared to thprosk guy here